• Title/Summary/Keyword: detection abrupt signal

Search Result 17, Processing Time 0.025 seconds

Abrupt Noise Cancellation and Speech Restoration for Speech Enhancement (음질 개선을 위한 돌발잡음 제거와 음성복원)

  • Son BeakKwon;Hahn Minsoo
    • Proceedings of the KSPS conference
    • /
    • 2003.10a
    • /
    • pp.101-104
    • /
    • 2003
  • In this paper, speech quality is improved by removing abrupt noise intervals and then substituting the gaps with estimates of the previous speech waveform. An abrupt noise detection signal has been proposed as a prediction error signal by utilizing LP coefficients of the previous frame. Abrupt noise intervals are estimated by using spectral energy. After removing estimated noise intervals, we applied several waveform substitution techniques such as zero substitution, previous frame repetition, pattern matching, and pitch waveform replication. To prove the validity of our algorithm, the LPC spectral distortion test and the recognition test are executed and, the results show that the speech quality is fairly well improved.

  • PDF

On the use of numerical models for validation of high frequency based damage detection methodologies

  • Aguirre, Diego A.;Montejo, Luis A.
    • Structural Monitoring and Maintenance
    • /
    • v.2 no.4
    • /
    • pp.383-397
    • /
    • 2015
  • This article identifies and addresses current limitations on the use of numerical models for validation and/or calibration of damage detection methodologies that are based on the analysis of the high frequency response of the structure to identify the occurrence of abrupt anomalies. Distributed-plasticity non-linear fiber-based models in combination with experimental data from a full-scale reinforced concrete column test are used to point out current modeling techniques limitations. It was found that the numerical model was capable of reproducing the global and local response of the structure at a wide range of inelastic demands, including the occurrences of rebar ruptures. However, when abrupt sudden damage occurs, like rebar fracture, a high frequency pulse is detected in the accelerations recorded in the structure that the numerical model is incapable of reproducing. Since the occurrence of such pulse is fundamental on the detection of damage, it is proposed to add this effect to the simulated response before it is used for validation purposes.

Pitch Detection Using Wavelet Transform (웨이브렛 변환을 이용한 피치검출)

  • Seok, Jong-Won;Son, Young-Ho;Bae, Keun-Sung
    • Speech Sciences
    • /
    • v.5 no.1
    • /
    • pp.23-33
    • /
    • 1999
  • Mallat has shown that, with a proper choice of wavelet function, the local maxima of wavelet transformed signal indicate a sharp variation in the signal. Since the glottal closure causes sharp discontinuities in the speech signal, dyadic wavelet transform can be useful for detecting abrupt change in the voiced sounds, i.e., epochs. In this paper, we investigate the glottal closure instants obtained from the wavelet analysis of speech signal and compare them with those obtained from the EGG signal. Then, we detect pitch period of speech signal on the basis of these results. Experimental results demonstrated that local maxima of wavelet transformed signal give accurate estimation of epoch and pitch periods of voiced sound obtained by the proposed algorithm also correspond to those from EGG well.

  • PDF

Shot Boundary Detection Algorithm using Multi-Pass Mechanism (Multi-Pass 구조를 가지는 Shot 경계 검출기법)

  • Seong Changwoo;Kang Dae-Seong
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.1 no.1
    • /
    • pp.58-63
    • /
    • 2000
  • This paper describes an efficient algorithm for shot boundary detection in MPEG video stream. There are two types of shot boundary: abrupt and gradual. The proposed algorithm for detecting the abrupt shot boundaries used DCT DC value in compressed domain. The proposed algorithm of the gradual change detection consists of two-pass mechanism. In the first pass, the expected positions of shot boundaries are extracted using ratio value of motion vectors. After decoding frames that are extracted in the first pass, we will make the dissolving image using (n)th and (n+2)th image of expected position. The gradual shot boundaries are selected by similarity of the dissolving image and the image of (n+1)th expected position. As applying the algorithm for detecting shot boundaries, the gradual changes as well as the abrupt changes are detected efficiently. Experimental results indicate that the proposed method is computationally fast for detecting shot boundaries and robust to the variation of the video characteristic that is different for the kind of videos.

  • PDF

Fault Detection of a Gear with Initial Pitting using the Boomed Phase Map of Continuous Wavelet Transform (연속 웨이블렛 변환의 확대된 위상 지도를 이용한 기어의 초기 퍼팅 결함 진단)

  • Lee, Sang-Gwon;Sim, Jang-Seon
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.25 no.11
    • /
    • pp.1759-1766
    • /
    • 2001
  • Vibration transient generated by developing localized fault in gear can be used as indicators in gear fault detection. In this paper, we propose the zoomed phase map for a fault signal using continuous wavelet transfers to detect this vibration transient. Local fault induces the abrupt fluctuation of load exciting tooth and phase lag in the vibration signal measured on the gearbox. The relatively large fault like "tip breakage" easily can be detected by the clear fluctuation of exciting load. However, minor fault like "initial pitting"cannot be detected using the load fluctuation. To defect this kind of minor fault, the phase map for a fault signal is taken into account. The phase lag by minor fault is observed well in the zoomed phase map.

