• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.35-43
• /
• 2016

Recently, the pipeline system for waste transportation has been increasingly constructed as new solution for the waste collection and disposal system by constantly increasing domestic waste which issued as social problem. The pipeline system is constructed through long distance, so proper long-term monitoring system is necessary which available to detect the damage location for the effective maintenance. In this paper, the experimental study is carried out to evaluate the applicability of optical strain gauge sensor based on FBG for the long-term monitoring system. Three test parameters such as pressure leaking, blockage and deformation are considered as typical damages for real-scale pipeline test specimen. In order to measure flexural and volumetric strain and temperature, three FBG sensors are installed at each monitoring sections. From the test results, this study suggested effective methods of sensor installation and arrangement. Also the sensor spacing for the design of monitoring system using FBG sensor is derived by the correlation of distances from deformation between sensor responses.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.11
• /
• pp.593-606
• /
• 2016

Computer simulation is widely used in a variety of computational science and engineering fields, including computational fluid dynamics, nano physics, computational chemistry, structural dynamics, and computer-aided optimal design, to simulate the behavior of a system. As the demand for the accuracy and complexity of the simulation grows, however, the cost of executing the simulation is rapidly increasing. It, therefore, is very important to lower the total execution time of the simulation especially when that simulation makes a huge number of repetitions with varying values of input parameters. In this paper we develop a simulation service system that provides the ability to predict the result of the requested simulation without actual execution for that simulation: by recording and then returning previously obtained or predicted results of that simulation. To achieve the goal of avoiding repetitive simulation, the system provides two main functionalities: (1) storing simulation-result records into database and (2) predicting from the database the result of a requested simulation using statistical machine learning techniques. In our experiments we evaluate the prediction performance of the system using real airfoil simulation result data. Our system on average showed a very low error rate at a minimum of 0.9% for a certain output variable. Using the system any user can receive the predicted outcome of her simulation promptly without actually running it, which would otherwise impose a heavy burden on computing and storage resources.

• Journal of the Korean Institute of Gas
• /
• v.19 no.2
• /
• pp.29-36
• /
• 2015

This study is an 1-D numerical study prior to modification of diesel engine for power plants to natural gas/diesel dual fuel engine using GT-Power with 1.5MW diesel engine for power generation. Natural gas injector was installed to intake manifold for dual fuel engine model. Effects on engine performance and characteristics were investigated when dual fuel is used in unmodified diesel engine. The analysis was done under 5 conditions from 0% to 40% of mixing rate on 720RPM engine speed. As a result of research, the engine performance was decreased as increasing ratio of natural gas. Engine brake power was decreased by 18.4% under 40% mixing rate condition. To clarify the reason, effects of injection timing and period were evaluated with DOE method. Considering this result, optimization was done for these parameters. Also, comparison between performances of dual fueled engine and diesel engine was made after optimizing the timing of injection by DOE method. As a result, engine brake power was decreased by 8.55% under mixing rate 40% condition showing 12.5% improvement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.328-328
• /
• 2007

Large area matrix-addressed image detectors are a recent technology for x-ray imaging with medical diagnostic and other applications. The imaging properties of x-ray pixel detectors depend on the quantum efficiency of x-rays, the generated signal of each x-ray photon and the distribution of the generated signal between pixels. In a phosphor coated detector the light signal is generated by electrons captured in the phosphor screen. In our study we simulated the lateral spread distributions for phosphor coupled detector by Monte Carlo simulations. Most simulations of such detectors simplify the setup by only taking the conversion layer into account neglecting behind. The Monte Carlo code MCNPX has been used to simulate the complete interaction and subsequent charge transport of x-ray radiation. This has allowed the analysis of charge sharing between pixel elements as an important limited factor of digital x-ray imaging system. The parameters are determined by lateral distribution of x-ray photons and x-ray induced electrons. The primary purpose of this study was to develop a design tool for the evaluation of geometry factor in the phosphor coupled optical imaging detector. In order to evaluate the spatial resolution for different phosphor material, phosphor geometry we have developed a simulation code. The developed code calculates the energy absorption and spatial distribution based on both the signal from the scintillating layer and the signal from direct detection of x-ray in the detector. We show that internal scattering contributes to the so-called spatial resolution drop of the image detector. Results from the simulation of spatial distribution in a phosphor pixel detector are presented. The spatial resolution can be increased by optimizing pixel size and phosphor thickness.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.233-245
• /
• 2007

