• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.652-659
• /
• 2005

Even in moderate to low seismic regions like Korean peninsular where wind loading usually governs the structural design of a tall building, the probable structural impact of the design basis earthquake or the maximum credible earthquake on the selected structural system should be considered at least in finalizing the design. In this study, by using response spectrum analysis and linear time history analysis method, seismic performance evaluation was conducted for wind-designed concentrically braced steel highrise buildings. Both spectrum-compatible artificial accelerograms and recorded accelerograms were used as input ground motions for the time history analysis. The analysis results showed that wind-designed concentrically braced steel highrise buildings possess significantly increased elastic seismic capacity due to the system overstrength resulting from the wind-serviceability criterion and the width-to-thickness ratio limits on steel members. Time history analysis results generally tended to underestimate the seismic response as compared to those of response spectrum analysis.

• Earthquakes and Structures
• /
• 제15권1호
• /
• pp.67-79
• /
• 2018

Malaysia and Singapore have adopted Eurocode 8 (EC8) for the seismic design of building structures. The authors studied the seismic hazard modelling of the region surrounding Malaysia and Singapore for a long time and have been key contributors to the drafting of the Malaysia National Annex (NA). The purpose of this paper is to explain the principles underlying the derivation of the elastic response spectrum model for Malaysia (Peninsular Malaysia, Sarawak and Sabah). The current EC8 NA for Singapore is primarily intended to address the distant hazards from Sumatra and is not intended to provide coverage for potential local intraplate hazards. Hence, this paper recommends a reconciled elastic response spectrum for Singapore, aiming to achieve a more robust level of safety. The topics covered include the modelling of distant interplate earthquakes generated offshore and local earthquakes in an intraplate tectonic setting, decisions on zoning, modelling of earthquake recurrences, ground motion and response spectrum. Alternative expression for response spectrum on rock, strictly based on the rigid framework of EC8 is discussed.

• 한국지진공학회논문집
• /
• 제17권2호
• /
• pp.89-95
• /
• 2013

Structures in a nuclear power system are designed to be elastic even under an earthquake excitation. However a structural component such as an isolator shows inelastic behavior inherently. For the seismic assessment of nonlinear structures, response history analysis should be performed. In this study, the response of base isolation system was analyzed by response history analysis for the seismic performance assessment. Firstly, several seismic assessment criteria for a nuclear power plant structure were reviewed for the nonlinear response history analysis. Based on these criteria, the spectrum matched ground motion generation method modifying a seed earthquake ground motion time history was adjusted. Using these spectrum matched accelerograms, the distribution of displacement responses of the simplified base isolation system was evaluated. The resulting seismic responses excited by the modified ground motion time histories and the synthesized time history generated by stochastic approach were compared. And the response analysis of the base isolation system considering the different intensities in each orthogonal direction was performed.

• 한국지구과학회지
• /
• 제28권7호
• /
• pp.871-877
• /
• 2007

최근 발생한 오대산지진(2007년 1월 20일)으로부터 관측된 지반진동 파형을 이용하여 응답스펙트럼을 분석하였으며, 결과를 국내 원자력 관련 구조물의 내진설계 기준과 비교하였다. 연구에 이용된 지반진동 개수는 수평성분 및 수직성분 각각 21개 및 8개이다. 지반진동을 이용하여 주파수별 지반응답을 구하고 정규화 분석 및 통계적 분석을 하였다. 본 연구결과를 국내 원자력시설물의 내진기준에 해당하는 Reg. Guide 1.60과 비교한 결과 특히 약 10 Hz 이상의 고주파수 영역에서 수직 및 수평 성분 모두 MPOSD스펙트럼이 Reg. Guide 1.60보다 높은 값을 보여 주었다. 따라서 향후 국내 지진활동 실정에 적합한 내진설계를 위해 수직 및 수평 성분 모두 10Hz 이상의 고주파수 대역에서 응답스펙트럼 값을 심각하게 고려할 필요가 있다.

• 한국지진공학회논문집
• /
• 제23권5호
• /
• pp.269-277
• /
• 2019

In a seismic design, a structural demand by an earthquake load is determined by design response spectra. The ground motion is a three-dimensional movement; therefore, the design response spectra in each direction need to be assigned. However, in most design codes, an identical design response spectrum is used in two horizontal directions. Unlike these design criteria, a realistic seismic input motion should be applied for a seismic evaluation of structures. In this study, the definition of horizontal spectral acceleration representing the two-horizontal spectral acceleration is reviewed. Based on these methodologies, the horizontal responses of observed ground motions are calculated. The data used in the analysis are recorded accelerograms at the stations near the epicenters of recent earthquakes which are the 2007 Odeasan earthquake, 2016 Gyeongju earthquake, and 2017 Pohang earthquake. Geometric mean-based horizontal response spectra and maximum directional response spectrum are evaluated and their differences are compared over the period range. Statistical representation of the relations between geometric mean and maximum directional spectral acceleration for horizontal direction and spectral acceleration for vertical direction are also evaluated. Finally, discussions and suggestions to consider these different two horizontal directional spectral accelerations in the seismic performance evaluation are presented.

