• 제목/요약/키워드: design moment

검색결과 2,253건 처리시간 0.028초

Analysis of activated colloidal crud in advanced and modular reactor under pump coastdown with kinetic corrosion

  • Khurram Mehboob;Yahya A. Al-Zahrani
    • Nuclear Engineering and Technology
    • /
    • 제54권12호
    • /
    • pp.4571-4584
    • /
    • 2022
  • The analysis of rapid flow transients in Reactor Coolant Pumps (RCP) is essential for a reactor safety study. An accurate and precise analysis of the RCP coastdown is necessary for the reactor design. The coastdown of RCP affects the coolant temperature and the colloidal crud in the primary coolant. A realistic and kinetic model has been used to investigate the behavior of activated colloidal crud in the primary coolant and steam generator that solves the pump speed analytically. The analytic solution of the non-dimensional flow rate has been determined by the energy ratio β. The kinetic energy of the coolant fluid and the kinetic energy stored in the rotating parts of a pump are two essential parameters in the form of β. Under normal operation, the pump's speed and moment of inertia are constant. However, in a coastdown situation, kinetic damping in the interval has been implemented. A dynamic model ACCP-SMART has been developed for System Integrated Modular and Advanced Reactor (SMART) to investigate the corrosion due to activated colloidal crud. The Fickian diffusion model has been implemented as the reference corrosion model for the constituent component of the primary loop of the SMART reactor. The activated colloidal crud activity in the primary coolant and steam generator of the SMART reactor has been studied for different equilibrium corrosion rates, linear increase in corrosion rate, and dynamic RCP coastdown situation energy ratio b. The coolant specific activity of SMART reactor equilibrium corrosion (4.0 mg s-1) has been found 9.63×10-3 µCi cm-3, 3.53×10-3 µC cm-3, 2.39×10-2 µC cm-3, 8.10×10-3 µC cm-3, 6.77× 10-3 µC cm-3, 4.95×10-4 µC cm-3, 1.19×10-3 µC cm-3, and 7.87×10-4 µC cm-3 for 24Na, 54Mn, 56Mn, 59Fe, 58Co, 60Co, 99Mo, and 51Cr which are 14.95%, 5.48%, 37.08%, 12.57%, 10.51%, 0.77%, 18.50%, and 0.12% respectively. For linear and exponential coastdown with a constant corrosion rate, the total coolant and steam generator activity approaches a higher saturation value than the normal values. The coolant and steam generator activity changes considerably with kinetic corrosion rate, equilibrium corrosion, growth of corrosion rate (ΔC/Δt), and RCP coastdown situations. The effect of the RCP coastdown on the specific activity of the steam generators is smeared by linearly rising corrosion rates, equilibrium corrosion, and rapid coasting down of the RCP. However, the time taken to reach the saturation activity is also influenced by the slope of corrosion rate, coastdown situation, equilibrium corrosion rate, and energy ratio β.

소규모 지하굴착에서 지중경사계와 변형률계의 최적 위치 선정에 대한 연구 (A Study on the Optimal Location of the Inclinometer and Strain Gauge in Small-Scale Underground Excavation)

  • 강기천;박진욱;노병진;손가호;윤성규
    • 한국지반신소재학회논문집
    • /
    • 제22권2호
    • /
    • pp.23-33
    • /
    • 2023
  • 현재 국내에서는 흙막이 가시설 공사에서 계측기 설치 및 운영기준이 모호하여 공사현장에서 흙막이 공사의 붕괴사고를 사전에 예방하지 못하여 경제적 피해가 발생한 사례가 있다. 따라서 본 연구에서는 흙막이 가시설 설계도면에 제시되어 있는 계측기 중 지중경사계 및 변형률계의 적합한 설치 위치를 찾고자 수치해석을 통한 연구를 진행하였다. 해석결과 지중경사계의 설치 위치는, 평면변형 해석의 경우 가시설의 우각부에서, 3차원 해석의 경우는 굴착면의 중심부에서 가장 많은 변위가 일어나는 것으로 나타났다. 지반응력과 모멘트를 종합적으로 분석하였을 때 우각부가 취약지점으로 판단된다. 변형률계의 경우 평면 변형 해석과 3차원 해석에서 버팀대 끝단과 맞버팀대가 접하는 띠장 접속부에서 최대 휨 응력이 발생하였다. 이 지점에서 취약 부분으로 사고예방을 위해서는 접속부에 중점적 설치 및 관리가 필요한 것으로 분석된다.

