• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.601-605
• /
• 2009

The paper deals with the proper design of GGH(gas-gas heater) panel elements of desulfurization equipments in a thermoelectric power plant. When fossil fuels such as coal, petroleum et cetera are burnt to ashes, sulfur oxide compounds are produced, and calcareous sludges are deposited at GGH panel elements. In this case, operation of a power plant equipments is interrupted, and a tremendous economic loss comes into existence. One of the purposes of the paper is to find flow velocity distributions and regions of depositions when calcareous sludges pile up on the GGH panel elements through the fluid analysis. In the fluid analysis, flow velocity and position distributions of particles between GGH panel elements are demonstrated according to time variation for ammonia and calcium hydroxide particles.

• YAKHAK HOEJI
• /
• v.36 no.1
• /
• pp.12-16
• /
• 1992

A new method for the synthesis of alminoprofen, which is a non-steroidal antiinflammatory agent, was described. Ethyl 2-phenyl-propionate(4) was prepared by Friedel-Crafts reaction of benzene with ethyl ${\alpha}-chloro-{\alpha}(methylthio)acetate(1)$, followed by methylation and desulfurization of the resultant ethyl 2-(methylthio)phenylacetate(2). Ethyl 2-(p-aminophenyl)propionate(6) was obtained by nitration of (4) and successive reduction of ethyl 2-(p-nitrophenyl)propionate(5). Alminoprofen was synthesized by reaction of (6) with methallyl chloride, followed by hydrolysis of the resultant ethyl 2-(p-methylallylaminophenyl)propionate (7).

• YAKHAK HOEJI
• /
• v.40 no.6
• /
• pp.640-645
• /
• 1996

5-Alkyl-2(3H)-benzofuranones(3a-e) were prepared from Friedel-Crafts reaction of 4-alkylphenols with methyl 2-chloro-2-(methylthio)acetae(1) followed by the treatment of zinc du st-acetic acid. The reaction of disubstituted phenols with 1 in the presence of stannic chloride afforded 3-methyltWa-2(3H)-benzofuranone derivatives(11a-c), which were readily converted into 2(3H)-benzofuranone derivatives(12a-c) by desulfurization with zinc dust-acetic acid.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.860-864
• /
• 2001

Today's industrialized plants are required to reduce SOx emitted from stacks at factories, utility power stations, etc. For this purpose, flue gas desulfurization (FGD) system is installed and gas-gas heater (GGH) is used to play a vital role to reheat the wet treated gas from FGD. The sector plates are located at cold and hot sides of gas gas heater. They serve as sealing to prevent mixing treated and untreated gases. Therefore, the deformation of the sector plate due to its dead weight and gas pressure should be considered as major factor for the sector plate design.

• YAKHAK HOEJI
• /
• v.36 no.2
• /
• pp.126-128
• /
• 1992

A new method for felbinac, which is a potent anti-inflammatory agent, is described. Friedel-Crafts reaction of biphenyl with ethyl ${\alpha}-chloro-{\alpha}-(methylthio)acetate(1)$ afforded ethyl 2-methylthio-2-(4-biphenylyl)acetate(4). Felbinac (7) was synthesized by desulfurization of compound (4) with zinc dust in acetic acid, followed by hydrolysis of the resultant ethyl 2-(4-biphenylyl)acetate (6).

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.4
• /
• pp.262-268
• /
• 1992

The trend of international concerns on environmental conservation and domestic demand of ambient air quality improvement, specially on sulfur dioxide level has resulted in the establishment of mid-term strategy of environmental improvement and stepwise strengthening of emission regulations in this decade in Korea. Development of flue gas desulfurization(FGD) process is becoming an essential task to be accomplished especially for the power plants and large industrial facilities. This study is an initial stage researc focusing on the mass transfer principles in wet type FGD process and the effects of operating variables of a jet bubbling scrubber utilizing limestone slurry on sulfur dioxide removal efficiency. Experimental results showed this type of scrubbing system has some advantages in terms of mass transfer mechanism and removal efficiency. More rigorous research is needed for the reaction system and the comparison with existing FGD processess for the possible development of a process which is compatative in view of installation cost and treatment of by-products.

• YAKHAK HOEJI
• /
• v.33 no.4
• /
• pp.237-240
• /
• 1989

A new synthetic method for tiaprofenic acid, which is a potent anti-inflammatory agent, was described. Friedel-Crafts reaction of thiophene with ethyl ${\alpha}-chloro-{\alpha}-(methylthio)$ acetate (1) gave ethyl ${\alpha}-methylthio-2-thiopheneacetate$ (3). Ethyl ${\alpha}-methyl-2-thiopheneacetate$ (5) was prepared by treatment of (3) with NaH and MeI, followed by desulfurization with zinc dust-acetic acid of the resultant ethyl ${\alpha}-methyl-{\alpha}-methylthio-2-thiopheneacetate$ (4). Tiaprofenic acid (7) could be easily synthesized by benzoylation of (5) and hydrolysis of the resultant ethyl $5-benzoyl-{\alpha}-methyl-2-thiopheneacetate$ (6).

• Archives of Pharmacal Research
• /
• v.23 no.5
• /
• pp.438-440
• /
• 2000

The total synthesis of a demethoxy-egonol isolated from Styrax obassia, 5-(3-hydroxypropyl)-2-(3',4'-methylenedioxyphenyl)benzofuran (9), is described. The key steps involve the construction of a 2-arylbenzofuran skeleton 7 from methyl 3-(4-hydroxyphenyl)propionate with 2-chloro-2-methylthio-(3',4'-methylenedioxy) acetophenone (6) in the presence of ZnCl$_2$ and successive desulfurization of the resulting product 7.

• Computers and Concrete
• /
• v.16 no.3
• /
• pp.487-502
• /
• 2015

This study investigated particle expansion in basic oxygen furnace slag (BOF) and desulfurization slag (DSS) after heat curing by using the volume method. Concrete hydration was accelerated by heat curing. The compressive strength, ultrasonic pulse velocity, and resistivity of the concrete were analyzed. Maximum expansion occurred in the BOF and DSS samples containing 0.30-0.60 mm and 0.60-1.18 mm particles, respectively. Deterioration was more severe in the BOF samples. In the slag aggregates for the complete replacement of fine aggregate, severe fractures occurred in both the BOF and DSS samples. Scanning electron microscopy revealed excess CH after curing, which caused peripheral hydration products to become extruded, resulting in fracture.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.2
• /
• pp.120-130
• /
• 2000

A flow uniformity in a duct cooler of duct system of FGD(Flue Gas Desulfurization) linking a reheater and a absorber has been investigated in the present study. For this purpose, the flow characteristics according to the geometry of a vertical and horizontal vane in a curved duct of the duct system has been examined with the aid of a numerical simulation. The results indicate that the vertical vane with a little deflection toward a recirculation region makes the flow distribution in the duct cooler more uniform than that without deflection, and horizontal vane does not effect the change of the flow distribution for an angle of inclination. The mean flow uniform factor shows its maximum for duct system without the vane(case NP) and its minimum for the vertical vane with a little deflection(case P-0.8-0) .