A Novel Thermal Shut Down circuit (새로운 고온 보호회로)

  • Park Young-Bae;Koo Gwan-Bon
    • Proceedings of the KIPE Conference
    • /
    • 2006.06a
    • /
    • pp.254-256
    • /
    • 2006
  • A Novel way to support typical Thermal Shut Down(TSD) circuit is proposed. In power ICs, on-time or on-duration is the key factor to anticipate an abrupt increase of internal temperature. Such an abrupt raise of the temperature can cause TSD circuit cannot protect on proper time due to the temperature detection delay come from the physical distance or the imperfect coupling between heat sources and detector. The proposed circuit checks the duty ratio touched their maximum or not in every cycle. Once duty ratio touches the maximum duty, new circuit generates the warning signal to the TSD circuit and lowers pre-determined temperature for shut down to compensate the detection delay. The novel circuit will be analyzed to the transistor level and checked the validity by simulation.

  • PDF

Detection and Synthesis of Transition Parts of The Speech Signal

  • Kim, Moo-Young
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.3C
    • /
    • pp.234-239
    • /
    • 2008
  • For the efficient coding and transmission, the speech signal can be classified into three distinctive classes: voiced, unvoiced, and transition classes. At low bit rate coding below 4 kbit/s, conventional sinusoidal transform coders synthesize speech of high quality for the purely voiced and unvoiced classes, whereas not for the transition class. The transition class including plosive sound and abrupt voiced-onset has the lack of periodicity, thus it is often classified and synthesized as the unvoiced class. In this paper, the efficient algorithm for the transition class detection is proposed, which demonstrates superior detection performance not only for clean speech but for noisy speech. For the detected transition frame, phase information is transmitted instead of magnitude information for speech synthesis. From the listening test, it was shown that the proposed algorithm produces better speech quality than the conventional one.

An Efficient Scene Change Detection Algorithm Considering Brightness Variation (밝기 변화를 고려한 효율적인 장면전환 검출 알고리즘)

  • Kim Sang-Hyun
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.6 no.2
    • /
    • pp.74-81
    • /
    • 2005
  • As the multimedia data increases, various scene change detection algorithms for video indexing and sequence matching have been proposed to efficiently manage and utilize digital media. In this paper, we propose a robust scene change detection algorithm for video sequences with abrupt luminance variations. To improve the accuracy and to reduce the computational complexity of video indexing with abrupt luminance variations, the proposed algorithm utilizes edge features as well as color features, which yields a remarkably better performance than conventional algorithms. In the proposed algorithm first we extract the candidate shot boundaries using color histograms and then determine using edge matching and luminance compensation if they are shot boundaries or luminance changes. If the scene contains trivial brightness variations, the edge matching and luminance compensation are performed only for shot boundaries. In experimental results, the proposed method gives remarkably a high performance and efficiency than the conventional methods with the similar computational complexity.

  • PDF

Combining approach in Fault Detection and Isolation for GPS applications

  • Chey, Jay-Won;Jee, Gyu-In;Lee, Jang-Gyu
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2004.08a
    • /
    • pp.1949-1952
    • /
    • 2004
  • GPS is widely used for outdoor positioning in many applications. But it is not suitable for positioning in an obstacle environment such as urban area, tunnels and so on, due to variable signal level. So new technology of the positioning is required to provide the consistent error level regardless of any changes in any environment. Abrupt changes of GPS signal can be detected by various fault detection and isolation methods. Conventional FDI (Fault Detection and Isolation) methods are categorized into two approaches. One approach is the snapshot method that uses measurements only at present step. The other approach is the filtering method that uses measurements stacked from previous step to present step. The FDI result of the snapshot method can be considered reliable independently with previous results and the FDI result of the filtering method is more reliable and detection time is a little longer. Therefore combining approach of two methods is proposed for increasing FDI performance in this paper. Three approaches that are the snapshot method, the filtering method and the combining method are compared to show the probability of correct FDI in simulations. The combining approach presents best result of FDI among them and shows the consistent accuracy irrespective of any changes in outdoor environment.

  • PDF

Online abnormal events detection with online support vector machine (온라인 서포트벡터기계를 이용한 온라인 비정상 사건 탐지)

  • Park, Hye-Jung
    • Journal of the Korean Data and Information Science Society
    • /
    • v.22 no.2
    • /
    • pp.197-206
    • /
    • 2011
  • The ability to detect online abnormal events in signals is essential in many real-world signal processing applications. In order to detect abnormal events, previously known algorithms require an explicit signal statistical model, and interpret abnormal events as statistical model abrupt changes. In general, maximum likelihood and Bayesian estimation theory to estimate well as detection methods have been used. However, the above-mentioned methods for robust and tractable model, it is not easy to estimate. More freedom to estimate how the model is needed. In this paper, we investigate a machine learning, descriptor-based approach that does not require a explicit descriptors statistical model, based on support vector machines are known to be robust statistical models and a sequential optimal algorithm online support vector machine is introduced.