• Geomechanics and Engineering
• /
• v.30 no.5
• /
• pp.461-469
• /
• 2022

One of the most important factors that should be considered for using any ground improvement technique is the stability of stabilized soil and the durability of the provided solution for getting the required engineering properties. Generally, most of the earth structures that are constructed on clayey soils are exposing movements due to the long periods of drying or wetting cycles. Over time, environmental changes may result in swells or settlements for these structures. In order to mitigate this problem, this research has been performed on mixtures of high plasticity clay with traditional additives such as lime, cement and non-traditional additives such as polypropylene fiber. The purpose of the research is to assess the most appropriate ground improvement technique by using commercially available additives for resisting the developed desiccation cracks during the drying process and resisting the volume changes that may result during wet/dry cycles as an attempt to simulate the changes of environmental conditions. The results show that the fiber-reinforced samples have the lowest volumetric deformation in comparision with cement and lime stabilized samples, and the optimum fiber content is identified as 0.38%. In addition, the desiccation cracks were not visible on the samples' surface for both unreinforced and chemically stabilized samples. Regarding cracks resistance resulting from the desiccation process, it is observed, that the resistance is connected with the fiber content and increases with the increase of the fiber inclusion, and the optimum content is between 1% and 1.5%.

• Fisheries and Aquatic Sciences
• /
• v.4 no.4
• /
• pp.257-260
• /
• 2001

The effects of light, desiccation and salinity on the discharge of spores in Korean agarophyte, Gracilaria verrucosa were studied. Among the examined factors, light after darkness was the most effective for spore discharge. The maximum release of tetraspores was induced at 24 h after the treatment. Desiccation also seems to be conductive to the release of tetraspores. However, its effect, as in treatment of distilled water for salinity, was hardly found in induction of carpospore discharge. This may suggest that spore discharge in this alga is primarily related with photoperiodic rhythm. Also it appears that the amount of light energy received by fertile thalli also significantly affects to the spore release, considering relationship between the amount of the discharged spores and the elapsed time after treatment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.301-308
• /
• 1999

With the shortage of the land and NIMBY syndrome, it is issued recently that the capacity of waste-landfill site is needed though the decreasing tendency of waste landfill. From this point, the stability is the most essential problem in the landfill that will be constructed. Advanced design and construction are most important for that. In this paper, for the study of desiccation, dry-shrinkage crack from drying and chemical reaction in cement hydration, which is occurred when the surface layer stabilization method is applied in wast landfill, laboratory test of the ground and specimen according to the mixture ratio of stabilizer is performed. From the result, it is notified that the uni-axial strength increases with the stabilizer, but dry-shrinkage increases too, therefore, it is important and the goal of this study to find the optimal mixture ratio of each stabilizer. Analysis of variance for regression with acting variables is performed to find optimal mixture ratio of each stabilizer.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.499-506
• /
• 2004

The use of dredged soft marine clay is increasing due to a shortage of coarse material available. This paper presents a stabilization method that can increase shear strength of the surface layer of a dredged clay deposit at dates much earlier than usual. The desiccation of the upper soft 1-2m layer can be accelerated by interrupting water seeping from its bottom with impervious geotextile. Just below the geotextile, enough pervious material is provided so that the underlying deposit can be drained through it. This scheme is proved to be effective through theoretical analysis.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.591-598
• /
• 2000

In the present study, the variation of settlement, pore water pressure and undrained shear strength through model tests were measured. Also, the variation of water content, unit weight and shear strength by the vane shear tests were observed. In this study, appropriate deposit time of construction equipments used in treatment of hydraulic fills is determined from the prediction curve of increased shear strength in dredged fills.

• Spatial Information Research
• /
• v.23 no.6
• /
• pp.31-41
• /
• 2015

This research is primarily intended to explore a novel way to monitor desiccation of inland wetland by combining MNDWI (Modified Normalized Difference Water Index) and NDVI (Normalized Difference Vegetation Index). The changes for vegetation and water condition on Upo Wetland located at southeastern Korea were investigated by MNDWI and NDVI derived from 2002, 2010 and 2015 Landsat data. The integrated use of MNDWI and NDVI made it possible to identify area-wide vegetation cover changes and to assess water storage changes on multi-annual time scales simultaneously. Comparing MNDWI with NDVI reveals the quantitative evidences for anthropogenic and environmental influences (such as road, building, water) causing an accelerated wetland desiccation. In fact, our monitoring approach raises critical issues regarding the hydrological cycle and its inter-annual changes for inland wetland under threat of drying up and highlights the important role of MNDWI and NDVI integration for any urgent or long-term treatment plan. This research presents scientific and objective evidences to support integrated approach of NDVI and MNDWI in exploring drying up trends of wetlands.

