• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 추계학술발표대회 논문집
• /
• pp.181-184
• /
• 2004

The Presentation show the Interior Design for Environmental Early Age, with Motive Montessori Method that 'Environmetal Prepared'. there is Concentral System in Architecture from PEDAGOGIA. in the Class, students can application for ' Casa dei Bambini' through historical architecture from nothen Italy and the matter needs consideration about Planning interior for Environmetal Childhood. as presented on Pannel with Graphic, there are four major motives of Design Process ; Activities classwork, understanding Method Montessori, Design exterior from Concentral System and the Interior Design.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.44-50
• /
• 2003

Design method for involute bevel gears is developed. The developed gear design system can design the optimized gear that minimize the number of pinion teeth with face tooth. Method of optimization is MS(matrix search) which is developed from this study. Design variables are pressure angle 20., transmitted power, gear volume, gear ratio, allowable contact stress and allowable bending stress. etc. Gears design method developed this study can be applied to the plane, helicopter, printer, machine tools.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.672-676
• /
• 2002

In this paper, a reliability-based design optimization method, which enables the determination of optimum design that incorporate confidence range for structures, is studied. Response surface method and Monte Carlo simulation are utilized to determine limit state function. The proposed method is applied to the I-type steel structure for reliability based optimal design.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.344-352
• /
• 2019

To achieve high efficiency and reliability, multiphase interleaved converters with coupled inductors have been widely applied. In this paper, a coupled inductor design method for 2-phase interleaved boost converters is presented. A new area product equation is derived to select the proper core size. The wire size, number of turns and air gap length are also determined by using the proposed coupled inductor design method. Finally, the validity of the proposed coupled inductor design method is confirmed by simulation and experimental results obtained from a design example.

• 한국건설관리학회논문집
• /
• 제4권3호
• /
• pp.119-127
• /
• 2003

오늘날 프로젝트 수행방식 중 설계시공일괄방식은 전통적 수행방식의 대안으로 점차 선호되고 있다. 1995년 처음 도입된 설계시공일괄방식은 아직까지 많은 문제들을 발생시켜오고 있다 초기 선행연구보고서들은 여러 가지 방법으로 설계시공일괄방식 프로젝트 수행을 향상시키고자 노력해 왔으나, 아직까지는 그다지 큰 영향을 미치지 못하고 있다. 본 연구에서는 설계시공일괄방식 프로젝트 수행을 향상하기 위해 4단계에 걸쳐 설계시공일괄방식 성공모델을 제시하고자 한다. 첫째로 연구를 위한 적절한 모델링 방법을 찾고, 둘째로 설계시공일괄방식의 현황을 분석하여 현황모델을 만든다. 셋째로 현황모델과 기존연구들을 분석하여 문제점 모델을 만든다. 마지막으로 해외 설계시공일괄방식을 분석하여 성공요소와 환경을 찾아 성공적인 설계시공일괄방식의 모델을 구현한다.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1998년도 가을 학술발표대회 논문집 디자인 학 연구
• /
• pp.44-45
• /
• 1998

• 한국디지털건축인테리어학회논문집
• /
• 제5권1호
• /
• pp.1-8
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• 산업공학
• /
• 제18권4호
• /
• pp.485-493
• /
• 2005

In this study, a method that can objectively and systematically design the layout of user interface components was developed. In order to explain its application method, the method was applied to the layout design of facsimile. In particular, in order to validate the suitability of the method, comparison tests were performed for the case of facsimile. Computer simulators for layout design were made using Micromedia Flash and comparison evaluation for an existing layout and a new layout was performed in three aspects. The first comparison method was to measure and compare its movement distance when carrying out a task in two layout models. The second one was to measure and compare users' performance. The last one was to measure and compare users' subjective satisfaction after using two models. As the result, new layout design was better than the existing design in all comparison tests. The movement distance of the new layout design model was shorter than the existing model. And, its performance including task completion time and error frequency was better and users' satisfaction was higher than the existing. In conclusion, the method that was developed in this study can be very effectively used in the layout design of user interface components.

• Structural Engineering and Mechanics
• /
• 제27권6호
• /
• pp.741-771
• /
• 2007

Tests were conducted on two partially pre-stressed concrete solid beams subjected to combined loading of bending, shear and torsion. The beams were designed using the Direct Design Method which is based on the Lower Bound Theorem of the Theory of Plasticity. Both beams were of $300{\times}300mm$ cross-section and 3.8 m length. The two main variables studied were the ratio of the maximum shear stress due to the twisting moment, to the shear stress arising from the shear force, which was varied between 0.69 and 3.04, and the ratio of the maximum twisting moment to the maximum bending moment which was varied between 0.26 and 1.19. The required reinforcement from the Direct Design Method was compared with requirements from the ACI and the BSI codes. It was found that, in the case of bending dominance, the required longitudinal reinforcements from all methods were close to each other while the BSI required much larger transverse reinforcement. In the case of torsion dominance, the BSI method required much larger longitudinal and transverse reinforcement than the both the ACI and the DDM methods. The difference in the transverse reinforcement is more pronounce. Experimental investigation showed good agreement between design and experimental failure loads of the beams designed using the Direct Design Method. Both beams failed within an acceptable range of the design loads and underwent ductile behaviour up to failure. The results indicate that the Direct Design Method can be successfully used to design partially prestressed concrete solid beams which cater for the combined effect of bending, shear and torsion loads.

• 드라이브 ㆍ 컨트롤
• /
• 제12권4호
• /
• pp.8-14
• /
• 2015

A quick-acting hydraulic fuse, which is mainly composed of a poppet, a seat, and a spring, must be designed to minimize the leaked oil volume during fuse operation on a line rupture. The optimal design parameters of a quick-acting hydraulic fuse were searched using the design of experiments method and the complex method. First, the $L_{50}(5^4)$ orthogonal array is used to find the robust minimum point among the 625 points of design variables. The search range can then be narrowed around the robust minimum point. Second, the $L_{25}(5^4)$ orthogonal array is used to obtain the variations of the design variables in the narrowed search range. The variations of design variables are used to set the structure of a polynomial equation representing the leakage oil volume of the quick-acting hydraulic fuse. The least squares method is then applied to obtain the coefficients of polynomial equation. Finally, the complex method is used to find the optimal design parameters where the objective function is described by the polynomial equation.