• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.677-684
• /
• 2022

This study is a basic study to evaluate the ecological environment of Changwon City. The study site was 6 ecotourism districts in Changwon-si, and the ecotourism index was evaluated through direct visits and interviews with the person in charge through preliminary research and various literature data from June to July 2021. There are six ecotourism indicators: climate crisis, air quality improvement, water conservation, natural coexistence, citizen participation, and tourism resource management. When looking at the scores for the six ecotourism areas in Changwon, it received the highest score in the areas of natural coexistence and air quality improvement. However, the ecoregion received the lowest score in the water resource conservation category, indicating that the water resource conservation as a whole was weak. Next, tourism resource management, climate crisis, and citizen participation are at the same level in all regions. As a result of the evaluation through the low-carbon ecotourism index, the Changwon City low-carbon ecotourism certification system should first be operated as a measure to revitalize the ecotourism region. It is necessary to prepare a low-carbon ecotourism level for Changwon City. Second, it is very important to guide and promote ecotourism areas to revitalize ecotourism areas. Lastly, to operate a sustainable eco-environment area, it is necessary to operate using local governance above all else.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.403-414
• /
• 2022

Many studies have been conducted on asset management of public facilities, as the importance of such management has been increasing. This basic study aims to present strategies for the practical use of public asset management, and seeks to propose efficient management and utilization measures from a cost perspective by comparing and analyzing the importance and impact relationship between cost items for public asset management. In this study, 19 sub-items and the top 4 items were chosen by deriving cost factors based on the previous literature. A survey was conducted, and the results of the survey were analyzed by using the Analytic Hierarchy Process(AHP) and Interpretive Structural Modeling (ISM) methods. The AHP was used to derive the priority between items, and ISM was used to identify major groups and mutual influences. As a result, those items showing both high priority and high importance, such as user cost, dismantling/disposal cost, replacement cost, maintenance/repair cost, etc. are determined as priority items to be considered for public asset management of public facilities. Also, it is necessary to minimize the impact on other items in public asset management by those items which are impacted less by other items but have significant impact on the items such as initial construction costs, conceptual design costs, construction costs, and supervision costs. It is expected that the results and analysis methods presented in this study can be used to provide strategies for asset management of public facilities.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.2
• /
• pp.48-55
• /
• 2022

The color image of the brand comes first and is an important visual element that leads consumers to the consumption of the product. To express more effectively what the brand wants to convey through design, the printing market is striving to print accurate colors that match the intention. In 'offset printing' mainly used in printing, colors are often printed in CMYK (Cyan, Magenta, Yellow, Key) colors. However, it is possible to print more accurate colors by making ink of the desired color instead of dotting CMYK colors. The resulting ink is called 'spot color' ink. Spot color ink is manufactured by repeating the process of mixing the existing inks. In this repetition of trial and error, the manufacturing cost of ink increases, resulting in economic loss, and environmental pollution is caused by wasted inks. In this study, a deep learning algorithm to predict printed spot colors was designed to solve this problem. The algorithm uses a single DNN (Deep Neural Network) model to predict printed spot colors based on the information of the paper and the proportions of inks to mix. More than 8,000 spot color ink data were used for learning, and all color was quantified by dividing the visible light wavelength range into 31 sections and the reflectance for each section. The proposed algorithm predicted more than 80% of spot color inks as very similar colors. The average value of the calculated difference between the actual color and the predicted color through 'Delta E' provided by CIE is 5.29. It is known that when Delta E is less than 10, it is difficult to distinguish the difference in printed color with the naked eye. The algorithm of this study has a more accurate prediction ability than previous studies, and it can be added flexibly even when new inks are added. This can be usefully used in real industrial sites, and it will reduce the attempts of the operator by checking the color of ink in a virtual environment. This will reduce the manufacturing cost of spot color inks and lead to improved working conditions for workers. In addition, it is expected to contribute to solving the environmental pollution problem by reducing unnecessarily wasted ink.

