• Journal of Physiology & Pathology in Korean Medicine
• /
• v.30 no.3
• /
• pp.190-200
• /
• 2016

The aim of this study was to suggest the standard process in developing Questionnaire of Pattern Identification (QPI). The process in developing QPI was researched from validated and developed questionnaire and the standard process in developing QPI was suggested through review of the experts in research, statistics and clinics. Check list was also provided. The number of QPI reviewed in this research was 17(4 in disease in Korea Medicine, 5 in Pathological symptoms, 6 in Sasang constitutional Diagnosis, and 2 in etc), The standard process in developing QPI consisted of 11 phage and 33 check lists. 1) Composition of Research Member(3check lists), 2)Set up of the Aim(5), 3) Review for advanced research(3), 4) Finding an Important Index(3), 5) Review of item selection(4), 6) Developing the questions using items(5), 7) Developing Draft of Questionnaire(2), 8) 1^st Survey of Reliability and Validity(2), 9) Revision and Correction of Item(1), 10) 2^st Survey of Reliability and Validity(2), 11) Completion and Application(3). This study suggests the standard process in developing QPI for the first time in Korea. This following step may help A new QPI development.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.158-159
• /
• 2014

There is urgent for defect consulting work to standardize the investigated method, repaired and reinforced method, and estimated cost about defect in increasing a defect lawsuit of apartment building. For the purpose of developing the standard process of defect consulting work, the review that a used process in law and institution should take precedence. There is not prepared the national standard for defect consulting but is dependent on an experience and a practice of consultants. This study analyzes defect consulting case, defines main steps for developing the standard process, and draws phased work factors. As systemizing this, it is expected to apply to basic structure for developing the standard process of defect consulting work for the next.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.05a
• /
• pp.258-259
• /
• 2003

• Proceedings of the Technology Innovation Conference
• /
• 1999.06a
• /
• pp.176-202
• /
• 1999

Korea has exerted her efforts to assimilate nuclear power technology, and reportedly localized 95 percent of nuclear power technology by 1995. This paper investigates the evolution of nuclear power program in Korea to exploit the development process of the nuclear power industry and key factors for the technological localization of nuclear power plant. In developing countries, an imitative catching-up process can be shown as a course for developing the absorptive capacity of foreign technology, which depends on prior knowledge base and the intensity of effort. The process of technological learning consists of five stages including preparation, implementation of foreign technology, acquisition of peripheral technology, acquisition of core technology, and improvement f foreign technology. Moreover, this paper discusses six essential factors that have influenced the successful achievement of technological localization of nuclear power plants in Korea. They include the role and strategies of the government, the leading role of utility firm, the development and cooperation of the related organizations, the development of human resources and their efforts, market conditions and the assistance of foreign donors, and social conditions. Finally, this paper discusses about implications offered by the Korean experience for other developing countries.

• Journal of Environmental Health Sciences
• /
• v.23 no.1
• /
• pp.34-42
• /
• 1997

A laboratory experiments were performed to investigate the treatment of photographic processing wastewater by chemical oxidation and biological treatment system. The effect of reaction conditions such as hydrogen peroxide dosage, ferrous sulfate dosage and pH on the COD removal in Fenton oxidation were investigated. The optimal dosage of hydrogen peroxide was 2.58 M and 3.87 M for the developing and fixing process wastewater, respectively. The Fenton oxidation was most efficient in the pH range of 3-5 and the optimal condition for initial reaction pH was 5 for a developing process wastewater. With iron powder catalyst, the COD for a developing process wastewater was removed in lower pH than with ferrous sulfate catalyst. The removal efficiency of COD for refractory compounds such as Diethyleneglycol, Benzylalcohol, Hydroxylamine Sulfate, Ammonium Thiosulfate, Ammonium Ferric EDTA and Disodium EDTA in the photogaphic wastewater was found than 90% except Potassium Carbonate. When the photographic processing wastewater after pretreatment by Fenton oxidation was treated with batch activated sludge process, the addition of $KH_2PO_4$ as a phosphorous compound improved the removal efficiency of COD. During the continuous biological treatment of developing and fixing process wastewater after pretreatment by Fenton oxidation, the effluent COD concentration less than 100 mg/l was obtained at 0.425 and 0.25 kgCOD/m$^3$.d, respectively.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.299-307
• /
• 2016