탄소성 방법과 유한요소법에 의한 붕괴 토류벽의 거동차이 분석 (Characteristics of Collapsed Retaining Walls Using Elasto-plastic Method and Finite Element Method)

  • 정상섬;김영호
    • 한국지반공학회논문집
    • /
    • 제25권4호
    • /
    • pp.19-29
    • /
    • 2009
  • 본 연구에서는 실제 붕괴가 발생한 토류벽을 대상으로 해석 기법에 따른 시공단계별 거동특성을 분석하기 위하여, 단계별 굴착에 따른 토류벽의 변위, 휨모멘트, 토압분포, 예상 활동 파괴면을 수치해석을 통해 분석하였다. 특히 수치해석에 사용되는 해석기법으로, 벽계와 지반의 상호작용이 고려되는 전단강도 감소기법과 상호작용을 고려하지 않는 탄소성 해석으로 나누어 해석기법에 따른 벽체의 거동 차이를 비교 하였다. 본 연구결과, 벽체의 휨모멘트와 토압은 해석기법에 따른 차이가 크지 않았지만, 지표 근처에서의 벽체 변위는 큰 차이를 나타냈다. 또한 실측 데이터와의 비교결과 탄소성 해석을 통한 해석 결과가 전단강도 감소기법을 통한 해석 결과보다 전체적으로 변위 및 파괴면 예측에서 과소 평가 되는 것으로 나타났다. 따라서, 전단강도 감소기법을 통한 유한요소 해석은 벽체의 시공 안정성 및 붕괴 후 원인 분석 등의 좀 더 세밀한 검토가 필요한 작업에서 유용하게 사용할 수 있으며, 탄소성 해석기법은 1차적인 설계 정도에 사용하여야 할 것으로 판단된다.

노면 포장별 차량의 제동경과시간 및 마찰계수에 관한 실험적 연구 (The Experimental Study on the Transient Brake Time of Vehicles by Road Pavement and Friction Coefficient)

  • 임창식;최양원
    • 대한토목학회논문집
    • /
    • 제30권6D호
    • /
    • pp.587-597
    • /
    • 2010
  • 교통사고가 발생하면 사고 당사자들은 민 형사적인 문제에서 자유롭지 못하기 때문에, 교통사고 조사자는 사고 상황을 정확하게 재현 또는 분석을 하여야 한다. 또한, 이러한 교통사고 발생과 관련한 요인에 대한 분석을 통해 얻어진 자료를 활용하여 교통사고 다발지역의 개선 및 보완작업을 시행하게 된다. 현재까지 알려진 바로는 수많은 교통사고, 교통시설물, 도로설계 등과 관련하여 가장 많은 영향을 미치는 요인은 차량의 속도와 가속능력, 제동능력 등이다. 이는 자동차의 성능과 노면의 마찰계수가 가장 밀접한 영향을 미치는 부분이다. 특히, 사고 순간의 속도의 추정은 교통사고처리특례법의 11개 주요항목인 과속과 관련하여 매우 중요한 사항이기에 정확성이 요구되는 부분이다. 하지만, 국내에서는 아직 이러한 부분에 대한 심도 있는 연구가 많이 진행되지 못하는 것이 현실이다. 이러한 현실을 반영하여 본 연구에서는 차량의 급제동에서 제동흔적이 발생되기 시작할 때까지의 시간인 제동경과시간을 정밀가속도계(Vericom VC2000PC)로 측정하여 제동경과시간과 노면의 마찰계수를 정확히 추정하였다. 실험결과를 분석하여, 여러 가지 특수 아스팔트 포장 및 미끄럼방지포장 종류에 따른 제동경과시간과 마찰계수를 계산하여 연구의 목적에 맞도록 기초자료를 제공하고자 하였다.