Previous finite element studies have shown that AASHTO Standard load distribution factor (LDF) equations appear to be conservative for longer spans and larger girder spacing, but too permissible for short spans and girder spacing. AASHTO LRFD specification defines the distribution factor equation for girder spacing, span length, slab thickness, and longitudinal stiffness. However, this equation requires an iterative procedure to correctly determine the LDF value due to an initially unknown longitudinal stiffness parameter. This study presents a simplified LDF equation for interior and exterior girders of two-span continuous I-girder bridges that does not require an iterative design procedure. The finite element method was used to investigate the effect of girder spacing, span length, slab thickness, slab width, and spacing and size of bracing. The computer program, GTSTRUDL, was used to idealize the bridge superstructures as the eccentric beam model, the concrete slab by quadrilateral shell elements, steel girders by space frame members, and the composite action between these elements by rigid links. The distribution factors obtained from these analyses were compared with those from the AASHTO Standard and LRFD methods. It was observed through the parametric studies that girder spacing, span length, and slab thickness were the dominant parameters compared with others. The LRFD distribution factor for the interior girder was found to be conservative in most cases, whereas the factor for the exterior girder to be unconservative in longer spans. Furthermore, a regression analysis was performed to develop simplified LDF formulas. The formulas developed in this study produced LDF values that are always conservative to those from the finite element method and are generally smaller than the LDF values obtained from the AASHTO LRFD specification. The proposed simplified equation will assist bridge engineers in predicting the actual LDF in two-span continuous I-girder bridges.

• Journal of Korea Water Resources Association
• /
• v.44 no.1
• /
• pp.65-72
• /
• 2011

Natural streams meander, forming pools at the outer part of bend and riffles at the crossing. Pools are deep at a lower flow velocity, and riffles are shallow at a higher flow velocity. Attentions are being paid to pool-riffle sequences in meandering streams because pool-riffle sequences tend to increase biodiversity of the stream ecosystem. This study investigates the characteristics of distribution of bed sediment particles in the upstream reach of the Gap Stream, which is a tributary of the Geum River in Korea. The upstream part of the Gap Stream, the study reach, is a gravel-bed stream, showing a pool and three riffles due to meandering. The reach also includes pools at the upstream and downstream parts of the weir. The characteristics of bed sediment particles sampled at the wetland and in the side channel are studied, revealing that the median particle diameter in the riffle is about four times larger than that in the pool. In addition, flow simulations are carried out for ordinary discharge and design flood, and such parameters important to sediment transport as velocity, shear stress, dimensionless shear stress (or Shields number), and dimensionless shear velocity are provided to see the mobility of sediment particles in the pool-riffle sequence.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.4
• /
• pp.218-221
• /
• 2005

The present study was investigated in the Chittagong hill forest of Bangladesh to assess the feasibility of ginger cultivation under multipurpose forest and fruit tree species. There were three treatments such as i) ginger grown under open field condition, ie. full sunlight (T1), ii) ginger grown under Gamar tree (spacing of $90{\times}90cm$ (T2) and iii) ginger grown under guava tree (spacing $180{\times}180cm$) tree (T3). The experiment was laid out in randomized block design (RBD) and each treatment was replicated three times. From data it was observed that some morphological parameters of ginger such as plant height, number of leaves per plant, leaf length and leaf breadth were higher in the treatments T2 and T3 as compared to the treatment T1. A positive and linear relationship was observed between the weight of rhizome and yield of ginger which caused the highest yield of ginger ($23.63Mg\;ha^{-1}$) under guava tree species at partial shaded condition in the T3 treatment ($180{\times}180cm$), whereas the lowest yield ($15.64Mg\;ha^{-1}$) was recorded in the T2 treatment when ginger was cultivated under Gamar tree species at closer spacing ($90{\times}90cm$). Therefore, it was revealed that partial shaded condition favoured the optimum growth and yield of ginger, whereas the dense shade from intensively planted tree species badly affected the dry matter production and yield of ginger.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.195-201
• /
• 2016

Eddy current testing (ECT) is commonly applied for the inspection of automated production lines of metallic products, because it has a high inspection speed and a reasonable price. When ECT is applied for the inspection of a metallic object having an uneven target surface, such as the spline gear of a spline shaft, it is difficult to distinguish between the original signal obtained from the sensor and the signal generated by a defect because of the relatively large surface signals having similar frequency distributions. To facilitate the detection of defect signals from the spline gear, implementation of high-order filters is essential, so that the fault signals can be distinguished from the surrounding noise signals, and simultaneously, the pass-band of the filter can be adjusted according to the status of each production line and the object to be inspected. We will examine the infinite impulse filters (IIR filters) available for implementing an advanced filter for ECT, and attempt to detect the flaw signals through optimization of system design parameters for detecting the signals at the system level.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.17-23
• /
• 2016