• Journal of Broadcast Engineering
• /
• v.28 no.1
• /
• pp.79-89
• /
• 2023

A multi-view display is regarded as the most practical technology to provide a three-dimensional effect to a viewer because it can provide an appropriate viewpoint according to the observer's position. But, most multi-view displays with flat shapes have a disadvantage in that a viewer watches 3D images only within a limited front viewing angle. In this paper, we proposed a spherical display using a ball lens with spherical symmetry that provides perfect parallax by extending the viewing zone to 360 degrees. In the proposed system, each projection lens is designed to be packaged into a small modular array, and the module array is arranged in a spherical shape around a ball lens to provide vertical and horizontal parallax. Through the applied optical module, the image is formed in the center of the ball lens, and 3D contents are clearly imaged with the size of about 0.65 times the diameter of the ball lens when the viewer watches them within the viewing window. Therefore, the feasibility of a 360-degree full parallax display that overcomes the spherical aberration of a ball lens and provides a wide field of view is confirmed experimentally.

• Journal of Industrial Convergence
• /
• v.20 no.11
• /
• pp.85-93
• /
• 2022

As of the end of 2019, the total population nationwide was 51,849,861, and over the past five years, the population per household has decreased by 1.52% annually from 2.45 in 2015 to 2.31 in 2019. Looking at the current status of population distribution by age group, Busan metropolitan city had the highest proportion of senior citizens aged 65 or older at 18.2%, and Sejong Special Self-Governing city had the lowest at 9.4%. In particular, as of 2019, the population of the mobility handicapped was 15,219,000 nationwide, showing a ratio of about 29.4% of the total population. Therefore, it is important to secure the right to move according to the mobile facilities so that the mobility handicapped can move safely and conveniently. Against this background, this study places value on transportation welfare facilities centered on the mobility handicapped for safe and convenient movement, and in particular, in proposing measures to cope with the entry of an aging society and the continuous increase of the mobility handicapped, the transportation facilities, The purpose of this study is to analyze the impact of welfare facilities on the mobility handicapped and suggest implications. As a research method, the results of statistical analysis methods were presented through major preceding studies and expert surveys.

• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.15-26
• /
• 2022

With the recent increase in old and dangerous buildings, the demand for technology in the field of structure demolition is rapidly increasing. In particular, in the case of structures with severe deformation of damage, there is a risk of deterioration in stability and disaster due to changes in the load distribution characteristics in the structure, so rapid structure demolition technology that can be efficiently dismantled in a short period of time is drawing attention. However, structural deformation such as unauthorized extension or illegal remodeling occurs frequently in many old structures, which is not reflected in structural information such as building drawings, and acts as an obstacle in the demolition design process. In this study, as an effective way to overcome the discrepancy between the structural information of old structures and the actual structure, access to actual structures through 3D modeling was considered. 3D point cloud data inside and outside the building were obtained through LiDAR and drone photography for buildings scheduled to be blasting demolition, and precision matching between the two spatial data groups was performed using an open-source based spatial information construction system. The 3D structure model was completed by importing point cloud data matched with 3D modeling software to create structural drawings for each layer and forming each member along the structure slab, pillar, beam, and ceiling boundary. In addition, the modeling technique proposed in this study was verified by comparing it with the actual measurement value for selected structure member.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.9
• /
• pp.33-40
• /
• 2023

The lateral load which is applied to the pile foundation supporting the superstructure during an earthquake is divided into the inertia force of the upper structure and the kinematic force of the ground. The inertia force and the kinematic force could cause failure to the pile foundation through different complex mechanisms. So it is necessary to predict and evaluate interaction of the ground-pile-structure properly for the seismic design of the foundation. The interaction is affected by the lateral behavior of the structure, the length of the pile, the boundary conditions of the head, and the relative density of the ground. Confining pressure and ground stiffness change accordingly when the relative density changes, and it results that the coefficient of subgrade reaction varies depending on each system. Horizontal bearing behavior and capacity of the pile foundation vary depending on lateral load condition and relative density of the sandy soil. Therefore, the 1g shaking table tests were conducted to confirm the effect of the relative density of the dried sandy soil to dynamic behavior of the group pile supporting the superstructure. The result shows that, as the relative density increases, maximum acceleration of the superstructure and the pile cap increases and decreases respectively, and the slope of the p-y curve of the pile decreases.

