• Journal of Sasang Constitutional Medicine
• /
• v.33 no.1
• /
• pp.90-101
• /
• 2021

Objectives The purpose of this study was to evaluate intervention studies on Sasang Constitutional diet (SCD) through the checks of Participant, Intervention, Comparison, and Outcome (PICO) Methods Randomized controlled trial (RCT) and non-randomized study for intervention (NRSI) about SCD were searched in 4 Korean core databases and other sources, and then PICO was checked. Results 1. Total 10 studies were conducted with 1 RCT and 9 NRSIs. 2. Participants were people with no specific disease, or patients with essential hypertension, hyperlipidemia, obesity, or stroke with diabetes or hyperlipidemia. Most studies were conducted on groups of various Sasang Constitutional types except Taeyangin. 3. Two studies provided participants with meals and exercise. Three studies, instead of providing meals directly, taught participants how to eat SCD on their own. 4. NRSIs have tested the effectiveness of various outcome measures without the presentation of primary outcome, and then concluded that all outcomes were ineffective or some are effective. 5. There was no mention of adverse events. In most studies, a single doctor of Korean medicine diagnosed Sasang Constitution the QSCC II questionnaire. The intervention period ranged from three weeks to three months, and recent studies have conducted interventions for 12 weeks. Conclusions Intervention studies about SCD which were conducted so far have shown problems on the study design of PICO items. The study design and implementation that carefully consider how to maintain similarity between groups, minimize the risk of bias, set primary outcome measure, and control the diet are required.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.69-83
• /
• 2013

Clothes show not just the different social status of people, but the ideology and value of former society through pattern, colour, materials, shapes, etc. The purpose of this article is to fill the academic blank of this part by researching the pattern of fabric design in Jing Pai(Beiing style) and Hai Pai(Shanghai style) cheong-sam during the period of the Republic of China. The contrastive analysis of regional pattern between Jing Pai and Hai Pai cheong-sam expect to provide the theoretical basis for the former fashion designers and scholars. There are three approaches in the article: Data collection method, comparison method and Combining theory with practice method as film. Regarding components of pattern, both Jing Pai and Hai Pai cheong-sam have mostly single or composite pattern like plants. Further the most of Jing Pai cheong-sam pattern is traditional flower pattern. But Haipai cheong-sam patterns have some western flower pattern. Beside that, it have some geometry pattern. Regarding arrangement of the pattern, both cheong-sams have scattered dot style, the border style, and pictures style. But continuous type of Jing Pai cheong-sam is less while Hai Pai cheong-sam is the most. Comparing Jing Pai cheong-sam color of patterns in "Moment in Peking" is unadorned and types are simple as chinese traditional clothes; However, "In the Mood for Love" introduces us various material colors, new types of patterns and extraneous characteristic geometry patterns of Hai Pai cheong-sam. Generally speaking, the main characteristic of Jing Pai cheong-sam is traditional and conservatism. It keeps Chinese traditional pattern and culture to the most extent. However, Hai Pai cheong-sam are confluent and open with absorbed external culture and techniques which are endowed new artistic color.

• Journal of Fashion Business
• /
• v.19 no.1
• /
• pp.1-16
• /
• 2015

Universities in Korea are already saturated with fashion-related majors, and graduates are having difficulties getting jobs. For this reason, Korean universities should educate students with a competitive curriculum. The purpose of this study was to analyze and compare the curricula of fashion-related majors at universities in Korea and the United States (U.S.) in order to help develop fashion-related curricula at the universities in Korea. The curricula of the 52 majors in 47 Korean universities and the 62 majors in 62 U.S. universities were analyzed. Data was analyzed using MS Excel 2010 and R 3.0.1.; the statistical significance was determined at ${\alpha}$=0.05. There were five main differences between fashion-related majors in Korean universities and those in the U.S. universities: 1) The subjects of the U.S. were more diverse and more business-oriented than those of Korea, but the universities of Korea had more design subjects. 2) The U.S. more often utilized computer technology, than Korea, in the field of fashion design. 3) The U.S. offered more theoretical courses, than Korea, in the field of fashion materials. 4) In the clothing construction field, the U.S. offered more apparel design and technical design than Korea. 5) The U.S. mainly educated on retailing and buying subjects while Korea mainly educated on fashion marketing subjects within the fashion business field.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.757-764
• /
• 2012

This research is for comparison of test statistics for homogeneity when the data is collected based on complex sample design. The survey data based on complex sample design does not satisfy the condition of independency which is required for the standard Pearson multinomial-based chi-squared test. Today, lots of data sets ara collected by complex sample designs, but the tests for categorical data are conducted using the standard Pearson chi-squared test. In this study, we compared the performance of three test statistics for homogeneity between two populations using data from the 2009 customer satisfaction evaluation survey to the service from Gyeongsangnam-do regional offices of education: the standard Pearson test, the unbiasedWald test, and the Pearsontype test with survey-based point estimates. Through empirical analyses, we fist showed that the standard Pearson test inflates the values of test statistics very much and the results are not reliable. Second, in the comparison of Wald test and Pearson-type test, we find that the test results are affected by the number of categories, the mean and standard deviation of the eigenvalues of design matrix.

