• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1994.10a
• /
• pp.59-68
• /
• 1994

A wide band design method of an double layerred electromagnetic wave absorber sintered ferrite which has a flat and an anti-grid shape layers is proposed and discussed. The wide band electomagnetic wave absorber can be designed by the equivalent material constants method for the each layer, As a result the wide band ferrite electonmagnetic wave absorber with the band width of 30MHz to 3670, 3680 or 3690MHz were designed under the tolerance limits of -20dB reflectivity.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1995.10a
• /
• pp.120-121
• /
• 1995

In the design of mixed type breakwater, the most important factor to be considered is the wave pressure. In particular, the standing wave pressure has a significant effect on the vertical wall breakwater or mixed type breakwater. Many wave pressure formulas were developed and the Goda's formula［1］ was very frequently used among them by the coastal engineers due to its simplicity and accuracy. (omitted)

• Proceedings of the Korea Fashion and Costume Design Association Conference
• /
• 2005.06a
• /
• pp.137-141
• /
• 2005

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.1
• /
• pp.14-24
• /
• 2015

This study proposed an estimation method of allowable wave height for loading and unloading of the ship and evaluation of effective working days considering moored ship motion that is affected by sip sizes, mooring conditions, wave periods and directions. The method was examined validity by comparison with wave field data at pier $8^{th}$ in Pohang New Harbor. The wave field data obtained with wave height of 0.10~0.75 m and wave period of 7~13 s in ship sizes of 800~35,000 ton when a downtimes have occurred. On the other hand, the results of allowable wave height for loading and unloading of the ship in this method have obtained with wave heights of 0.19~0.50 m and wave periods of 8~12 s for ship sizes of 5,000, 10,000 and 30,000 ton. Thus this method well reproduced the field data respond to various a ship sizes and wave periods. And the results of this in Korea are didn't respond to various the ship sizes and wave periods, and we h method tended to decrease in 16~62 percent when have considered long wave, and it is decreased in 0~46 percent when didn't consider long wave than design standards in case of the ship sizes of 5,000~30,000 ton, wave period of 12 s and wave angle of $75^{\circ}$. The allowable wave heights for loading and unloading of the ship proposed by design standards in Korea have found that overestimated on smaller than 10,000 ton. On the other hand, the rate of effective working days considering ship motion at pier $8^{th}$ in Pohang New Harbor reduced in 6.5 percent when compare with the results without considering ship motion.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.2
• /
• pp.11-16
• /
• 1993

A design method for the electromagnetic wave absorber with the attenuation over 20 dB at a frequency was formulated. In addition to the matching boundary which is determined by the theoretical equation, several limiting conditions due to the fabrication process were examined. Based on the study on the effects of the variance of the thickness and permittivity on the electromagnetic wave absorbing characteristics, a mean to exclude such effects was also included in the proposed design method. The ranges of variables were limited as the frequency of 9.45 GHz and .epsilon.' = 5 ~ 30, when the effect of .epsilon. " was not considered.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.63-69
• /
• 2012

This paper presents the design of a calculable standard dipole antenna with a hybrid balun in the frequency range of 1 GHz to 3 GHz. A new formula of the antenna factor for a dipole antenna with a hybrid balun is derived using the power mismatch-loss concept. The antenna factors derived in this paper are in good agreement with the results calculated from S-parameters. The design results show that the calculable dipole antenna with a hybrid balun can be characterized by power mismatch-loss component factors.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.500-507
• /
• 2016

In order to increase the survivability of combatant ship, measuring and analyzing the infrared radiation is important. Consequently, providing analysis report is also important for the progress of the new combatant ship design. This paper proposes a design and software implementation of filtering for the noise reduction of mid-wave IR camera image. We reduced the total test cost by using the suggested software filtering technique instead of hardware replacement or re-calibration. In addition, we enhanced the accuracy of analysis results by adjusting the parameters of software filtering according to the results of filtered image.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.366-372
• /
• 2007

Self-sensing measurement of piezo inkjet and its application are discussed. The pressure wave inside the inkjet dispenser was measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially available laser vibrometer. Here, two applications using self-sensing signal were discussed: waveform design for high speed jetting and condition monitoring. For waveform design, two pulse waveform was designed based on self-sensing signal such that the pressure wave after droplet formation can be minimized. For condition monitoring, self-sensing signal was shown to be effective in detecting air bubble trapped in inkjet printhead.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.8
• /
• pp.25-31
• /
• 1999

This paper describes design and fabrication of a new bi-directional ultrasonic linear motor working by means of a traveling wave. With the finite element method, we design and verify validity of the new structure, and determine its optimal structure, material, size, and boundary conditions for proper generation of the traveling wave. Based on the results, a prototype of the motor has been fabricated and characterized, which thereby proves practical applicability of the new structure.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.455-458
• /
• 2002

Design methods are presented for an X-band traveling-wave slot array realized on a rectangular waveguide. An array of 21 longitudinal slots is realized on the broad wall of a rectangular waveguide. The squint of the antenna main beam is adjusted using the element spacing and the waveguide broad wall dimension. The excitation of the array is controlled by the slot offset from the waveguide center line Multiple I-plane steps are placed around last slot elements so that the second-order beam due to tile reflected wave Is minimized A waveguide-to-coaxial adapter Is designed for feeding the array antenna from a coaxial system. Results of the design show an outstanding performance of the antenna 17.1 dB gain. 36"beam 1111, and -21 dB maximum sidelobe level.evel.