• Korean Journal of Animal Reproduction
• /
• v.20 no.4
• /
• pp.427-432
• /
• 1997

These studies were performed to approach the precise pathway inducing the meiotic inhibitory action of hypoxanthine on mouse follicular oocytes and to identify the cause of detrimental effect of hypoxanthine on viability of the oocyte in vitro. In addition, a correlation between the meiotic inhibitory effect and the detrimental effect of hypoxanthine was investigated. Mouse follicular oocytes at germinal vesicle(GV) stage were collected from the ovaries of ICR mice by puncturing the antral follicles with a fine needle, at 48 hours after PMSG injection. Oocytes were cultured in Modified Whittingham's T6 media containing hypoxanthine and several materials that involved in metabolism of hypoxanthine, and the effects of the materials on the actions of hypoxanthine were investigated by observing germinal vesicle breake down (GVBD), 1st polar body (PB) extrusion and viability of the oocytes. Phophodiesterase significantly reduced the meiotic inhibitory effect of dbcAMP but did not influence on the inhibitory effect of hypoxanthine. Allopurinol and 6-MP significantly enhanced the meiotic inhibitory effect of hypoxanthine, but the materials themselves also showed the meiotic inhibitory action like hypoxanthine. Hypoxanthine-guanine phosphoribosyltransferase significantly enhanced the meiotic inhibitory effect of hypoxanthine, on the contrary HGPRT itself promoted meiotic resumption of the oocytes. Catalase did not induce any change in the meiotic inhibitory effect of hypoxanthine, but SOD increased the GVBD rate suppressed by hypoxanthine. The detrimental effect of hypoxanthine on viability of the oocytes was significantly reduced by allopurinol and catalase, but SOD increased the GVBD rate suppressed by hypoxanthine. The detrimental effect of hypoxanthine on viability of the oocytes was significantly reduced by allopurinol and catalase, but SOD did not reduce the deterimental effect of hypoxanthine. In conclusion, the meiotic inhibtory effect of hypoxanthine may be caused by guanyl dervartives converted from hypoxanthine via salvage pathway, and superoxide anion may partially participate in the inhibitory effect of hypoxanthine. The detrimental effect of hypoxanthine on viability of the oocytes be cused by hydrogen peroxide produced during the metabolism of hypoxanthine.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2015.11a
• /
• pp.109-110
• /
• 2015

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.05a
• /
• pp.107-108
• /
• 2016

• Reproductive and Developmental Biology
• /
• v.33 no.4
• /
• pp.217-222
• /
• 2009

The purpose of this study is to evaluate the effects of alcohol or cigarette smoking on seminal parameters in a large group of mice model. Nine groups (n=20/group) of mice were treated intensive noxious materials that abdominal injection of 21% (v/v) of ethanol, cigarette smoke (10, 20, 30 minutes/day), and combination of ethanol and 30 minutes of smoking. In addition, vitamin C and selenium were also treated to mice exposed to combination of alcohol and smoking to identify the recovering effect. Sperm viability and motility were significantly decreased in either alcohol consumption or smoking exposed group, and combination of both materials have additive detrimental effects on seminal parameters. Mice groups that exposed to alcohol and smoking showed statistically significant decrease in motility and increase of static spermatozoa. Moreover, combination of both treatments showed cumulative effect in increase of static spermatozoa. Treatments of either vitamin C or selenium dramatically recovered detrimental effects of alcohol and smoking on seminal quality, although combination of both antioxidant molecules did not show any additive effect. In conclusion, detrimental effects of alcohol and cigarette consumption on sperm quality and motility were identified in mice model, and these detrimental effects can be compensated to uptake of anti-oxidant molecules.

• Journal of the Korea Concrete Institute
• /
• v.11 no.6
• /
• pp.79-88
• /
• 1999

In this paper, the electro-deposition method for the rehabilitation of cracked concrete, based on the electro-chemical technique, is presented. The main purpose of this paper is to apply this technique to reinforced concrete members on land. After cracking with a specified load(crack width 0.5mm), 10$\times$10$\times$20cm concrete specimens with embedded steel bars were immersed in several solutions, then a constant current density between the embedded steel in concrete and an electrode in the solution was applied for 4~20 weeks. The results indicate that electro-deposits formed in this process are able to close concrete cracks and to coat the concrete surface and that formation of these electro-deposits is confirmed to have an effect of protection against detrimental materials. Therefore, it is demonstrated that the electro-deposition method can be usefully applied for the rehabilitation technique of concrete.

• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.8-16
• /
• 2013

As the energy consumption increases rapidly, power generation needs the high energy efficiency continuously. To achieve the high efficiency of power generation, the materials used have to endure the higher temperature and pressure. The 9-12%Cr steels possess good mechanical properties, corrosion resistance, and creep strength in high temperature due to high Cr contents. Therefore, the 9-12%Cr steels are widely used for the high-temperature components in power plants. Even though the steels usually have a fully martensitic microstructure, they are susceptible to the formation of ${\delta}$-ferrite specifically during the welding process. The formation of ${\delta}$-ferrite has several detrimental effects on creep, ductility and toughness. Therefore, it is necessary to avoid its formation. As the volume fraction of ${\delta}$-ferrite is less than 2% in microstructure, it has the isolated island morphology and causes no significant degradation on mechanical properties. For ${\delta}$-ferrite above 2%, it has a polygonal shape affecting the detrimental influence on the mechanical properties. The formation of ${\delta}$-ferrite is affected by two factors: a chemical composition and a welding heat input. The most effective ways to get a fully martensite microstructure are to reduce the chromium equivalent less than 13.5, to keep the difference between the chromium and nickel equivalent less than 8, and to reduce the welding heat input.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.1-7
• /
• 2001

Use of high yield pulp and recycled fiber as raw materials and water system closure result in higher fines content and buildup of organic and inorganic contaminants in white water. These are detrimental for the effectiveness of chemical additives including retention aids. Thus it is imperative to employ a retention systems that maintains its efficiency in closed papermaking system for reducing fresh water consumption. The performance of four different microparticle retention systems including cationic polyacrylamide (C-PAM)/bentonite, highly charged cationic starch (HCS)/silica, C-PAM/micropolymer, cationic guar gum (CGG)/silica was evaluated and compared at three different levels of papermaking system closure. Buildup of detrimental substances in a closed white water system increased cationic demand and finally reduced the performance of retention systems. Cationic starch and guar gums maintained their effectiveness in retention in closed white water systems contaminated with anionic trashes because of their structural rigidity and hydrogen bonding ability. Particularly, cationic guar gums, due its stiffness of molecular structure, appeared perform better than catinonic starch.

• Structural Engineering and Mechanics
• /
• v.29 no.1
• /
• pp.1-16
• /
• 2008

Tunnels are generally constructed below the ground water table, which produces a long-term interaction between the tunnel lining and the surrounding geo-materials. Thus, in conjunction with tunnel design, the presence of water may require a number of considerations such as: leakage and water load. It has been reported that deterioration of a drainage system of tunnels is one of the main factors governing the long-term hydraulic and structural lining-ground interaction. Therefore, the design procedure of an underwater tunnel should address any detrimental effects associated with this interaction. In this paper an attempt to identify the coupled structural and hydraulic interaction between the lining and the ground was made using a numerical method. A main concern was given to local hindrance of flow into tunnels. Six cases of local deterioration of a drainage system were considered to investigate the effects of deterioration on tunnels. It is revealed that hindrance of flow increased pore-water pressure on the deteriorated areas, and caused detrimental effects on the lining structures. The analysis results were compared with those from fully permeable and impermeable linings.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.548-551
• /
• 2004

For the improvements in high transmittance, one of the most important factors of transparent dielectric is pore contents and pore size. This study have investigated the effect of frit size on the transmittance of zinc-boric system with a Pb-free composition. A mixed glass paste was used for thick films, which were made by screen printing methods on a glass substrate (PD200). These dielectric layers were measured for surface roughness, pores content and transmittance. The results show that increase of pore size and content have detrimental effects on the transmittance of films compared to those found in the PbO system.

• Archives of Metallurgy and Materials
• /
• v.64 no.2
• /
• pp.507-512
• /
• 2019

Ag and Cu powders were mechanically alloyed using high-energy planetary milling to evaluate the sinter-bonding characteristics of a die-attach paste containing particles of these two representative conductive metals mixed at atomic scale. This resulted in the formation of completely alloyed Ag-40Cu particles of 9.5 ㎛ average size after 3 h. The alloyed particles exhibited antioxidation properties during heating to 225℃ in air; the combination of high pressure and long bonding time at 225℃ enhanced the shear strength of the chip bonded using the particles. Consequently, the chips sinter-bonded at 225℃ and 10 MPa for 10 min exhibited a sufficient strength of 15.3 MPa. However, an increase in bonding temperature to 250℃ was detrimental to the strength, due to excessive oxidation of the alloyed particles. The mechanically alloyed phase in the particle began to decompose into nanoscale Ag and Cu phases above a bonding temperature of 225℃ during heating.