• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.689-693
• /
• 2023

Domestic bridges with a service life of more than 30 years are expected to account for approximately 54% of all bridges within the next 10 years. As bridges rapidly deteriorate, it is necessary to establish an appropriate maintenance plan. Recent domestic and international research have focused on the integration of BIM to digitize bridge maintenance information and then enhance accessibility and usability of the information. Accordingly, this study developed a BIM-FEM interoperability algorithm for bridge decks to convert maintenance information into data and efficiently manage the history of maintenance. After creating an initial crack BIM based on an exterior damage map, bridge specification and damage information were linked to a numerical analysis that performs damage analysis considering damage scenarios and design loads. The spread of cracks obtained from the analysis results were updated into the BIM. Based on the damage spread information on the BIM, an automated technology was also developed to assess both the current and future condition ratings of the bridge deck. This approach can enable an efficient maintenance of the deck using the history data from bridge inspection and diagnosis as well as future information on cracks and defects. The expected early detection and prevention would ultimately improve the lifespan and safety of bridges.

• Steel and Composite Structures
• /
• v.28 no.3
• /
• pp.289-308
• /
• 2018

Numerous urban seismic vulnerability studies have recognized pounding as one of the main risks due to the restricted separation distance between neighboring structures. The pounding effects on the adjacent buildings could extend from slight non-structural to serious structural damage that could even head to a total collapse of buildings. Therefore, an assessment of the seismic pounding hazard to the adjacent buildings is superficial in future building code calibrations. Thus, this study targets are to draw useful recommendations and set up guidelines for potential pounding damage evaluation for code calibration through a numerical simulation approach for the evaluation of the pounding risks on adjacent buildings. A numerical simulation is formulated to estimate the seismic pounding effects on the seismic response demands of adjacent buildings for different design parameters that include: number of stories, separation distances; alignment configurations, and then compared with nominal model without pounding. Based on the obtained results, it has been concluded that the severity of the pounding effects depends on the dynamic characteristics of the adjacent buildings and the input excitation characteristics, and whether the building is exposed to one or two-sided impacts. Seismic pounding among adjacent buildings produces greater acceleration and shear force response demands at different story levels compared to the no pounding case response demands.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.4
• /
• pp.309-326
• /
• 2011

There have been several milestones in the history of library classification but most of the schemes failed to meet the new challenges in the organisation of information. Dr. S. R. Ranganathan tried to revolutionise the whole thinking on classificatory approach, when he devised the Colon Classification (CC) in 1933. He developed the Colon Classification scheme with a sound theoretical background based on normative principles, Five laws of Library science, canons, etc. One important feature of CC is that, its use is not confined to information storage and retrieval alone. This paper presents an over view of different editions of the CC highlighting the salient features of the editions. Further the implication of Five Laws of Library Science has been described. The authors stressed that the features of such as greater hospitality, specificity and mixed notation has paved the way to design and develop the depth schedules on various micro level subjects and so far about 130 micro schedules have been published. The impressions by the leading LIS professionals during and after Ranganathan's time have been highlighted. The authors expressed the fear that when the library world would see the complete version of the seventh edition of CC? It may be due to lack of institutional support engaging in the research or financial constraints. The authors are of the opinion that any scheme to flourish needs a sound research body to bring out the revised editions as done in the case of Dewey Decimal Classification. The relevance of the CC in the contemporary world of Librarianship is discussed. Finally concludes that CC needs to be resuscitated as it is a precious national heritage; and still a force for the management of libraries.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.11
• /
• pp.13-24
• /
• 2019

