• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.57-65
• /
• 2009

An efficient and high-fidelity design approach for wing-body shape optimization is presented. Depending on the size of design space and the number of design of variable, aerodynamic shape optimization process is carried out via different optimization strategies at each design stage. In the first stage, global optimization techniques are applied to planform design with a few geometric design variables. In the second stage, local optimization techniques are used for wing surface design with a lot of design variables to maintain a sufficient design space with a high DOF (Degree of Freedom) geometric change. For global optimization, Kriging method in conjunction with Genetic Algorithm (GA) is used. Asearching algorithm of EI (Expected Improvement) points is introduced to enhance the quality of global optimization for the wing-planform design. For local optimization, a discrete adjoint method is adopted. By the successive combination of global and local optimization techniques, drag minimization is performed for a multi-body aircraft configuration while maintaining the baseline lift and the wing weight at the same time. Through the design process, performances of the test models are remarkably improved in comparison with the single stage design approach. The performance of the proposed design framework including wing planform design variables can be efficiently evaluated by the drag decomposition method, which can examine the improvement of various drag components, such as induced drag, wave drag, viscous drag and profile drag.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.647-653
• /
• 2009

Taguchi parameter design is an approach to reducing performance variation of quality characteristic value in products and processes. Taguchi has used SN (Signal to Noise) ratio to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. This paper describes the prediction technique of vehicle performance using parameter analysis to reduce man hour and test development period as well as to achieve stable NVH performance. Design engineer could efficiently decide the design variable using parameter analysis database in early design stage. These improvements can reduce the time needed to develop better vehicles.

• 소성∙가공
• /
• 제20권2호
• /
• pp.124-131
• /
• 2011

A flexible stretch forming process is useful for small quantity batch production because various shape changes of the flexible die can be achieved conveniently. In this study, the design variables, namely, the punch size, curvature radius and elastic pad thickness, were quantitatively evaluated to understand their influence on sheet formability using statistical methods such as the correlation and regression analyses. Forming simulations were designed and conducted by a three-way factorial design to obtain numerical values of a shape error. Linear relationships between the design variables and the shape error resulted from the Pearson correlation analysis. Subsequently, a regression analysis was also conducted between the design variables and the shape error. A regression equation was derived and used in the flexible die design stage to estimate the shape error.

• Earthquakes and Structures
• /
• 제19권2호
• /
• pp.129-144
• /
• 2020

In this study, the idea of damping force linearly proportional to horizontal isolation displacement is implemented into sloped rolling-type bearings in order to meet different seismic performance goals. In addition to experimentally demonstrating its practical feasibility, the previously developed analytical model is further modified to be capable of accurately predicting its hysteretic behavior. The numerical predictions by using the modified analytical model present a good match of the shaking table test results. Afterward, several sloped rolling-type bearings designed with linearly variable damping force are numerically compared with a bearing designed with conventional constant damping force. The initial friction damping force adopted in the former is designed to be smaller than the constant one adopted in the latter. The numerical comparison results indicate that when the horizontal isolation displacement does not exceed the designed turning point (or practically when subjected to minor or frequent earthquakes that seldom have a great displacement demand for seismic isolation), the linearly variable damping force design can exhibit a better acceleration control performance than the constant damping force design. In addition, the former, in general, advantages the re-centering performance over the latter. However, the maximum horizontal displacement response of the linearly variable damping force design, in general, is larger than that of the constant damping force design. It is particularly true when undergoing a horizontal isolation displacement response smaller than the designed turning point and designing a smaller value of initial friction damping force.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.244-250
• /
• 2015

We propose a simulation technique to estimate the reduction effect of the pressure/flow pulsation by analysis of the pulsation variables and notch shape of the valve plate of a swash-plate-type variable piston pump. First, using SimulationX$^{(R)}$, we perform a theoretical kinematic analysis according to the variable swash-plate angle and rotational velocity in order to design a single-piston pump. In designing the notch shape of the valve plate of the swash-plate-type variable piston pump as one of the pulsation variables, we investigate the effect of the pulsation by comparing two notch types (circular type and V type). Then, we extend our analysis to a nine-piston pump model. This paper not only confirms the effect of the pressure/flow pulsation according to pulsation variables but can also be applied to the development of a SimulationX$^{(R)}$-based simulation technique for notch-shape optimization for a swash-plate-type variable piston pump.