Do good return policies work across cultures? Effect of lenient return policies on online shopper perceptions in Eastern culture

  • Yang, SuJin;Choi, Yun Jung
    • Asia Marketing Journal
    • /
    • 제15권2호
    • /
    • pp.75-97
    • /
    • 2013
  • While good return policies are suggested as one of the critical services for e-commerce, ambivalence between the burden of the cost and shoppers' satisfaction may prevent e-tailers from increasing their level of leniency. Based on the S-O-R model, this study has attempted to develop a grounded theory to explain how lenient return policies shape online shoppers' perceptions and responses, with a focus on cultural influences in the relationship. In order to check the cultural effects of the lenient return policy, thirty two female and eleven male undergraduate students in South Korean shoppers, who are accustomed to strict return policies, participated in the semi-structured interview. A series of open-ended questions were designed to explore consumers' reactions toward four different levels of the lenient return policy: from the strict type in South Korea to the lenient type in the U.S. Using qualitative research methods, this research has defined three types of dimensions of lenient return policy: return possible period, complexity of progress, and other restrictions. While previous researchers did not pay much attention, the last dimension, other restrictions, is shown to be the most significant in influencing online shoppers' perceptions, especially in South Korea. Also, the impacts on online shoppers' perceptions from the three types of sub-dimensions of return policy were somewhat different. Whereas a longer return possible period was considered more favorable, a medium level of complexity and restrictions were considered more desirable. In summary, this result showed that shoppers in Eastern cultures, i.e. South Korean online shoppers, seem favorable to a medium level of lenient return policies, while allowing for taking precautions against possible fraudulent behaviors and setting other restrictions. Therefore, most of retailers in South Korea recommended that e-tailers who adopt the most lenient return policies raise the bar to guard ethical shoppers from fraudulent users. Next, lenient return policies can enhance ease of use, usefulness, affect, and trust while relieving perceived risk, which is connected to intention to purchase, satisfaction, and loyalty. Interestingly, lenient return policies are more likely to change the behavioral responses of online shoppers, such as return and purchase, rather than change their attitudes or beliefs such as image, satisfaction, and loyalty. This tendency can be seen more clearly in the direct influences of return policy on responses. The reaction to lenient return policy is mostly the intention to return or to purchase. This suggests that return policy serves the e-tailers as a powerful tool in increasing online shoppers' purchase intention at the moment of purchase. Therefore, e-tailers who plan to expand their market to eastern countries, including South Korea, have to build a shield of restrictions around their lenient return policy, rather than immediately applying their original liberalized return policy. Also, e-tailers in South Korea need to review their strict and undifferentiated return policies to deal with the unsatisfied reactions of online shoppers toward their normal return policies. Although the present study was confined to the return policies currently being practiced by popular e-tailers, it would be worthwhile to develop effective return policies separately for each country, especially South Korea, keeping the culture of the relevant country in mind.

  • PDF

원심모형실험을 이용한 그룹 삼축 마이크로파일의 동적거동 평가 (Evaluation of the Dynamic Behavior of Inclined Tripod Micropiles Using Dynamic Centrifuge Test)

  • 김윤아;권태혁;김종관;한진태;김재현;안성율
    • 한국지반공학회논문집
    • /
    • 제39권12호
    • /
    • pp.93-102
    • /
    • 2023
  • 최근 건축물 구조 기준의 개정으로 말뚝 기초의 내진성능 강화가 강조되고 있음에도 불구하고, 현재 건축물 기초의 내진설계는 비용과 시공상의 어려움으로 충분한 시행이 이루어지지 않고 있다. 본 연구에서는 지진 시 수평 및 수직 하중에 효과적으로 대응할 수 있는 구조로 제안된 삼축 마이크로파일(TMP)의 지진 시 동적 거동을 평가하고자 하였다. 동적 원심모형실험을 통해 설치 각도가 15°인 그룹 삼축 마이크로파일과 설치 각도가 0°인 연직 군말뚝의 가속도, 변위, 휨모멘트, 축력 등의 동적 거동이 비교 분석되었다. 실험 결과에 따르면 가속도와 수평 및 수직 변위 결과를 바탕으로 살펴보았을 때 탁월 주기가 0.5 초 미만인 실지진파 가진 조건에서 경사진 그룹 삼축 마이크로파일의 내진성능은 연직 군말뚝보다 좋거나 비슷한 수준으로 평가된다. 그러나 Sine 2Hz와 같은 장주기의 강한 지진 가진 시에는 경사진 삼축 마이크로파일의 응답이 전반적으로 수직 마이크로파일보다 크게 나타났다. 협소한 공간에서 기존 시설물의 단주기 지진파에 대한 응답을 줄이는 내진보강이 필요한 경우 경사진 삼축 마이크로파일이 수직 마이크로파일의 대안으로 활용 될 수 있을 것으로 판단된다.