• Journal of the Korean Society for information Management
• /
• v.40 no.3
• /
• pp.245-271
• /
• 2023

The purpose of this study was to assess the perception of e-book subscription services among the digitally native generation in their twenties, who have a high e-book usage rate. This study employed a mixed-methods approach, combining survey responses and usability testing. It aimed to assess the awareness and usage of e-book subscription services among university students in their twenties, a demographic known for their high utilization of electronic devices and e-books. The survey was conducted among 202 university students, and the responses were categorized and examined based on whether they were users or non-users. As a result of the survey, I found there is different awareness of e-book between users and non-users, on the other hand, convenience and portability are the strong point of e-books for users and non-users commonly also. Usability testing was performed on a group of 10 university students in their twenties who had not previously used the 'Millies Library' application, which is renowned as the most widely-used e-book platform. Following the experiment, participants expressed positive feedback regarding various optional features, convenience, design, and cost-effectiveness. However, they also had negative reactions concerning touch errors, malfunctions, functional practicality, a lack of interest, system issues, and the absence of a library.

• Korean Journal of Forensic Psychology
• /
• v.12 no.1
• /
• pp.53-73
• /
• 2021

This study is an experimental study comparing the psycho-physiological response differences of subjects according to the rapport building in polygraph tests. We randomly assigned 84 adults into a 2(veracity: Truth vs. Lie) x 2(rapport; Rapport building vs. Non-rapport building) between-subject design and measured ESS total scores as psycho-physiological responses. In order to manipulate the veracity conditions, participants in the truthful condition were told to tell their actual scores on several simple tasks but those in the lie condition were asked to tell higher scores than their actual scores. Afterwards all participants were polygraph tested in the order of pre-interview and main examination. The rapport conditions were manipulated by structured pre-interview scripts. As a result, there were significant differences in the examinee's total ESS scores depending on the veracity and rapport conditions. For truth-tellers, the ESS total scores were greater in the positive(+) direction in the rapport building condition than in the non-rapport building condition, indicating a prominent true response in the former condition. For liars, however, the ESS total scores were not significantly greater in the negative(-) direction in the rapport building condition than in the non-rapport building condition. Based on this study's results, we discussed the importance of rapport building in the pre-interview phase of a polygraph test and the need to operationalize verbal and non-verbal rapport building techniques.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.44-44
• /
• 2003

As a basic measurement tool in the areas of animal models of human disease, gene expression and therapy, and drug discovery and development, small animal PET imaging is being used increasingly. An ideal small animal PET should have high sensitivity and high and uniform resolution across the field of view to achieve high image quality. However, the combination of long narrow pixellated crystal array and small ring diameter of small animal PET leads to the degradation of spatial resolution for the source located at off center. This degradation of resolution can be improved by determining the depth of interaction (DOI) in the crystal and by taking into account the information in sorting the coincident events. Among a number of 001 identification schemes, dual layer phsowich detector has been widely investigated by many research groups due to its practicability and effectiveness on extracting DOI information. However, the effects of each crystal length composing dual layer phoswich detector on DOI measurements and image qualities were not fully characterized. In order to minimize the DOI effect, the length of each layer of phoswich detector should be optimized. The aim of this study was to perform simulations using a simulation tool, GATE to design the optimum lengths of crystals composing a dual layer phoswich detector. The simulated small PET system employed LSO front layer LuYAP back layer phoswich detector modules and the module consisted of 8${\times}$8 arrays of dual layer crystals with 2 mm ${\times}$ 2 mm sensitive area coupled to a Hamamatsu R7600 00 M64 PSPMT. Sensitivities and variation of radial resolutions were simulated by varying the length of LSO front layer from 0 to 10 mm while the total length (LSO + LuYAP) was fixed to 20 mm for 10 cm diameter ring scanner. The radial resolution uniformity was markedly improved by using DOI information. There existed the optimal lengths of crystal layers to minimize the variation of radial resolutions. In 10 cm ring scanner configuration, the radial resolution was kept below 3.4 mm over 8 cm FOV while the sensitivity was higher than 7.4% for LSO 5 mm : LuYAP 15 mm phoswich detector. In this study, the optimal length of dual layer phoswich detector was derived to achieve high and uniform radial resolution.