In order to clarify the availability of heat treatment for catechu dyeing, effect of color developing by heating process on cotton fabrics dyed with catechu extract was investigated. Dyed fabrics were heated various time(min) at $150^{\circ}C$. The cases of non-mordanting and mordanting were compared, and examined the effect of sodium acetate as an agent to promote the color developing to fabrics. Experiments with after-mordanting method showed that various colors can be obtained using catechu. K/S values of dyed fabrics with Al, Cu, Fe mordant were higher than the case of no mordant. The fabric by Cu mordanting showed 3 times to the case of no mordant. Fabrics dyed with catechu by mordanting lowered $L^*$ value while there was little change in $a^*$, $b^*$ value as the heating process progressed. Therefore, K/S values were increased due to heating process. The effects of adding sodium acetate in dyeing bath on dyed fabrics were shown higher K/S values, and the $L^*$ values were lower than those without sodium acetate according to heating time increase. The result show sodium acetate had a promoting effect on the color developing to the fabrics by heating process, it was very effective.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.56-64
• /
• 2013

In order to examine the availability of color developing for prepared persimmon extract powder dyes, purified and freeze-dried powder from immature persimmon fruit. The cotton fabrics dyed with 1% concentration of powder dyes. This study was conducted to examine into the color developing effects of the powder dye for the dyed cotton fabrics irradiated with xenon light. Powder dye is difficult to dissolve in water resulting in a colloidal and viscous solution. The problem of solubility in water was resolved by setting the dyeing conditions by wetting the dye with alcohol in advance and dissolving in warm water($50{\sim}60^{\circ}C$). Samples had no alkaline conversion in making process of powder dyes showed high color developing effect(${\Delta}E^*$, K/S). Samples showed decreased ${\Delta}E^*$, K/S with increased alkaline conversion in making process of powder dyes. Samples that had alkaline effects displayed easy early color developing to be advantageous in the process of natural pattern in art work.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.197-204
• /
• 2010

This study explains the planning practical training that researches the process of functional game planning approach by developing functional games. The main focus of this study is the practical training process of planning which is an important part of game development jobs by developing games with proper functional materials, 'Framework of Planning Functional Game', and the verification of framework by developing functional games. This paper suggests that the functional game planning approach with the right function requires progressive/quantitative standard, which is different from typical process. Therefore, this paper is useful as reference materials of a functional game education through the cases of games developed by the progressive/quantitative approach standard.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.401-413
• /
• 1996

This study is aimed to be helpful a developing process for Apparel design and to investigate Idea abduction for Apparel Design which applied to the Morphological Method one of the Methods of Creativity which the creative technologists studied. The result of this study were as follows : 1. The Morphological Method which is one of the Methods of Creativity could be applied to Idea abduction for Apparel Design by CAD system. 2. This study developed a program for CAD system which could use the design process for Apparel Design applied to the Morphological Method 3. In the consequence of the program which could use the design developing process of Morphological Method, and trying to test with the selection of the essential variables about Jacket, Skirt, One-piece, Blouse, it is found that many design for Apparel Design could be producted in a short time, so that the conclusion have been made as a result that the Method could be a great help to design a variable sillouette for Apparel Design.

• Journal of architectural history
• /
• v.15 no.4
• /
• pp.7-22
• /
• 2006

The purpose of this study is proposing a method of developing experience program for organizing continuous 'Recreating Cultural and Traditional Village'. Therefore, with having purpose of developing experience program which is deeply related with residents organization and architecture in the village, the researcher has participated in '2005 An-dong Gunjamaul Recreating Cultural and Traditional Village', accomplished developing experience program which can continuously manageable by residents and space and facilities which are accompanied with program. The results of this research are as follows. The developing process of experience program has four phases, selecting program, planning program, growing and changing program, and practicing and firmly establishing program. Moreover, the relationships between space planning and setting up a resident's organization and the experience program need to be considered. The things that experts have to consider are come up with three subjects. First, planning experience program with citizen participation. Second, designing experience program with spaces which will contain the programs. Third, developing programs which are accompanied with rediscover village's resources through continuous feedback.