• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.496-503
• /
• 2003

An experimental study has been performed on thermal transport from an aluminum foam heat sink under a confined impinging air jet. Three kinds of aluminum foam heat sinks with 10, 20 and 40 PPI and a conventional pin-fin heat sink are tested in the present study. The jet Reynolds number is varied in the range of Re=667～5672 The effect of the confinement disk diameter and the distance between the confinement disk and the heater surface on the averaged Nusselt number is investigated in detail. The results are also compared with those of the unconfined impinging air jet. The critical distance, at which thermal performance shows a minimum compared to the unconfined jet impinging, will be described in terms of the Reynolds number and the pore density of the aluminum foam.

• 제어로봇시스템학회논문지
• /
• 제4권5호
• /
• pp.608-615
• /
• 1998

In this paper a second-order iterative learning control algorithm with feedback is proposed for the trajectory-tracking control of nonlinear dynamic systems with unidentified parameters. In contrast to other known methods, the proposed teaming control scheme utilize more than one past error history contained in the trajectories generated at prior iterations, and a feedback term is added in the learning control scheme for the enhancement of convergence speed and robustness to disturbances or system parameter variations. The convergence proof of the proposed algorithm is given in detail, and the sufficient condition for the convergence of the algorithm is provided. We also discuss the convergence performance of the algorithm when the initial condition at the beginning of each iteration differs from the previous value of the initial condition. The effectiveness of the proposed algorithm is shown by computer simulation result. It is shown that, by adding a feedback term in teaming control algorithm, convergence speed, robustness to disturbances and robustness to unmatched initial conditions can be improved.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.243-251
• /
• 2004

Absorption chiller/heater can utilize the unused energy of the daily life waste heat, the industry waste heat. the solar energy and the earth energy. These can contribute to energy savings. But the absorption chiller/heater has a demerit that the size of absorption chiller/heater is larger than that of the vapor compression type based on same capacity. In this study. the experimental apparatus of an absorber is manufactured as a plate. which is newly applied in an absorber. The experimental apparatus is composed of a plate type absorber. which can increase the heat exchange area per unit volume and thus facilitating to deeply investigate more detail features instead of that done by the existing type. i.e.. horizontal tube bundle type. The characteristics of heat transfer and refrigeration capacity are studied experimentally. The absorption enhancement by using surfactant is closely examined through the experiment and comparative figures are presented in quantitative and qualitative analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.346-346
• /
• 2000

We proposed a method of second-order iterative learning control with feedback, which shows an enhancement of convergence speed and robustness to the disturbances in our previous study. In this paper, we show that the proposed second-order iterative learning control algorithm with feedback is more effective and has better convergence performance than the algorithm without feedback in the case of the existence of initial condition errors. And the convergence woof of the proposed algorithm in the case of the existence of initial condition error is given in detail, and the effectiveness of the Proposed algorithm is shown by simulation results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.260-265
• /
• 1994

Efforts have been devoted to developing rapid and accurate methods for measuring the errors of machine tools. The method os measurement and calibration of machine tool errors should be general and efficient. The objective of this study is to show in detail the full sequence from the measurement of errors factors to the verification of the positioning accuracy after compensation for the volumetric error. In this paper, we described the steps in measuring the volumetric error parameters, a general error model composed of error parameters, temperature, and the desired position. The validity of the error calibration methods proposed in this paper was tested using a vertical 3-axis CNC machine with a laser interferometer and a ball bar.

• 품질경영학회지
• /
• 제28권2호
• /
• pp.192-210
• /
• 2000

Chemical industry has contributed significantly to the enhancement of quality of human life, but it has been regarded as a major area of environmental problem due to the potential hazards in environment and safety. This paper examines environmental management programs of chemical industry such as RC(Responsible Care) and PRTR(Pollutant Release and Transfer Register). Through the survey of Dow Chernical's environmental management system, it is examined in detail how a leading company in chemical industry has coped with environmental problem companywide.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.63-63
• /
• 2011

In this tutorial session, the field of organic photovoltaic (OPV) cells based on small molecular weight materials will be presented. The previously reported studies on the fabrication, structure, and property of the cells as well as the molecular materials are included. Especially, the factors hampering further enhancement in the power conversion efficiency of the cells such as exciton recombination, light absorption and interfacial morphology between electron donor and acceptor layer will be discussed in detail. The recent progress in our group will also be presented. It includes typical materials and cell fabrication techniques we used as well as the studies on improving the light absorption in the electron donor layer and reducing the extinction of excitons formed by introducing the nanostructured interface between organic layers.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1893-1896
• /
• 2002

Remediation Selection Expert System (RSES) is a rule-based expert system which is used far the selection of remediation techniques fur petroleum contaminated sites. In this paper, we describe a fuzzy logic-based sub-system: Site Characterization Sub-System (SCSS). It is an enhancement of the RSES, which is used to analyze the hydraulic properties of contaminated sites. This paper focuses on an explanation on how to apply fuzzy set theory for identification of soil types and hydraulic properties of a contaminated site. To illustrate application of fuzzy set theory to the problem, two sample cases are presented in detail.

• 전자공학회논문지B
• /
• 제30B권7호
• /
• pp.1-13
• /
• 1993

In this paper, the problems of the conventional special-purpose array processor such as the deficiency of flexibility have been investigated. Then, a new modified methodology has been suggested and applied to obtain the common solution of the three typical App algorithms like SP(Shortest Path), TC(Transitive Closure), and MST(Minimun Spanning Tree) among the various APP algorithms using the similar method to obtain the solution. In the newly proposed APP parallel algorithm, real-time Processing is possible, without the structure enhancement and the functional restriction. In addition, we design 2-demensional bit-parallel low-triangular systolic array processor and the 1-PE in detail. For its evaluation, we consider its computational complexity according to bit-processing method and describe relationship of total chip size and execution time. Therefore, the proposed processor obtains, on which a large data inputs in real-time, 3n-4 execution time which is optimal o(n) time complexity, o(n$^{2}$) space complexity which is the number of total gate and pipeline period rate is one.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권1호
• /
• pp.36-41
• /
• 2015

This paper is proposed a wavelet-based MCDT(Mask Coefficient Differential and Threshold) method of image registration of Multi-images contaminated with visible image and infrared image. The method for ensure reliability of the image registration is to the increase statistical corelation as getting the common feature points between two images. The method of threshold the wavelet coefficients using derivatives of the wavelet coefficients of the detail subbands was proposed to effectively registration images with distortion. And it can define that the edge map. Particularly, in order to increase statistical corelation the method of the normalized mutual information. as similarity measure common feature between two images was selected. The proposed method is totally verified by comparing with the several other multi-image and the proposed image registration.