• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.166-171
• /
• 2001

Copper bus-bar is made by drawing process and used in many part of industry. When design drawing die for copper bus-bar, design factor is focused on the deformation of die-land by drawing force and shrink fit. In this paper, to determine shrink fit value is analyzed by automatic shrink fit analysis program, APDL/UIDL language in a commercial FEM package, ANSYS, has been developed that enables optimal design of the dies taking into account the elastic deflections generated in shrink fitting the die inserts and that caused by the stresses generated in the process and by using DEFORM software for drawing process analysis. This data can be processed as load input data for a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the drawing die design. The stress analysis of the dies is used to determine optimized dimension of die-land.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.7-10
• /
• 2008

Restriking method is to add to process in order to get the correct size and high precision accuracy of product which is formed in pre-process. This method is widely used at bending work and drawing work. Restriking die is particularly design and used as restriking process is performed. Therefore, production cost is increasing as one process or a two process are added. In this paper, punches and die block of square shell drawing die which could be performed drawing work and restriking process by using only one die are designed in order to solve these factors. The structure of sectional die which can integrate drawing die and restriking die was developed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.105-108
• /
• 2000

Finite element analysis of a multi-stage deep drawing process is carried out for the die design of rectangular cup drawing with the large aspect ratio. Simulation is performed for thorough investigation of unfavorable mechanisms in the initial design. The analysis reveals that the difference of the drawing ratio and the irregular contact condition produces non-uniform metal flow to cause wrinkling and severe extension. In this paper, the modification guideline is proposed in the design of the process and the tool shape. The analysis result confirms that the modified design not only improves the quality of a deep-drawn product but also reduces the possibility of failure.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.95-98
• /
• 1999

In this study, a method to find the optimal intermediate die geometry for the multi-stage drawing process for the rectangular rod from a round bar is proposed and a program using the proposed method is developed. On the stage of the design of the intermediate die geometry, the virtual die was constructed using the initial billet as a inlet of the drawing die and the final product as a exit of that and the virtual die was divided by the number of pass. Divided die was transformed into the rectangular one which is the intermediate die geometry for the multi-stage rectangular drawing process. In order to verify the application of the proposed method on the real industrial product, the drawing of the rectangular rod from a round which composed two stage has been performed and simulated by the three dimensional rigid plastic finite element method.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1996년도 디자인 학 연구 제 4회 춘계학술연구발표대회 개요 집
• /
• pp.64-65
• /
• 1996

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2001년도 Bulletin of The 5th Asian Design Conference International Symposium on Design Science
• /
• pp.59.1-59
• /
• 2001

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.600-603
• /
• 2000

In the high carbon steel wire drawing process, the wire temperature increases as the drawing speed is faster in order to increase the production rate in the shop floor. The rapid temperature rise causes the wire fracture in the dry wire drawing process. So, in this paper, the isothermal pass schedule program, which includes the calculation method of wire temperature at each pass, is proposed to prevent the wire fracture due to the temperature rise. Using the isothermal pass schedule program, it is newly proposed the pass schedule design system that prevents the cup-cone defects, improves the elongation of the final products and assures further deformation. As a result, the temperature rise of the wire was decreased and the production rate of the final product is remarkably grown up according to the increase of the final drawing speed than that of the conventional process. Also, the proposed pass schedule design system could give a useful information to the process designer who would design the high carbon steel wire drawing process.

• 한국조경학회지
• /
• 제28권6호
• /
• pp.16-28
• /
• 2001

The purpose of this study is to arrange the terminology of the drawings in Chosun Dynasty, and to investigate the characteristics of drawings after the middle of Chos n Dynasty. This study is based on the and analysis of historic documents and drawings including drawings from China and Japan. In order to accomplish this, the drawings for the process of design were studied first, and the techniques of drawing were studied next in comparison with Japanese drawing techniques. Lastly, the technicians of drawing were studied. The results of this study were as follows; 1) Though the procedures of design Choson dynasty were not divided into planning, designing, construction and maintenance just like those of modern society, a variety of drawings in that time were used in each level. 2) The drawings in Choson Dynasty ere divided into Tohyong and Tosol, and mostly, those for design and construction were Tohy ng. 3) Based on the interpretation of Japanese drawings, several suggestions were presented to solve the questions of the drawing techniques for design and construction. 4) The technicians of drawing were the painters who were trained in a government organization in charge of royal paintings. In the future, research of this area should be continued in to deepen study on drawings as historical materials. This research provides meaningful of guidance in the analysis of historic drawing paintings.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1596-1606
• /
• 2006

There has been more increased the development of 3D technique since many 3D contents of 3D graphic model, 3D mobile/computer game, and 3D CAD have been serviced in Web or industry fields. Therefore, the watermarking system is more required to protect the copyright for 3D contents. Currently there has been researched about the watermarking for 3D graphic model of mesh or NURBS. However, watermarking technique based on CAD design drawing leaves something to be desired yet. This paper proposed the watermarking technique for 3D CAD design drawing using Line and Arc components. After drawing out Line and Arc components from designed drawing, we embed the watermark into both the length of Line component and the radius of Arc component. Experimental results verified that the proposed algorithm satisfies the transparency about watermarked drawing and also has the robustness against several attacks by using public CAD tool.

• 품질경영학회지
• /
• 제48권3호
• /
• pp.381-393
• /
• 2020

Purpose: The purpose of this study was to find useful solutions by analyzing causes and results about defects on mechanical drawing notes and provide an automated tool with solutions to mechanical engineers. Methods: The collected data for defects on mechanical drawing notes were from ongoing development and mass production projects. Various measurement methods were used based on the Lean 6 Sigma analysis such as Process analysis, C&E diagram and some statistical analysis. Results: The results of this study are as follows; The results of the Lean 6 Sigma analysis, the validity of the selected indicators for improving drawing notes quality was verified through the verification of cause variables. The strategy established to improve the mechanical drawing notes was reflected as an automated program, and the defects were within a manageable range and achieved target Sigma level. Conclusion: Through the application of the "Mechanical drawing notes automation tool", it is expected to resolve the "Voice of Customer, VOC" and "Voice of Business, VOB".