• 제어로봇시스템학회논문지
• /
• 제21권4호
• /
• pp.356-360
• /
• 2015

In this paper, we design and implement a mobile robot with variable structure for tip-over prevention. The mobile robot is designed for the purpose of stable drive and work in outdoor terrain. The outdoor terrain is rough and uneven. In this terrain, the tip-over of the mobile robot can occur while driving and working. Therefore, the structure of the mobile robot must be designed in consideration of stable drive and work. The proposed structure is defined as an X-shape for overall balance of the mobile robot. The shape is designed by using a multi-level structure for reducing the size of the robot. To verify the effectiveness of the proposed design, we analyze the tip-over characteristics according to the height of gravitational center and the extension length of the robot. Finally, we develop a prototype of the mobile robot with variable structure, taking the results of the tip-over analysis into consideration.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.62-67
• /
• 2010

Exhausting fossil fuel and increasing concern of air pollution have brought on the change of the focus of developing new vehicles from performance to fuel economy and emission. The gasoline engines adopting the naturally aspirated way use the throttle-body for engine load control. Therefore, its pumping loss increases more than that of the diesel engine, and also mostly operating in a partial load condition has bad influence on fuel economy and emission. In these days, the continuous variable valve timing system and variable induction system are adopted in order to improve fuel consumption and emission. In this study, we optimize the runner length and operate region of variable induction system to simulataneously improve the performance, fuel economy, and emission of gasoline engine with employing GT-Power as a CAE tool for engine analysis and PIAnO as PIDO tool for process integration and design optimization.

• 대한산업공학회지
• /
• 제27권1호
• /
• pp.47-53
• /
• 2001

In this paper, we compare the classification performances of both ensemble and clustering algorithms (Data Bagging, Variable Selection Bagging, Parameter Combining, Clustering) to logistic regression in consideration of various characteristics of input data. Four factors used to simulate the logistic model are (1) correlation among input variables (2) variance of observation (3) training data size and (4) input-output function. In view of the unknown relationship between input and output function, we use a Taguchi design to improve the practicality of our study results by letting it as a noise factor. Experimental study results indicate the following: When the level of the variance is medium, Bagging & Parameter Combining performs worse than Logistic Regression, Variable Selection Bagging and Clustering. However, classification performances of Logistic Regression, Variable Selection Bagging, Bagging and Clustering are not significantly different when the variance of input data is either small or large. When there is strong correlation in input variables, Variable Selection Bagging outperforms both Logistic Regression and Parameter combining. In general, Parameter Combining algorithm appears to be the worst at our disappointment.

• 복식문화연구
• /
• 제25권3호
• /
• pp.315-326
• /
• 2017

The purpose of this study is to investigate the design methods and characteristics of papercraft fashion from 2001 to 2015. The study has been conducted through theoretical research and case study. Overall, types of papercraft expressions are classified into the following four categories: narrative papercraft fashion, organic papercraft fashion, variable papercraft fashion, and recycling papercraft fashion. The characteristics and aspects of each type of papercraft is described below. First, narrative papercraft fashion expresses as factual description of the natural environment. These works convey fantastic image by showing fairy tale animals or plants using paper folding or cutting. Second, organic papercraft fashion creates a futuristic shape by expressing organic parts in nature. Also, it often depicts future-oriented images by repeatedly representing organic shapes using uniform patterns in nature. Third, variable papercraft fashion expresses a variety of changing shapes through a flexible design based on the style of wearing. This variation may be accomplished through changeable dress connected to human gestures. Variable papercraft represents play-fulness, which conveys enjoyment to the wearer and the audience. Fourth, recycling papercraft fashion uses paper materials of the past, and recreates them into artworks through handicraft techniques. Recycling papercraft conveys high value added fashion by dissolving the material into pulp.

• 대한토목학회논문집
• /
• 제5권4호
• /
• pp.9-14
• /
• 1985

본 연구에서는 평면 변형도상태 하에서 정수압을 받는 2차원 탄성 콘크리트 댐의 단면 모양을 최적화함으로써 댐의 질량을 최소화하였다. 최적화 문제의 목적함수로는 댐의 단면적이, 제약조건으로는 주응력 제약조건과 두께 제약조건들이, 설계변수로는 모델 경계의 모양이 채택되었다. 모델 영역의 변화에 따른 설계감도해석을 위해 최적화 문제를 범함수 형태로 변환한 후 연속체 역학의 물질미분 개념과 Adjoint Variable Technique 을 활용하였고, 최적화를 위해서는 Gradient Projection Method 를 사용하였다. 연구 결과 본 연구에 적용된 이론이 효율적이고 실제 탄성구조물 설계에 광범위하게 응용될 수 있음이 밝혀졌다.