• 한국지진공학회논문집
• /
• 제21권6호
• /
• pp.277-286
• /
• 2017

On September 12, 2016, Gyeongju earthquake occurred. Its local magnitude was announced to be $M_L=5.8$ by Korea Meteorological Administration (KMA). Ground motion data recorded at KMA, EMC and KERC stations was obtained from their data bases. From the data, horizontal and vertical response spectra, and V/H ratio were calculated. The horizontal spectrum was defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. Applying the same procedure, the shape and transition periods of vertical spectrum was obtained. These results were compared with the Korean standard design spectra, which were developed from domestic and overseas intraplate earthquake records. The response spectra of Gyeongju earthquake were found to be almost identical with the newly proposed design spectra. Even the V/H ratios showed good agreement. These results confirmed that the method adopted when developing the standard design spectra were valid and the developed design spectra were reliable.

• 한국지진공학회논문집
• /
• 제7권1호
• /
• pp.57-63
• /
• 2003

현수교의 지진응답 산정 시 몇 가지 해석법 간에 발생될 수 있는 차이를 파악하고자 하나의 예제 현수교에 대해 비교 연구를 수행하였다. 주된 검토항목은 선형과 비선형 응답응답스펙트럼법과 동적해석법, 그리고 감쇠율과 감쇠고려 방안이다. 검토 결과 대상 물리량이나 가진 방향에 따라 약간의 차이는 있지만 전체적으로 감쇠율과 감쇠 고려방안 등 감쇠와 관련된 변수가 지진응답에 큰 영향을 미치고 있음을 확인하였다. 반면 응답스펙트럼과 동적해석법, 선형 및 비선형해석법 등 구조해석법에 관련된 변수는 상대적으로 지진응답에 미치는 영향이 적은 것으로 확인되었다. 대상 현수교의 경우에도 응답스펙트럼법이 안전측의 결과를 줄 수 있을 것으로 기대되지만 이 경우 도로교설계기준에 제시된 설계응답스펙트럼을 감쇠율에 따라 적절히 보정하는 사전 작업이 필요랄 것으로 판단되었다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.257-259
• /
• 2008

Acceleration time history (ATH) used in the seismic analysis should envelop a target power spectral density (PSD) function in addition to the design response spectrum in order to have sufficient energy at each frequency for the purpose of ensuring adequate load. Even though design regulations require the ATH used in seismic analysis to meet a target PSD function, the reason that ATHs meet to a target PSD function is not described. Thus, artificial ATHs for high PSD function and artificial ATHs for low PSD function are generated. And then elastic and inelastic single-degree-of-freedom (SDOF) systems are loaded with these artificial time histories as the earthquake load. As a result, linear response and inelastic response of SDOF systems are affected by PSD function.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권1호
• /
• pp.154-162
• /
• 2019

세계적으로 지진과 같은 자연재해로 인한 대규모 피해가 증가하고 있다. 다양한 연구를 통하여 건물에 대한 내진성능은 확보되었으나, 비구조요소의 내진성능 확보 미흡으로 인하여 인명 피해 및 경제적 손실이 발생하고 있다. 비구조요소는 구조물에 설치되는 위치가 다양하고, 구조물의 위치에 따라 발생하는 진동특성이 다르므로 구조물의 위치별 응답스펙트럼이 필요하다. 또한 구조물의 형식과 구조물이 설치되는 위치에 따라 구조물에 발생하는 응답스펙트럼이 다르게 발생한다. 따라서 응답스펙트럼의 선정이 중요하므로 비구조요소에 작용하는 응답스펙트럼을 도출할 수 있는 명확한 방법이 필요하다. 본 논문에서는 응답스펙트럼을 도출하는 방법을 제안하였으며, 제안한 방법으로 국내에서 발생 가능한 지반응답스펙트럼과 구조시스템을 선정하여 구조해석을 수행하였다. 또한, 간단한 수식으로 응답스펙트럼을 도출하는 방법을 제안함으로서, 비구조요소의 내진시험에 필요한 응답스펙트럼을 생성할 수 있도록 하였다.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.65-72
• /
• 2009

도로교설계기준은 일반교량에 대한 내진설계방법으로 응답수정계수를 사용하는 스펙트럼해석법을 제시하고 있다. 그러나 중진지역이라는 한반도의 상황과 국내의 교량설계 및 시공환경에 대한 적용성은 아직 검증되지 않은 실정이다. 그러므로 도로교설계기준의 스펙트럼해석법을 적용하여 내진설계의 기본개념으로 제시되는 붕괴방지수준이 만족되는가에 대한 검토가 요구된다. 이 연구에서는 T형 및 ${\prod}$형 교각을 하부구조로 하는 두 개의 일반교량을 해석대상교량으로 선정하고, 중진지역의 설계조건과 스펙트럼해석법을 적용하여 내진설계를 수행하였다. 이 과정에서 응답수정계수의 역할과 붕괴방지수준의 만족여부를 검토하고, 그 결과를 토대로 설계기준에 보완해야 하는 사항을 제시하였다.