• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.268-277
• /
• 1998

The numerical procedure for calculating non-uniform residual stress fields by using relieved strain data from incremental hole drilling method is presented. Finite element calculations are described to evaluate the relieved coefficients required for the determination of residual stresses. From the results of simulations it is found that this numerical method is well adopted to measuring non-uniform residual stress in the hole depth range of 0.8 times of the hole diameter from the surface. In order to examine the practicability of this method, the hole drilling procedure for the four point bending test is performed. This method is applied to the measurement of residual stresses in the cold-rolled steel pipe. It is shown that the magnitude of residual stress in the pipe is not negligible when compared with yield stress and the residual stress should be duly considered in designing structures with this pipes.

• Journal of Fashion Business
• /
• v.8 no.1
• /
• pp.107-116
• /
• 2004

In the modern society, magazine is a information communicating media which is an important element in assessing the whole of a nation's cultural standard. More subdivided fields of magazines are expanding according to the diversified concepts. As the variety of Korean edition of foreign magazines are increasing, the type of Women's magazines are also diversifying and expanding. By finding out the problems and analyzing the visual side of domestic women's magazines among the intense competition of the magazines, the design improvement program was requested. The analysis result from the visual side of domestic women's magazines tells us that the problem of current domestic women's magazines is that their identities are not clear. The cause can be divided into three reasons: First, it is the lack of creativity and originality. There is a limitation in arousing the readers' interests by designing the magazines with similar layouts. Second, there are no distinct design concepts in the magazines. It seems as if the uniformity is lacked as the impression the magazine gives is not clear. The diversification of layouts and the use of design elements could actually bring about a counter result. Third, the excessive advertisement pages is another reason. The ads that covers over 35% of the whole of the magazine can act as a factor that drops the readers' trust in the magazine.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.70-78
• /
• 2016

This paper aims to describe a case study of parametric interior design based on BIM (Building Information Modeling). As the practical use of BIM-based design grows, its influence expands into the field of interior architecture design. BIM makes possible to check various design plan, reach decision making in an effective way, and change design plan in an efficient method. Therefore, BIM is also promising field in interior architecture design. However, compared to other fields in architecture, engineering, and construction (AEC) industry, there have been less research and projects on BIM in the field of interior architecture. For increasing the feasibility of adapting BIM in interior architecture design, this paper describes a case study-projecting images for designing interior panels using parametric modeling. This process needs elaborate, delicate, and precise steps for harmonious output. For continuous use of building, users look forward to the design which variable and changeable according to user's preference and environment. Therefore, demand for parametric design in the interior design part such as panel pattern design for various decoration is growing. Treated process in this paper deals with an advanced phase which much effective in decreasing time consumption and useless part of process. Finally, this paper suggests the possibility of using BIM in the interior design process and field where BIM can be applied.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.4
• /
• pp.103-118
• /
• 2008

University campuses, in Korea, experienced expansion during the 1970's and exceeded its capacity in the 1980's. On the other hand, universities needed to deal with increasing capacity and expansion of its facilities. This study is carried out in three steps : developing the factors of environmental friendly assessment, designing an assessment table based on specific categories, and applying the categories to the campus of Seoul National University. The assessment factors and assessment table were designed through a survey of experts in landscaping, architecture, and urban planning. The elements of major categories were classified as follows; 1) Management of land and accessibility, 2) Pollution and waste matter, 3) Energy, 4) Natural resources, 5) Operation, maintenance and management of environmental friendly campus. And, this study classified five major categories into twenty subcategories on the evaluation of the environmental friendly campus. The twenty subcategories include various fields such as architecture, landscape architecture, environment, urban design, and social sciences etc., profound studies at this line should make more precise assesment guidelines.

• Journal of the Korean Society of Systems Engineering
• /
• v.8 no.2
• /
• pp.1-10
• /
• 2012

This paper aims to analyze the result of SE Process Implementation on Light Rail Transit(LRT) Project. Currently the Light Rail Transit Project of Korea applies SE to the intermediate phase, that is, E&M phase which is a manufacturing and designing procedure. More seriously, the application effect of SE is not remarkable because it applies to some specific engineering fields like RAMS and it depends on superficial consulting of foreign companies with low SE support capability and investment capital. This study points out that the "Requirement Analysis" and "System Alternative Review" has not been conducted from the initial phase (basic plan and basic design) of the LRT projects. Several projects indicate that the amount of investments for SE activities through the Korea LRT project is relatively very small in comparison with the global capital which is about 10% of total project budget. Furthermore, Korea LRT projects have very few SE professionals and weak SE organization with no government directions and guide book for the efficient implementation of SE for the LRT projects.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.2
• /
• pp.54-58
• /
• 2004

