• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.4
• /
• pp.293-298
• /
• 2017

In this study, we developed a 3D chocolate printer and studied the conditions needed for chocolate printing. Because chocolate is a mixture of cocoa mass, cocoa butter and sugar particles, its properties vary with temperature, and care is required in melting and extrusion. A chocolate supply unit is composed of a heating block and a syringe pump. It is integrated with a 3-axis linear robot. In order to be more accurate than the existing 3D chocolate printer is, the system was configured so that the printing line width became $430{\mu}m$. Printing performance was studied according to various parameters. The condition needed for printing lines with a stable width was discovered by the experimental design method and has been confirmed by a 2D line test. These 3D printing experiments showed that it was possible to build a 3D shape with an inclination angle of up to $45^{\circ}$ without support. Further, chocolate printing of a 3D shape has been successfully verified with the developed system.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.213-214
• /
• 2008

Since standardization project is composed of complicate system, such as vehicle, signal, electric power and railway, how to build management system of the project has influence on the success of the project for the first stage of the project. The computer system design tool supports to carry out requirement analysis, DB construction, and history and follow-up management efficiently. Therefore, the aim of this study is to investigate the method to optimize schema using computer system design tool.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.85-94
• /
• 1999

Reconfiguration, expansion, or new establishment of FMS requires the availability of a shop floor control (SFC) system relevant to the FMS since it is closely related with the hardware component of FMS. Due to the expensive cost of its development, significant research efforts have been made to develop an SFC system that is reusable. This paper presents Abstract Machine Tool (AMT) approach applied to develop an SFC sytem that is reusable without additional programming. The AMT model enables us to design the SFC system independently of the hardware-dependent attributes of euqipment; an AMT models a workstation by abstraction and presents an equipment-independent interface to machining cell controller. Specifically, we describe how we formalize the interfaces among equipment in order to build an AMT and how we design the machining cell control software based on AMT models. We also present MACHINIST the machining cell control system for IAE-FMS plant as an implementation example.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.219-226
• /
• 2017

This paper addresses the effective and quantitative image DB construction for the development of front looking camera systems. The automotive industry has expanded the capability of front camera solutions that will help ADAS(Advanced Driver Assistance System) applications targeting Euro NCAP function requirements. These safety functions include AEB(Autonomous Emergency Braking), TSR(Traffic Signal Recognition), LDW(Lane Departure Warning) and FCW(Forward Collision Warning). In order to guarantee real road safety performance, the driving image DB logged under various real road conditions should be used to train core object classifiers and verify the function performance of the camera system. However, the driving image DB would entail an invalid and time consuming task without proper guidelines. The standard working procedures and design factors required for each step to build an effective image DB for reliable automotive front looking camera systems are proposed.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.3-9
• /
• 2011

Simulation plays an important role for system analysis. In this study, a manufacturing system has been analyzed through computer simulation. We first briefly explain the considered system with prevailing problems. We then build a simulation model using ARENA simulation language. Based on two selected performance measures, material transporter load and hourly throughput, explicit system analyses have been performed. We addressed four parameters - variation of the processing time, number of raw material transporters, quality failure rate, and machine failures - as the input parameters affecting the output measures selected. We adopted Taguchi's orthogonal array in statistical experimental design and drew meaningful results from the analysis. The results given in the study may provide a good guidance for practical applications.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.1
• /
• pp.79-87
• /
• 2000

This paper presents an integrated but open product development environment for distributed and collaborative design. The web-based framework, called DOME, allows designers to build integrated models using both local and distributed resources, and to collaborate by exchanging services in a network-centric product development environment. Thus, an integrated model can be created while each participant focuses on his or her own area of expertise. A design problem model is created by connecting modules, which represent specific system components, analysis capabilities/software, disciplines, or organizations relevant to the problem. The modules interact with each other using service exchanges based upon the CORBA standard communication protocol. The goal of this framework is tall provide the ability to rapidly construct integrated design problem models to facilitate collaborative design work, improve product quality and reduce development time. Ultimately, it should allow specialized engineering applications and design problem models to operate under a common design environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.663-669
• /
• 2012

To solve the energy problem and finding new growth engines, interest for the smart grid is increasing and related technologies are making great efforts to secure in the world. AMI (Advanced Metering Infrastructure) Among them is the first to be constructed and getting attention as a key component of smart grid. A fusion of various technologies in technology development and demonstration is underway on Jeju Island Smart Grid Demonstration Complex in Korea, and focusing on broadband power line communication technology infrastructure is actively underway in Korea Electric Power Corporation. AMI system using power line communication technology without building a separate communication lines are available for power supply lines, but communication is impossible in occurs because admission to the power company or the ideal infrastructure for communication is not considered. In this paper, we analyze the requirements to build AMI system using Binary CDMA and powerline communications technology, and design the basic communication protocol based on Binary CDMA, implement network management and relay feature. By doing so, ways to apply Ad-hoc Binary CDMA indigenous technology to the AMI system were derived, and could build a system to make use of Wired (PLC) and wireless (Binary CDMA) simultaneously.

• Smart Media Journal
• /
• v.5 no.1
• /
• pp.114-121
• /
• 2016

Currently, different medical institutions have been carrying out the e-healthcare system project. The system includes electronic medical record and prescription delivery system, and, the Medical Treatment law permits electronic signature for medical record management, which reduced the relevant costs and enabled sharing medical record. And medical solution using online certificates is expanding its application. In that light, the role of certificates became more important than ever. However, in contrast to active effort made to manage personal certificates, certificates related to medical solutions and other types of work are not being managed properly. Most work-related certificates are saved in office computers, which makes them vulnerable to various security threats. Although certificate servers can be used as a solution to this problem, hospitals must build the server separately and, therefore, small and medium-size hospitals can be reluctant to bear the burden. This study proposed a way to design and implement an effective and secure certificate management system by save the certificate file as a BLOB, using existing resources without needing to build a separate certificate server, at minimized costs.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.75-81
• /
• 2016

My proposed Co-creation platform software analysis and design method in my paper, presents build technology of co-creation platform using Co-creation concepts refer to all process from products' idea level to products' design, manufacturing and marketing level. And this method can be possible to design and implement to be interlocked with company's cloud service and system through own SNS functions and OPEN API to build co-creation platform. Also owing to apply Wiki technology in the process of idea modification and completion level and provide cooperative work tools of story-board prototyping, it can be participate actively in the design process with customer and stakeholder together and realize functions to apply opinions. Therefore, Co-creation platform software analysis and design by objected-oriented analysis method is presented to show these design process effectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.103-109
• /
• 2017

Metal 3D printing, which is an additive metal manufacturing (AMM) process, enables the development of full-density metallic tools and parts using metal powders that are precisely delivered and controlled for deposition with no powder bed. However, some unknown geometric defects and irregular geometric features on an STL model can possibly result in incorrect metal part fabrication after the build. This study first proposes a methodical approach for verifying the build part, including the missing facet problems in an STL model, by defining some irregular features that possibly exist on the part. Second, 2D tool paths on each build layer were investigated for detecting any singular region inside the layer. The method was implemented for building two sample STL models using a direct energy deposition process, and finally, it was visually simulated for diagnosis.