• 한국해양공학회지
• /
• 제33권6호
• /
• pp.504-509
• /
• 2019

The wave-generation performance of a piston-type wave maker was analyzed using the numerical wave tank technique, and the numerical results were compared with theoretical solutions. A two-dimensional frequency domain analysis was conducted based on the Rankine panel method. Various parameters were used to examine the wave-generation performance, such as the width and gap of the wave board. The effects of the thickness of the wave board and of the gap from the bottom of the tank were evaluated. The difference in the amplitude of the generated wave between the analytical solution and the numerical result was examined, and its causes were addressed due to the gap flow between the bottom of the tank and the wave board. This parametric analysis can be utilized to design an optimum wave make parametric analysis to design an optimum wave maker that can generate waves with amplitudes that can be predicted accurately.

• 한국의상디자인학회지
• /
• 제16권2호
• /
• pp.139-150
• /
• 2014

The purposes of this study are to analyze current situation of fashion market of Vietnam who is mainly influenced by Korean wave, analyze preferred fashion brand product and street fashion style of women in 10~20s interested in fashion so much, and develop the design suitable for Vietnamese consumers' preference so as to seek the methods domestic fashion industry can have competitive edge in emerging economic market. It's significant to suggest the direction of Korean new contents and seek the possibility of advancing new market by getting out of domestic market which is stagnated by preparing the foothold of fiber and fashion industry, beyond the first effects of Korean wave. Through this study, current situation of Korean wave which recently becomes new Korean wave based on the K-pop and futhermore, one of worldwide cultural situation could be recognized. Based on the preference of the Korean wave, current situation of Korean fashion industry spread gradually in Vietnam and design characteristics of fashion style preferred by Vietnamese consumers could be grasped. As the result, the design which can satisfy various needs of Vietnamese female consumers preferring fashion style was developed based on the characteristics by product's styles of Vietnamese fashion market. In addition, it intended to be helpful to plan the design of casual wear which is more professional so that Korean fashion industry can advance Vietnamese market through it.

• 한국항해항만학회지
• /
• 제32권9호
• /
• pp.705-709
• /
• 2008

In the sea various methods have been conducted to capture wave energy which include the use of pendulums, pneumatic devices, etc. Floating devices, such as a cavity resonance device take advantages of both the water motion and the wave induced motions of the floating body itself. The wave energy converter is known commercially as the WAGB(Wave Activated Generator Buoy) and is used in some commercially available buoys to power navigation aids such as lights and horns. This wave energy converter consists of a circular flotation body which contains a vertical water column that has free communication with the sea. A theoretical analysis of this power generated by a pneumatic type wave energy converter is performed and the results obtained from the analysis are used for a real wave energy converter buoy. This paper is shown to have an optimum value for which maximum power is obtained at a given resonant wave period Also, the length of the internal water column corresponds to that of the water mass in the water column. If designed properly, wave energy converter can take advantage not only of the cavity resonance, but also qf the heaving motion of the buoy. Finally, simulation is performed with a LabVIEW program and the simulation results are applied to a wave energy simulator for modifying design data for a wave energy converter.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권3호
• /
• pp.282-291
• /
• 2017

The main aim of this study is to investigate the effect of berm breakwater on wave run-up. A total of 200 numerical analysis tests have been carried out in this paper to investigate the effect of berm width, wave height, and wave period on the wave run-up, using an integrating technique of Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD). Direct application of Navier Stokes equations within the berm width has been used to provide a more reliable approach for studying the wave run-up over berm breakwaters. A well tested Reynolds-averaged Navier-Stokes (RANS) code with the Volume of Fluid (VOF) scheme was adopted for numerical computations. The computational results were compared with theoretical data to validate the model outputs. Numerical results showed that the simulation method can provide accurate estimations for wave run-up over berm breakwaters. It was found that the wave run-up may be decreased by increasing the berm width up to about 36 percent. Furthermore, the wave run-up may increase by increasing the wave height and wave period up to about 53 and 36 percent, respectively. These results may convince the engineers to use this model for design of berm breakwater in actual scale by calculating the Reynolds numbers.

• 대한토목학회논문집
• /
• 제7권3호
• /
• pp.155-164
• /
• 1987

구조물(構造物)의 안정성(安定性)과 파랑제어기능(波浪制御機能)을 고려(考慮)한 새로운 사석구조물(捨石構造物) 설계법(設計法)을 제안(提案)하였다. 이 설계법(設計法)은 임의의 파랑조건하(波浪條件下)에서 파랑(波浪)의 반사(反射) 및 run-up을 저감(低減)시키고, 안정성(安定性)을 증대(增大)시키는 설계개념(設計槪念)을 가졌다. 설계식(設計式)은 허용파괴율(許容破壞率)과 안정성(安定性)에 대한 파군특성(波群特性)의 영향(影響) 도입(導入)하여 유도하였으며, 이에는 해안파(海岸波)의 평균(平均) run-sum이라는 새로운 외력개념(外力槪念)이 사용(使用)되었다. 마지막으로 이 새로운 설계법(設計法)에 의한 일양단면(一樣斷面)과 복합단면(複合斷面) 사석구조물(捨石構造物) 설계예(設計例)로부터 이 설계법(設計法)의 유용성(有用性)과 이점(利點)을 검증(檢證)하였다.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.484-493
• /
• 2006