The history of tall buildings begins in 1853with the development of elevators. After the Industrial Revolution of the 18th century, the development of high-rise buildings will be carried out in earnest as a means to efficiently use the limited land of cities. The development, which began around Chicago, extended over a long period of time to Asia, maximizing the high competition. However, in the 2000s, not only was it high due to the development of construction and digital technology, but it also became competitive in eco-friendly elements and unstructured forms. High-rise building plans that have gained elemental and morphological diversity are completed by the interrelationships of various plans. Among them, it is important that the core plan has a reasonable approach from the initial planning stage as the basis for the vertical copper plan linking vertically-intensive functions. The cores should be designed to be clear and adequately responsive to changes in the shape of the building. This study aims to provide designers with a reasonable understanding of core planning by identifying core characteristics of irregular high-rise. In particular, we want to analyze the shape of the ground layer core and the relationship between the area and components of the ground layer core. The analysis results are as follows, classified according to the type or use of the building. Of the atypical forms composed of double bending, the TAPER-Curve and TWIST forms are the most distributed, and the plane and core shapes of the ground floor are the most commonly used. Based on the analysis of the validity of the ground floor cores by shape of the cores, the most commonly used forms for core shapes in the planning of the atypical high-rise are square, circular and Oval, and the most efficient oval cores and relatively inefficient ones when planned.

• The Journal of Information Systems
• /
• v.31 no.1
• /
• pp.289-304
• /
• 2022

Purpose The development of the network and mobile industries has induced companies to invest in information systems, leading a new industrial revolution. The Journal of Information Systems, which developed the information system field into a theoretical and practical study in the 1990s, retains a 30-year history of information systems. This study aims to identify academic values and research trends of JIS by analyzing the trends. Design/methodology/approach This study aims to analyze the trend of JIS by compounding various methods, named as TLS mining analysis. TLS mining analysis consists of a series of analysis including Term Frequency-Inverse Document Frequency (TF-IDF) weight model, Latent Dirichlet Allocation (LDA) topic modeling, and a text mining with Semantic Network Analysis. Firstly, keywords are extracted from the research data using the TF-IDF weight model, and after that, topic modeling is performed using the Latent Dirichlet Allocation (LDA) algorithm to identify issue keywords. Findings The current study used the summery service of the published research paper provided by Korea Citation Index to analyze JIS. 714 papers that were published from 2002 to 2012 were divided into two periods: 2002-2011 and 2012-2021. In the first period (2002-2011), the research trend in the information system field had focused on E-business strategies as most of the companies adopted online business models. In the second period (2012-2021), data-based information technology and new industrial revolution technologies such as artificial intelligence, SNS, and mobile had been the main research issues in the information system field. In addition, keywords for improving the JIS citation index were presented.

• Earthquakes and Structures
• /
• v.21 no.5
• /
• pp.515-530
• /
• 2021

In a tall reinforced concrete (RC) core wall system subjected to strong ground motions, inelastic behavior near the base as well as mid-height of the wall is possible. Generally, the formation of plastic hinge in a core wall system may lead to extensive damage and significant repairing cost. A new configuration of core structures consisting of buckling restrained braced frames (BRBFs) and RC walls is an interesting idea in tall building seismic design. This concept can be used in the plan configuration of tall core wall systems. In this study, tall buildings with different configurations of combined core systems were designed and analyzed. Nonlinear time history analysis at severe earthquake level was performed and the results were compared for different configurations. The results demonstrate that using enough BRBFs can reduce the large curvature ductility demand at the base and mid-height of RC core wall systems and also can reduce the maximum inter-story drift ratio. For a better investigation of the structural behavior, the probabilistic approach can lead to in-depth insight. Therefore, incremental dynamic analysis (IDA) curves were calculated to assess the performance. Fragility curves at different limit states were then extracted and compared. Mean IDA curves demonstrate better behavior for a combined system, compared with conventional RC core wall systems. Collapse margin ratio for a RC core wall only system and RC core with enough BRBFs were almost 1.05 and 1.92 respectively. Therefore, it appears that using one RC core wall combined with enough BRBF core is an effective idea to achieve more confidence against tall building collapse and the results demonstrated the potential of the proposed system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.6
• /
• pp.1-14
• /
• 2007