This paper presents the iron core design method of a high temperature superconducting (HTS) transformer considering voltages per turn (V/T). In this research, solenoid type HTS coils were selected for low voltage (LV) winding and double pancake coils for high voltage (HV) winding, just as in conventional large power transformers. V/T is one of the most fundamental elements used in designing transformers, as it decides the core cross sectional area and the number of primary and secondary winding turns. By controlling the V/T, the core dimension and core loss can be changed diversely. The leakage flux is another serious consideration in core design. The magnetic field perpendicular to the HTS wire causes its critical current to fall rapidly as the magnitude of the field increases slowly. Therefore in the design of iron core as well as superconducting windings, contemplation of leakage flux should be preceded. In this paper, the relationship between the V/T and core loss was observed and also, through computational calculations, the leakage magnetic fields perpendicular to the windings were found and their critical current decrement effects were considered in relation to the core design. The ％ impedance was calculated by way of the numerical method. Finally, various models were suggested.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.96-102
• /
• 2008

For centuries now, wind tunnels have been a key element in scientific research in a number of fields. Experimenting with racecars, airplanes, weather patterns, birds, and various other areas has been made much easier because of its development. In the racing field, for example, the information gathered from this testing can mean the difference between winning and losing a race. Weather simulations can also provide valuable information regarding building stability and safety. This has become very important when designing buildings today. Valuable information concerning bird flight has also been collected based on wind tunnel testing. Wind tunnels have a variety of important uses in the world today. Wind tunnel that used here is an open loop low speed wind tunnel. The fundamental principles of this tunnel is moving the air using exhaust fan In the rear side, and placing the cube in the external balance system which used to measure the working force. This experiment is using 50mm cube of finished wood. From this experiment we can get Drag Force (FD), The Reynolds Number (Re) and The Coefficient of Brae (CD).

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.888-891
• /
• 2011

This paper presents development of flow control valve using MR fluid. Generally, since the apparent viscosity of MR fluids is adjusted by applying magnetic fields, the MR valves can control high level fluid power without any mechanical moving parts. In this paper, flow control valve using MR fluid on the behavior of the magnetic field influence on the numerical analysis of more accurate electromagnetic parameters were obtained, even if when magnetic field apply inside of surrounding MR fluid from electromagnet, more realistic designing way analysis of characteristic of whole magnetic field distribution is suggested by surrounding magnetic material. Also, comparison of flow rate inlet and outlet, behavior of MR fluid in experiments proposed. A new type of flow control valve using MR fluid is proposed by analysis of behavior of MR fluid in experiments.

• Journal of architectural history
• /
• v.9 no.2 s.23
• /
• pp.49-63
• /
• 2000

In this research, we analyzed the activities of Japanese architectural offices in Korea during the Japanese occupation era, classifying them into two groups: first, Japanese architectural offices that had their bases in Korea, and second, Japanese architectural offices that had their bases in Japan. There were totally 98 Japanese architectural offices that had their bases in Korea during the Japanese occupation period. The number of those offices had increased rapidly since 1920s. Nakamura(the design of bank buildings), Tamada(the design of theaters), Otsumi(the design of Japanese style residential houses) can be regarded as the most remarkable Japanese architectural offices among them. We found that these offices already specialized in certain architectural planning fields, such as bank buildings, theaters and residential houses. It was also found that, during the Pacific War period, even privately-managed architectural offices were mobilized for the war by Japanese government, through designing munitions factories, etc. On the one hand, since some large Japanese corporations entered into Korea, many Japanese architectural offices, that had their bases in Japan, got into working in Korea and designed a number of buildings, with the exception of the architectural office of Vories, who was a Christian architect. Even though the place that the activities of these Japanese architectural offices were carried out was Korea, any factors of Korean architectural style couldn't be found In their works. This means that they just transplanted the Japanese modern architectural style in Korea.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.280-284
• /
• 2020

In the rapidly changing science and technology environment, an in-depth understanding of users of STEM information is an essential factor in designing a user-centered information system. The purpose of this study is to investigate and analyze in-depth the behaviors and needs of users who use STEM information. In this study, the needs of users for STEM information and STEM information sites are dealt with in depth using the FGI qualitative method. In addition, it includes the analysis results of grouping of similar sites according to various aspects of use of STEM information sites. As a result of grouping similar sites based on awareness and level of use,, they were grouped by domestic-international, paid-free, integrated-specific fields. As a result of grouping similar sites according to the purpose of use, they were grouped by domestic and international papers, research reports, and patents. As a result of grouping similar sites according to usage attributes, they were grouped by diversity, reliability, and specialization. As for the positions of similar sites perceived by users, Science Direct and PubMed showed high specialization and high quality, Google Scholar showed integration and popularity, and RISS showed four attributes evenly. Suggestions for information system design are discussed.