Recently, direct load analysis using ship motion program is required to confirm structural safety for the Post-Panamax class large container carrier. However, there is no exact comparative study data for structural response between 20 and 30 wave load. So, in this paper, to compare the hull girder stress response between 20 versus 3D wave load calculation method, direct load analysis and global F.E analysis have been performed for three kinds of large container vessels using each 20 and 30 wave load calculation program. The results of 2D wave load RAO(Response Amplitude Operator) of each dominant load parameter(vertical, torsional and horizontal moment) are generally bigger than that of 30 results, especially in vertical wave bending moment. And the results of structural analysis based on the equivalent design wave method shows that there is a big difference in view of stress, but the stress distribution is very similar for each wave load case.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.289-295
• /
• 1999

A new conceptual wave rolling ball reducer was proposed and investigated. The main components of the reducer were a eccentric input shaft and bearings, followers with balls, a flange, and a outer ring with waved groove. Followers moved along the holes of the flange according to the rotation of the shaft. And the balls installed in tips of followers were rolled with the waved groove of outer ring. When the shaft was rotated as one revolution and the outer ring was fixed, the flange was rotated as one wave. The kinematic analysis of the reducer carried out. The forces of each components were estimated, and the main design parameters were investigated. The design program using Visual C++ and Auto Lisp to determine the design parameters and to generate the drawing sheet.

• 한국해안·해양공학회논문집
• /
• 제35권4호
• /
• pp.84-94
• /
• 2023

재현기간에 따른 설계주기 추정에는 일반적으로 파고-주기 관계곡선을 이용한다. 본 연구에서는 설계주기 추정을 위한 파고-주기 관계곡선의 매개변수를 선형, 로버스트 선형, 비선형 함수를 이용하여 추정하고 그 계수를 비교-평가하였다. 매개변수 추정에 사용한 자료는 해양수산부(2019) 설계파고 추정에 사용한 연 최대 파고-주기 자료이며, 태풍, 비태풍 조건으로 구분하여 매개변수 추정에 이용하였다. 추정 매개변수는 해역의 지점에 따라 뚜렷한 차이를 보였으며, 추정기법의 경우에는 태풍 조건의 자료의 경우 비선형과 선형 기법이 큰 차이를 보이고 있는 것으로 파악되었다. 또한 SPM 공식과 GODA 공식을 평균하여 추정하는 Suh et al.(2008, 2010) 제안 방법은 절편 매개변수는 과소추정, 경사 매개변수는 과대 추정하는 것으로 파악되었으며, 해역의 국지적인 특성 반영에는 한계가 있는 것으로 판단된다.

• 대한토목학회논문집
• /
• 제41권6호
• /
• pp.687-695
• /
• 2021

최근 국내에서 큰 규모의 지진이 발생하게 되면서 내진설계의 중요성이 크게 증가하였다. 내진설계기준에서는 중요구조물 또는 특수구조물에 대해서는 동적시간이력해석을 수행하도록 규정하고 있다. 이러한 중요 또는 특수 구조물의 내진해석 및 설계에 있어 합리적 설계 입력 지진파를 결정하는 것은 해석 및 설계의 신뢰도를 확보하는데 매우 중요한 요소이다. 내진설계기준에서 합리적 설계 지진파는 해당 지역(단층)의 특성을 반영하면서 동시에 내진 성능 수준별 설계응답스펙트럼을 만족해야 한다. 이러한 요구조건은 해당 지역(단층)에서 계측됐던 실 지진파를 설계응답스펙트럼에 상응하게 수정하여 부분적으로 만족시킬 수 있다. 본 연구에서는 하모닉웨이브릿변환(Harmonic Wavelet Transform)을 이용하여 실 계측 지진파를 기반으로 설계응답스펙트럼에 상응하게 지진파시간이력 수정·생성 하는 방법을 제안하였다. 제안한 기법의 적용성 검토를 위해 경주(2016년)와 포항(2017년)에서 발생했던 각 규모 5.8과 5.4의 지진에 제안된 기법을 적용하여 설계응답스펙트럼에 상응한 지진파시간이력을 수정·생성 하였다

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1994년도 춘계학술발표회
• /
• pp.43-48
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite which has very wide band frequency characteristics is proposed and discussed. The wide band electromagnetic wave absorber can be designed by the proposed equivalent material constants method for the regions varying spatially in the shape of ferrite. Furthemore the wide band ferrite electromagnetic wave absorbers with taper which have not only excellent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity were designed.