Optimal design method of nonlinear damping system for seismic response control of adjacent structures is studied in this paper. The objective functions of the optimal design are defined by structural response and total amount of the dampers. In order to obtain a solution minimizing two mutually conflicting objective functions simultaneously, multi-objective optimization technique based on genetic algorithm is adopted. In addition, stochastic linearization method is embedded into the multi-objective framework to efficiently estimate the seismic responses of the adjacent structures interconnected by nonlinear hysteretic dampers without performing nonlinear time-history analyses. As a numerical example to demonstrate the effectiveness of the proposed technique, 20-story and 10-story buildings are considered and MR dampers of which hysteretic behaviors vary with the magnitude of the input voltage are considered as nonlinear hysteretic damper interconnecting two adjacent buildings. The proposed approach can provide the optimal number and capacities of the MR dampers, which turned out to be more economical than the uniform distribution system while maintaining similar control performance. The proposed damper system is verified to show more stable performance in terms of the pounding probability between two adjacent buildings. The applicability of the proposed method to the design problem for optimally placing semi-active control system is examined as well.

• The Journal of Information Systems
• /
• v.30 no.1
• /
• pp.151-177
• /
• 2021

Purpose This paper aims to improve management performance by effectively responding to production needs and reducing inventory through synchronizing production planning and procurement in the aviation industry. In this study, the differences in production planning and execution were first analyzed in terms of demand, supply, inventory, and process using the big data collected from a domestic aircraft manufacturers. This paper analyzed the problems in procurement and inventory management using legacy big data from ERP system in the company. Based on the analysis, we performed a simulation to derive an efficient procurement and inventory management plan. Through analysis and simulation of operational data, we were able to discover procurement and inventory policies to effectively respond to production needs. Design/methodology/approach This is an empirical study to analyze the cause of decrease in inventory turnover and increase in inventory cost due to dis-synchronize between production requirements and procurement. The actual operation data, a total of 21,306,611 transaction data which are 18 months data from January 2019 to June 2020, were extracted from the ERP system. All them are such as basic information on materials, material consumption and movement history, inventory/receipt/shipment status, and production orders. To perform data analysis, it went through three steps. At first, we identified the current states and problems of production process to grasp the situation of what happened, and secondly, analyzed the data to identify expected problems through cross-link analysis between transactions, and finally, defined what to do. Many analysis techniques such as correlation analysis, moving average analysis, and linear regression analysis were applied to predict the status of inventory. A simulation was performed to analyze the appropriate inventory level according to the control of fluctuations in the production planing. In the simulation, we tested four alternatives how to coordinate the synchronization between the procurement plan and the production plan. All the alternatives give us more plausible results than actual operation in the past. Findings Based on the big data extracted from the ERP system, the relationship between the level of delivery and the distribution of fluctuations was analyzed in terms of demand, supply, inventory, and process. As a result of analyzing the inventory turnover rate, the root cause of the inventory increase were identified. In addition, based on the data on delivery and receipt performance, it was possible to accurately analyze how much gap occurs between supply and demand, and to figure out how much this affects the inventory level. Moreover, we were able to obtain the more predictable and insightful results through simulation that organizational performance such as inventory cost and lead time can be improved by synchronizing the production planning and purchase procurement with supply and demand information. The results of big data analysis and simulation gave us more insights in production planning, procurement, and inventory management for smart manufacturing and performance improvement.

• Korean Journal of Health Education and Promotion
• /
• v.20 no.2
• /
• pp.35-61
• /
• 2003