분절형 복부 중공 프리스트레스트 콘크리트 교량 거더의 설계 및 실물크기 휨 실험 분석 (Design and Full Size Flexural Test of Spliced I-type Prestressed Concrete Bridge Girders Having Holes in the Web)

  • 한만엽;최석환;전용식
    • 대한토목학회논문집
    • /
    • 제31권3A호
    • /
    • pp.235-249
    • /
    • 2011
  • I형 PSC 거더에 새로운 설계 개념을 도입하여 낮은 형고의 장경간 거더를 설계하고, 실험을 통해서 적용성을 점검하였다. 본 연구에서 제안하는 거더는 복부에 개구부를 도입한 분절형 중공 프리캐스트 프리스트레스트 콘크리트 거더(HWPC거더, Holed Web Prestressed Concrete girders)이다. 이 거더의 설계에는 세 가지 설계 개념이 종합적으로 적용되었다. 먼저 장경간의 거더를 공장에서 프리캐스트로 타설하여 양생을 마친 후에 현장으로 운반하는 방법을 채택하여 현장에서 거더를 제작하는 경우보다 콘크리트의 품질 관리가 용이하게 하여 고강도 및 고성능 콘크리트를 적용하는 것이 가능하게 하였다. 또한 거더를 분절화하여 제작하여 국내의 도로 여건에서도 장경간 거더를 공장에서 현장으로 이동시킬 수 있게 하였다. 이로써 현장에서의 작업 기간도 단축시킬 수 있다. 두 번째로 거더의 복부에 원형의 개구부를 도입하여, 단부 정착장치의 반을 이 개구부 내에 이동하여 분산 배치하여, 분절 거더의 조립에 사용하였다. 개구부에 정착부를 분산 배치하면 단부에 설치되는 정착장치가 줄어들게 되므로 단부에 작용하는 응력이 줄어들게 된다. 아울러 자연스레 단부에 도입되는 휨모멘트는 줄어들고, 중앙부에 큰 휨모멘트가 도입되므로 외력으로 인한 휨모멘트 분포에 더 가까운 형상의 부모멘트를 거더에 도입할 수 있다. 거더에 개구부를 도입하면 거더 자중도 줄어든다. 그리고, 세째로 단부에 설치되는 정착구의 수가 줄기 때문에 단부에서는 다이아프램을 제거하고도 정착이 가능하다. 이렇게 거더의 전 단면에 걸쳐서 같은 폭의 복부폭을 사용하면 거더 제작을 자동화 하는데도 도움이 될 것이다. HWPC거더의 설계 기법을 검증하고, 다단계 긴장의 효과 및 실제교량에 적용할 때 발생할 수 있는 문제점을 고찰하기 위하여 실물 실험을 수행하였다. 길이 50 m, 높이 2 m인 거더 실험체를 분절형과 일체형으로 각각 1개씩 제작하여 휨실험을 수행하고, 결과를 비교하여 분석하였다. 분절형 거더와 일체형 거더는 처짐 및 균열생성 형상에서 근본적으로 유사하였다. 휨 강도, 처짐, 활하중 처짐제한 규정 등이 특정 설계기준을 만족하도록 설계하는 것이 가능하였다.

특약매입과 콘사인먼트 비교분석 (A Comparative Analysis of Teukyakmeip and Consignment)