• Earthquakes and Structures
• /
• v.4 no.6
• /
• pp.587-606
• /
• 2013

The given paper presents a new approach in design of seismic isolation systems of base isolated buildings. The idea is to install not one big size rubber bearing under the columns and/or shear walls, or one by one with certain spacing under the load-bearing walls, but to install a group/cluster of small size bearings, in order to increase the overall effectiveness of the isolation system. The advantages of this approach are listed and illustrated by the examples. Also the results of analyses of some buildings where the approach on installation of clusters of rubber bearings was used in their isolation systems are given for two cases: i) when the analyses are carried out based on the provisions of the Armenian Seismic Code, and ii) when the time history analyses are carried out. Obtained results are compared and discussed. Paper also presents, as an example, detailed analysis and design of the 18-story unique building in one of the residential complexes in Yerevan. Earthquake response analyses of this building were carried out in two versions, i.e. when the building is base isolated and when it is fixed base. Several time histories were used in the analyses. Comparison of the obtained results indicates the high effectiveness of the proposed structural concepts of isolation systems and the need for further improvement of the Seismic Code provisions regarding the values of the reduction factors. A separate section in the paper dedicated to the design of high damping laminated rubber-steel bearings and to results of their tests.

• The Korean Journal of Applied Statistics
• /
• v.32 no.1
• /
• pp.1-13
• /
• 2019

An adaptive seamless Phase II/III clinical trial design enables a reduction in the sample size (in comparison to a conventional design) that also shortens the clinical development time. It is also very effective in clinical trials since it can have higher statistical power than Phase III alone. In this study, we use extensive simulation studies to compare several multiple hypothesis testing methods that can help select the best doses in a Phase II study along with several methods to combine p-values of the Phase II and Phase III study.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.127-132
• /
• 2002

Recent deepwater offshore structures in Gulf of Mexico utilize butt welded tubular joints. Application of welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical because the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimating the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves specified in the codes and standards. Applying the stress concentration factor of the welded structure to S-N approach often results in very conservative assessment because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fracture mechanics and fitness for service (FFS) technology have been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves to be used and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. An attempt was made to develop set of S-N curves based on fracture mechanics approach by considering non-uniform stress distribution and a threshold stress intensity factor. Series of S-N curves generated from this approach were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02"). Similar comparison with API X′ was made for tubular joint.. These initial crack depths are larger than the limits of inspection by current Non-destructive examination (NDE) means, such as Automatic Ultrasonic Inspection (AUT). Thus a safe approach can be taken by specifying acceptance criteria that are close to limits of sizing capability of the selected NDE method. The comparison illustrates conservatism built into the S-N design curve.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.7-13
• /
• 2012

Objective: This paper discussed the characteristics of service design process by comparing with product design process. Background: Service design has different design outcomes, project participants, and design constraints than product design. Method: The comparison took two perspectives: one was shorter-term, design process of a service, and the other was longer-term, process of service development. Results: It was discussed that service design process is similar in overall, but has four differences. First, the role of design is required earlier and longer in the process, which means service designers need to participate from the begging of the project to service operation. Thus service designers are required to have holistic viewpoint of the project. Second, service design requires many design expertise thus collaboration needs to be well defined and managed throughout the process. Third, since service provider has limited resources, regulations, and market competition, some service features cannot be provided. Service designers are required to know both customers' needs and functional constraints. Last, service design is highly coupled with service operation. Designing and providing service happens at the same time and evolves over time. Conclusion: Consequently it was asserted that the role of designers in service design is essential for success. In specific, the role of service design architect, who manages design process and design outcomes, is a new and important role in service design project.

• Steel and Composite Structures
• /
• v.5 no.2_3
• /
• pp.203-233
• /
• 2005

This paper presents the findings of a design development project for perforated beams fully integrated with building services. A unified design approach for both steel and composite beams with large rectangular web openings is proposed which is based on plastic design methods and formulated in accordance with analytical structural design principles. Moreover, finite element models are established after careful calibration against test data, and comparison on the predicted ultimate loads of two composite beams with rectangular web openings from the finite element models and the proposed design method is also presented. It is demonstrated that the proposed design method is able to predict the ultimate loads of composite beams with rectangular web openings against 'Vierendeel' mechanism satisfactorily.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.4
• /
• pp.53-58
• /
• 2003

Design of the corrugated watertight bulkhead for a bulk carrier is principally determined by the permissible limit of Classification requirements. As the weight of upper and lower stool has considerable portion of the total weight of the transverse bulkhead, optimum design including the stool geometry and size will play an important role on economic shipbuilding. The purpose of this study is focused on the minimization of steel weight using the design variables, which are the shape and the size of the corrugation as well as the upper and lower stools. Discrete variables are used as design variables for the practical design. In this study, the evolution strategies (ES), which can highly improve the possibility of leaching the global minimum point, are selected as an optimization method. Usefulness of this study is verified by comparison with the proven type ship design. As objective function, total weight of the transverse bulkhead including the upper and lower stools is used.