Background： The purpose of this study was to develop a structured and individualized smoking prevention program for adolescents by utilizing a multimedia computer-assisted instruction model and to empirically assess its effect. Method： For the purpose of this study, a guide book of smoking prevention program for middle and high school students was developed as the first step. The contents of this book were summarized and developed into an actual multimedia CAI smoking prevention program according to the Gane ＆ Briggs instructional design and Keller's ARCS motivation design models as the second step. At the final step, the short-tenn effects of this program were examined by an experiment. This experiment were made for middle school and high school students and the quasi experimental design was the pretest - intervention - posttest. The measured data was attitude, belief, and knowledge about smoking, interest in the program, and learning motivation. Result： The results of this study were as follows： First, the guide book of a smoking prevention program was developed and the existing literature on adolescent smoking was analyzed to develop the content of the guide book. Then the curriculum was divided into three main domains on tobacco and smoking history, smoking and health, adolescent smoking and each main domain was divided into sub-domains. Second, the contents of the guide book were translated into a multimedia CAI program of smoking prevention througn Powerpoint software according to the instructional design theory. The characteristics of this program were interactive, learner controllable, and structured The program contents consisted of entrance(5.6％), history of tobacco(30％), smoking and health(38.9％), adolescent smoking(22.2％), video(4.7％), and exit(1.6％). Multimedia materials consisted of text(121), sound and music, image(still 84, dynamic 32), and videogram(6). The program took about 40 minutes to complete. Third, the results on analysis of the program effects were as follows： 1) There was significant knowledge increase between the pre-test and post-test with total mean difference 3.44, and the highest increase was in the 1st grade students of high school(p＜0.001). 2) There was significant decrease in general belief on smoking between the pre-test and post-test with total mean difference 0.28. In subgroup analysis, the difference was significantly higher in the 1st grade of high school (p<0.001), low income class (p<0.001), and daily smokers (p<0.01). 3) There was no significant difference in attitudes on his personal smoking between the pre-test and post-test. 4) The interest in the program seemed to lower as students got older. The score of motivation toward this prevention program was the highest in the middle school 3rd grade. Among sub-domains of motivation, the confidence score was the highest. Conclusion： To be most effective, the smoking prevention program for adolescents should utilize the most up-to-date and accurate information on smoking, and then instructional material should be developed so that the learners can approach the program with enjoyment. Through this study, a guide book with the most up-to-date information was developed and the multimedia CAI smoking prevention program was also developed based on the guide book. The program showed positive effect on the students' knowledge and belief in smoking.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.8 no.2
• /
• pp.132-146
• /
• 2001

Purpose: This study was to analyze the trends and content of all the research (171 research papers) published in the Journal of Fundamentals of Nursing from 1994, when it began to 2000 using an objective tool developed by the researches, and to identify the direction for the future research in Fundamentals of Nursing. Method: Research published in the Journal of Fundamentals of Nursing from 1994 were reviewed. Result: Most of research (94.2%) was non-degree based and funded research was very limited. The average number of researchers per research study was 2.2 and collaborative research has been gradually increasing. The total number of key words was 331 and the average was 2.6 per research. The major key words were not different from other nursing departments and included home care nursing (10 times), health promotion (8 times), self-care (7 times). self-efficacy (7 times), and homo-dialysis (6 times). Eighty seven percent of the research was quantitative research. and there were very few qualitative studies. Considering theory level, it was found that 40% were factor related research For study design, non-experimental studies were most frequent (66%), and the rate, especially of surveys, has remarkably decreased. Selection of subjects by convenience sampling, was most frequent and there were very few studies that provided the rationale for the calculation of sample size. The major subjects of study were patients (44.8%) with various diagnoses. The subjects usually gave oral consent to take part in that study. Giving information (46.9%) and exercise (26.5%) were common nursing interventions, and physiological indices (16.5%). vital signs (10.3%), physical functioning (8.2%), level of knowledge/skill (7.2%) and level of activity (6.2%) were frequently measured as outcome. Variables questionnaires were the major approach used to collect data, and 57.8% of the research provided the Cronbach alpha to guarantee internal consistency of study instruments. Data were analyzed with computerized statistical packages using, ANOVA (42.0%), T test(39.5%), and chi-square test. For the last seven years, nursing research in Fundamentals of Nursing has gradually improved in both quantify and quality. Conclusion: It was difficult to find any uniqueness or difference compared to other departments of nursing. In fact, because the history of the Journal of Fundamentals of Nursing is rather short, we can expect that there will be further improvement in qualify and content in the future.