In the future network such as Internet of Things (IoT), the number of computing devices are expected to grow exponentially, and each of the things communicates with the others and acquires information by itself. Due to the growing interest in IoT applications, the broadcasting in Opportunistic ad-hoc networks such as Machine-to-Machine (M2M) is very important transmission strategy which allows fast data dissemination. In distributed networks for IoT, the energy efficiency of the nodes is a key factor in the network performance. In this paper, we propose a fuzzy logic based probabilistic multi-hop broadcast (FPMCAST) algorithm which statistically disseminates data accordingly to the remaining energy rate, the replication density rate of sending node, and the distance rate between sending and receiving nodes. In proposed FPMCAST, the inference engine is based the fuzzy rule base which is consists of 27 if-then rules. It maps input and output parameters to membership functions of input and output. The output of fuzzy system defines the fuzzy sets for rebroadcasting probability, and defuzzification is used to extract a numeric result from the fuzzy set. Here Center of Gravity (COG) method is used to defuzzify the fuzzy set. Then, the performance of FPMCAST is evaluated through a simulation study. From the simulation, we demonstrate that the proposed FPMCAST algorithm significantly outperforms flooding and gossiping algorithms. Specially, the FPMCAST algorithm has longer network lifetime because the residual energy of each node consumes evenly.

• Journal of Distribution Science
• /
• v.12 no.8
• /
• pp.43-54
• /
• 2014

Purpose - This study was based on a theoretical consideration of the structural relationship between the support and control of the franchisor and the satisfaction and strategic response (voice, loyalty, exit, neglect) of the franchisee. First, based on the preceding research, this study systematically organized the type of support and control of the franchisor. Second, the study examined the effects of a franchisor's support and control on the expectancy disconfirmation between affiliated franchisees' expectations before a franchise agreement and performance after operating an affiliated store. Third, the study looked into the effects of expectancy disconfirmation relating to a franchisor's support and control on an affiliated franchisees' general satisfaction. Fourth, this study examined the influence of the general satisfaction of a franchisee on affiliated franchisees' response strategies. Research design, data, and methodology - In this study, the population comprised the nation's franchisors, and the sample comprised franchisees conducting business in Seoul and Gyeonggi-do. A self-administered questionnaire was used; the author and examiner explained the study's parameters to the interviewees in advance, to lessen the rate of rejection of the answers and to maintain reliability. The author distributed 350 copies of the questionnaire and collected 327 copies (93.4%). The author removed 54 copies of the sample, as these copies belonged to franchisees that were not registered by the Fair Trade Commission and/or were thought to have either defects or inadequate answers. The author selected an effective sample of 273 copies to enter data and to do the statistical analysis. Results - Both a reliability analysis and a confirmatory factor analysis were performed to measure reliability and validity, and a structural equation model was used to conduct the hypothesis test and investigate the models. The hypothesis was tested (Table 5). The models had a suitable fit, for instance, χ² = 447.663(df = 212, p = .000), χ²/df = 2.112, GFI = .881, AGFI = .858, RMR = .083, RMSEA = .067, NFI = .932, and CFI = .961. The hypothesis test results were as follows. Hypothesis 1 was accepted (C.R. = -2.339, p = .019). Hypothesis 2 was accepted (C.R. = 15.213, p = .000). Hypothesis 3 was accepted (C.R. = -2.631, p = .006). Hypothesis 4 was accepted (C.R. = 16.271, p = .000). Hypothesis 5 was accepted (C.R. = 2.391, p = .017). Hypothesis 6 was accepted (C.R. = 5.777, p = .000). Hypothesis 7 was accepted (C.R. = 17.153, p = .000). Hypothesis 8 was accepted (C.R. = 24.746, p = .000). Hypothesis 9 was accepted (C.R. = -10.150, p = .000). Hypothesis 10 was accepted (C.R. = -12.124, p = .000). Conclusions - The research results showed that expectations for a franchisor's support and control had a significant influence on expectation disconfirmation in a negative way, whereas the performance of support and control were found to have a significant influence on expectation disconfirmation in a positive way. In addition, the expectation disconfirmation of support and control was found to have a significant influence on satisfaction of franchisees in a positive way. Generally, regarding the research on control, control is found to have a negative influence on the satisfaction of franchisees, but this study proves that control is found to affect it in a positive way through conformity.