  • 김동호;김성수;정명희;윤명길
    • 유통과학연구
    • /
    • 제12권4호
    • /
    • pp.5-9
    • /
    • 2014
  • Purpose - The purpose of this study was to compare and contrast the applicability and effectiveness of both teukyakmeip contracts of Korea and consignment contracts of the United State to demonstrate the effectiveness and practicability of teukyakmeip in Korea. These are popular contract agreements between large retailers and their suppliers and vendors. In recent years, teukyakmeip was critically examined and scrutinized by the politicians, the media, and the public of Korea. Consequently, this paper focusesheavily on identifying and analyzing different types of contract agreements between large retailers and their suppliers that currently exist in Korea and compares and contrasts those analyzed contract agreements with teukyakmeip. The article also comparesand contrasts teukyakmeip with the consignment agreements of the United States to identify similarities and differences. Research design, data, and methodology - This study is a descriptive study and has used personal interviews to collect and analyze the data. This study also fits the definition of the case study wherein it is entirely focused on investigating a real-life event: analyzing and examining contract agreements in the distribution industry. Both randomly selected management and vendor representatives from the three major department stores, Lotte, Hyundai, and Shinsegae, in Korea were interviewed between July and September 2013. The analysis of the consignment agreement was conducted based on existing secondary data. Results - Although the evidence of the abuse of teukyakmeip and consignment by large retailers from both countries clearly exists, the findings suggestthat both contract agreements would remain as the most relevant and effective legal contracts between large retailers and their suppliers. Based on the comparisonanalysis of teukyakmeip and consignment, both contracts indicated that suppliers are fully responsible for inventory and inventory management. If sales person is necessary for promoting special product, then suppliers are responsible for providing a sales person and their wages under both contracts. However, American department stores, those located outside urban area, tend to use their own employees to perform special product and sales promotion. The retailersare fully responsible for any interior or floor design or redesign of the retail store to accommodate the products from vendors under consignment; however, both suppliers and retailers share the cost of designing and redesigning the interior to accommodate vendors'products under teukyakmeip. Suppliers are responsible for pricing and supplying the quantity of the products under both agreements. Both contracts allow special sales commission as long as vendors agreed. Vendors use this special commissionto introduce their new products or apply market penetration strategy. Conclusions -The findings of this study showed the changing pattern of contract agreements between large retailers and their suppliers from both countries. Furthermore, this study evidently generated policy implications of teukyakmeip which recently became the major social issue in Korea and attracted many policymakers to gain political points by criticizing the teukyakmeip system and the large retailers. The findings of the study would be valuable to policy makers in making appropriate decisions and to large retailers and vendors in making beneficial agreements. The major implication of this study is that teukyakmeip and consignment agreements include very similar or almost identical characteristics, and they are popular among department stores and suppliers. The issue of abolishing teukyakmeip in Korea needs to be examined cautiously because teukyakmeip is the best one available at the moment, and the study suggests that no one benefits from abolishing this system.

봉지막이 박형 실리콘 칩의 파괴에 미치는 영향에 대한 수치해석 연구 (Effects of Encapsulation Layer on Center Crack and Fracture of Thin Silicon Chip using Numerical Analysis)

  • 좌성훈;장영문;이행수
    • 마이크로전자및패키징학회지
    • /
    • 제25권1호
    • /
    • pp.1-10
    • /
    • 2018
  • 최근 플렉서블 OLED, 플렉서블 반도체, 플렉서블 태양전지와 같은 유연전자소자의 개발이 각광을 받고 있다. 유연소자에 밀봉 혹은 봉지(encapsulation) 기술이 매우 필요하며, 봉지 기술은 유연소자의 응력을 완화시키거나, 산소나 습기에 노출되는 것을 방지하기 위해 적용된다. 본 연구는 봉지막(encapsulation layer)이 반도체 칩의 내구성에 미치는 영향을 고찰하였다. 특히 다층 구조 패키지의 칩의 파괴성능에 미치는 영향을 칩의 center crack에 대한 파괴해석을 통하여 살펴보았다. 다층구조 패키지는 폭이 넓어 칩 위로만 봉지막이 덮고있는 "wide chip"과 칩의 폭이 좁아 봉지막이 칩과 기판을 모두 감싸고 있는 "narrow chip"의 모델로 구분하였다. Wide chip모델의 경우 작용하는 하중조건에 상관없이 봉지막의 두께가 두꺼울수록, 강성이 커질수록 칩의 파괴성능은 향상된다. 그러나 narrow chip모델에 인장이 작용할 때 봉지막의 두께가 두껍고 강성이 커질수록 파괴성능은 악화되는데 이는 외부하중이 바로 칩에 작용하지 않고 봉지막을 통하여 전달되기에 봉지막이 강하면 강한 외력이 칩내의 균열에 작용하기 때문이다. Narrow chip모델에 굽힘이 작용할 경우는 봉지막의 강성과 두께에 따라 균열에 미치는 영향이 달라지는데 봉지막의 두께가 작을 때는 봉지막이 없을 때보다 파괴성능이 나쁘지만 강성과 두께의 증가하면neutral axis가 점점 상승하여 균열이 있는 칩이 neutral axis에 가까워지게 되므로 균열에 작용하는 하중의 크기가 급격히 줄어들게 되어 파괴성능은 향상된다. 본 연구는 봉지막이 있는 다층 패키지 구조에 다양한 형태의 하중이 작용할 때 패키지의 파괴성능을 향상시키기 위한 봉지막의 설계가이드로 활용될 수 있다.

