• The KSFM Journal of Fluid Machinery
• /
• v.13 no.1
• /
• pp.35-41
• /
• 2010

Experimental study on the flow field inside the nozzle for radial turbine was performed. At design point, the pressure is high and the Mach number is low at the pressure side of the nozzle inlet semi-vaneless space as the flow turns through the nozzle vanes. As the flow accelerates through the nozzle passage to the throat the pressure level at the pressure and suction sides becomes similar. The flow continued accelerating from the throat to the inlet of turbine wheel and the pressure field became uniform in the circumferential direction in the vaneless space. In high expansion ratio condition, strong favorable pressure gradient band region occurred just after the throat in the semi-vaneless space in the circumferential direction and the pressure became uniform in the circumferential direction after this band. In low expansion ratio condition, core flow acceleration is dominant after the throat and this non-uniform pressure field reached to the inlet of turbine wheel.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1486-1495
• /
• 2019

Dealing with the DC link fault poses a technical problem for an HVDC based on a modular multilevel converter. The fault suppressing mechanisms of several sub-module topologies with DC fault current blocking capacity are examined in this paper. An improved half-bridge sub-module topology with double direction control switch is also designed to address the additional power consumption problem, and a sub-module topology called hybrid double direction blocking sub module (HDDBSM) is proposed. The DC fault suppression characteristics and sub-module capacitor voltage balance problem is also analyzed, and a self-startup method is designed according to the number of capacitors. The simulation model in PSCAD/EMTDC is built to verify the self-startup process and the DC link fault suppression features.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.4
• /
• pp.80-86
• /
• 2021

Plastics are widely used in mechanical and other fields due to their light weight, design flexibility, and molding processability. In processing plastics, defective products are mixed and reprocessed to improve production efficiency and reduce costs. In this study, an experiment was conducted to confirm the coefficient of thermal expansion of HDPE during this reprocessing. The coefficient of thermal expansion was measured at different measurement directions and heating rates. As a result, we observed that the coefficient of thermal expansion in the direction perpendicular to the injection direction is greater than that in the horizontal direction.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1389-1392
• /
• 2004

정보통신 및 인터넷의 급속한 발전으로 전자원문 서비스 등 웹 서비스가 활발하게 이루어지고 있으나, 기존 웹 서비스에 대한 연구는 웹 서비스를 차별화하기 위해 HTTP의 속도지연 문제해결이나 서비스 차별화 방안에 대해 이루어지고 있다. 그러나, 타 시스템의 웹 서비스와 연계시 해당 웹 문서에 대한 제어권 확보에 관한 연구는 미미하다. 따라서, 본 논문에서는 타 시스템의 웹 문서에 대해 제어권 확보를 위해 Re-Direction Agent를 활용하여 해외전자원문 연계시스템을 구현하고자 한다.

• The Journal of Information Systems
• /
• v.30 no.1
• /
• pp.105-121
• /
• 2021

Purpose Today, through digital services, many people enjoy a conveient and comfortable life. Nevertheless, it is easy to find people in our daily lives who are buried in work without any payment that we did not do before digital services. Such un-payed works under digital environment are called digital shadow works. The purpose of this study is to classification and dynamics of digital shadow works and to suggest research direction. Design/methodology/approach Based on two dimension, voluntary participation ('should' type and 'want' type) and work orientation (management-operation), digital shadow works were classified into four categories - chore, makeup, routine, and quest. Findings In digital shadow work there are four types of dynamics - routine and quest, makeup and chore, makeup and quest, and quest and actions in offline. According to the classification and analysis of dynamics, three research directions in digital shadow work are suggested and discussed- digital shadow works operation mechanism considering dynamics, expansion of existing user theories based on survey method by digital shadow works and social influences by digital shadow works.

• Archives of design research
• /
• v.20
• /
• pp.25-36
• /
• 1997

Design style is studied to examine the design essence more clearly which is revealed as a formative substance. First of all, every effort can be made to understand the peculiar characteristic of design style by considering the linguistic source and meaning of design style. On the basis of this, picturesque style, mechanical style and expressive style are searched to establish the types of design style, inspect the every style's characteristic and focus on revealing the relations between the creation of design value and the style. Finally, changing factors of design style is researched to suggest the effect and direction of design development.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.237-241
• /
• 2007

Artificial environments and spaces developed in 20th century provided conveniences and comforts and developed spatial thoughts of interior design. But it caused significant environmental estrangement due to environmental disruption and materialism. This caused raising necessity of emotional design in human life spatial design as liberation of human nature is discussed and interest in emotion among human natures is being enhanced. This study manages how emotional design is expressed in basic area of human, residential area. Emotional design is proceeding to the direction designing interface between human and environment considering human physical and psychological characteristics focused on correlation between human and interior space. Therefore through this study, meanings and effects of design considering user emotions are reviewed to materialize expressing factors for combining into actual design.

• International Journal of Costume and Fashion
• /
• v.15 no.2
• /
• pp.63-77
• /
• 2015

By means of statistical analysis and module concept, this paper investigated the current situation of high school girl's uniform and put forward its improved design and database establishment. Combined with the survey data, the future design direction and trend of the high school girls' uniform were proposed. By using modular design concept, the uniform is divided into five modules, and a style database has been built. Meanwhile, the parametric pattern database has been completed by using garment CAD system, based on the style database above, which has 42,336 possibilities to assemble a pair of school uniform. Combining with digital sewing techniques and by using computerized embroidery machine, the personalized design of high school girl's summer uniform has been realized. And two simulated case have been given for examples to prove its feasibility. The idea of modular design and parametric design method proposed in this study offer references for establishing the modular design database and parametric pattern database for other types of school uniform and are of relatively high practical and theoretical value.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.664-672
• /
• 2009

In this paper we propose an on-glass antenna which consists of conducting dual center striplines and multi-loaded striplines. Multi-loaded striplines and dual center lines were employed for achieving a broad matching bandwidth and improving a vertical radiation gain, respectively. The detail design parameters were determined using the Pareto genetic algorithm with an full wave EM simulator. The optimized design was built and installed on a commercial vehicle, and the antenna performances such as the return loss and the radiation gain were measured in a semi-anechoic chamber. The measurement results showed the matching bandwidth($S_{11}$<-3 dB) of about 49 % in the T-DMB frequency band, the vertical gain of about -3 dBi along the bore-sight direction, and the average gain of about -10 dBi along the azimuth direction.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1322-1329
• /
• 2004

End-milling has been used widely in industrial system because it is effective to a material manufacturing with various shapes. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in precision machine part and electronic part. The optimum mechanical vibration of main spindle, surface roughness and cutting temperature have an effect on end-milling condition such as, cutting direction, revolution of spindle, feed rate and depth of cut, etc. Therefore, this study carried to decide the working condition for optimum mechanical vibration of main spindle, surface roughness and cutting temperature using design of experiments, ANOVA and characteristic function. From the results of experimentation, mechanical vibration has an effect on revolution of spindle, radial depth of cut, and axial depth of cut. The surface roughness has an effect on cutting direction, revolution of spindle and depth of cut. And then the optimum condition used design of experiments is upward cutting In cutting direction, 600 rpm in revolution of spindle, 240 mm/min in feed rate, 2 mm in axial depth of cut and 0.25 mm in radial depth of cut. By design of experiments and characteristic function, it is effectively represented shape characteristics of mechanical vibration, surface roughness and cutting temperature in end-milling.