동영상 광고에서 나타나는 '소격화' 효과에 관한 연구 - 광고 <017-I-Touch편 (손이 물갈퀴) >를 중심으로 -관어영시광고중소출현적‘맥생화’효과적연구(關於影視廣告中所出現的‘陌生化’效果的硏究) (A Study on 'Verfremdung' effects in visual advertisements with a special reference to the <017-I-Touch series, The Hand Transformed into a Web >, mobile network advertisement)

  • 김일용;안상수;김종덕
    • 디자인학연구
    • /
    • 제18권2호
    • /
    • pp.37-46
    • /
    • 2005
  • 오늘날 광고는 영상광고가 지배한다. 특히 동영상 광고는 광고의 여러 가지 형태 가운데 전달하려고 하는 정보를 가장 효과적으로 전달할 수 있는 매체로서, 멀티 미디어의의 효과로 생동감 있는 화면을 전달하며 대중들의 소비심리를 자극하고 촉진시킨다. 최근의 몇몇 동영상 광고에서도 '소격화' 효과가 두드러짐을 볼 수 있다. '소격화'는 브레히트의 서사극에서 중요한 표현으로 사용되었던 용어이다. 이것은 전통 희곡과는 다르게 관객들에게 감정이입이 아니라, 오히려 감정을 차단시키는 효과를 가져옴으로써 연극에 몰입되지 않고 관람자로서 자신의 위치를 깨닫게 되며 연극에 대한 비판의식을 가지게 된다. 그 효과들은 '낯설게 하기 '관객의 참여' '현실의 비판' '속도'의 표현을 통하여 나타나고 있다. <017-I-Touch편 (손이 물갈퀴) >는 이동 통신사인 신세기 통신의 아이터치 브랜드의 광고로서 '내 혈액형은 i' 라는 카피를 내세운다. 여기서 현실에서는 있을 수 없는 허구의 영상이 나타나는데 편의상 여섯 개의 장면으로 나누어 볼 수 있다. 배경으로 등장하는 바다는 전체 장면을 유도하고 있지만 하나의 내용으로 일관성 있는 장면의 진행이 아이라 각각 독립된 장면으로서, 서로 낯설게 하는 '소격화'된 내용들이 뒤섞여 있음을 볼 수 있다. 소비자들은 이러한 순간적인 '소격화'의 효과와 함께 후기모더니즘 광고의 언어적 표현을 더 깨닫게 한다. 장면과 장면 '사이의 '차이'에 의한 '소격화'는 서로 거리를 두게 하고, 각 장면 사이의 생략으로 인한 광고는 '속도감' 있게 연출된다. 광고에서 관객은 처음에는 전체적으로 한 번에 이해되지 않는 파편처럼 보이는 내용들에 대해 당혹감을 느끼게 된다. 이러한 당혹감과 충격은 관객들의 뇌리에 오래 남아 광고 자체가 큰 주목을 끄는 효과를 가져오게 한다. 짧고 강렬한, 그러나 파편화된 장면으로 구성된 동영상 광고에 반복적으로 노출되는 관객은 곧 이러한 당혹감을 극복하고 각각 장면의 단절된 부분에 적극적으로 자신의 상상력을 개입시켜 이를 이해 가능한 내용으로 구성하려는 능동적인 시도를 하게 된다. 이 과정에서 브랜드 이미지를 소비자에 각인시키려는 광고의 목적이 달성되는 것이다. 이는 연극에서 관객들의 이성을 환기시켜 객관적이고 비판적인 의식을 환기시키는 브레히트의 '소격화'의 효과가 소비자의 관심을 환기시켜 특정한 목적을 달성하려는 광고에 효율적으로 적용된 예 인 것이다.

  • PDF