• Journal of Plant Biotechnology
• /
• v.6 no.2
• /
• pp.91-96
• /
• 2004

The use of liquid-medium-based procedure relative to the solid media led to a 4.5-fold increase in the number of cotyledon-stage embryos. The most efficient system for multiplication and regeneration of somatic embryos was CP6 procedure with the media MSD40/MSD20/MSM6AC/FNL0S3S3GM. However, the rate of regeneration was lower. About 71％ of the embryos with dicotyledon were continued to develop the roots after desiccation treatment and 92％ of the germinated embryos produced shoots in 10 days. Of the four morphologically different types of embryos, dicotyledonous ones showed a high frequency of conversion, while only a few with fused and horn type cotyledon developed shoots. Mature somatic embryos were desiccated in empty petri dishes for 12-72 h. Embryo survival rate was the highest after 12 h of desiccation, but maximal germination was observed at 24 h. After desiccation, they were placed on MS medium without growth regulators for germination. Germinating embryos were transferred to small pots with vermiculite for plant regeneration. The etiolating the plants during the growth was resolved to add 1％ activated charcoal on hormone-free MS medium.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.1-9
• /
• 2009

Water binder ratio combine high-performance concrete shrinkage of less than 0.4 to determine the transformation to a total shrinkage of water to move outside and internal consumption of moisture due to drying shrinkage and autogenous shrinkage, and then, the relative humidity changes and strain to be approached by surface physics describe the relationship between self-desiccation and autogenous shrinkage was set. To verify the self-desiccation in the humidity shrinkage and humidity measurements performed, and the research model, Tazawa, CEB-FIP model than to let the measure and the most similar results in this study based on self-desiccation model, autogenous shrinkage didn't represent the linear shrinkage by the drying shrinkage of the external moving but exponential relationships, unlike with the nature and rapid in the early age properly describes the attributes in shrinkage could see. After this research to move moisture and to reflect the shrinkage model, temperature, moisture transfer, strain analysis by multi-physics model is very similar to the results of mock-up specimen measurements performed for this research, the value measured by the internal consumption of moisture, therefore self-desiccation and a multi-physics model considering autogenous shrinkage might be relevant.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.753-760
• /
• 2021

This study was carried out to discover suitable packaging methods during the cold or frozen storage of sawtooth oak and Japanese larch seedlings, which are major afforestation tree species in Korea. The weight loss rate of sawtooth oak was lower under frozen storage at -2℃ (maximum, 33.7%) than under cold storage at 2℃ (maximum, 61.0%). A film liner treatment inside the packaging box effectively suppressed the increase in the weight loss rate. For the sawtooth oak containerized seedlings, when stored at -2℃, the rate of weight loss was 17.9 to 25.4% in the untreated group and less than 1% in the film liner treatment group. Similar results were observed with Japanese larch. After two months of freezing at -2℃, both species maintained a low index of 1.0 - 1.1 with regard to the degree of shoot desiccation of containerized seedlings, and there was no significant difference between the treatments. On the other hand, the chlorine dioxide treatment could more effectively reduce the occurrence of mold and shoot desiccation than a PE single treatment in bare-root seedlings. According to these results, it was concluded that frozen storage is generally suitable as a means of long-term storage compared to cold storage of sawtooth oak and Japanese larch. A chlorine dioxide treatment at 20 ppm was effective for maintaining seedling quality levels during storage, demonstrating the good effect of suppressing the occurrence of shoot desiccation and the occurrence of mold.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.442-450
• /
• 2023

This study sought to determine the desiccation tolerance and storage behavior of Sarcandra glabra seeds to assist in the establishment of an ex-situ conservation strategy for the species. The basic germination characteristics of S. glabra seeds were investigated. Subsequently, the seeds were dried to various desiccation levels to allow for analysis of their germination characteristics and seed integrity. In addition, the seeds were subjected to germination tests after being stored for different durations. The initial seed moisture content following the removal of the fleshy fruit was 32.8%, and the fresh seeds maintained their seed viability even after a decrease in the seed moisture content to 4.8%, while the germination percentage was 81.0%. The germination percentage of the seeds decreased to 55.0% and 30.0% when they were desiccated to moisture contents of 2.3% and 2.2%, respectively. By contrast, when the stored seeds were desiccated, they maintained their seed viability and vigor at a moisture content of 18.6%; however, when the moisture content decreased below 5.0%, both the seed viability and vigor significantly declined and the germination percentage fell below 20.0%. Furthermore, analysis of the seed leachate revealed that the decrease in the seed viability and vigor was associated with both increased electrical conductivity and increased concentrations of inorganic compounds such as potassium and calcium. In conclusion, the findings of this study show S. glabra seeds to possess desiccation tolerance that falls somewhere between the recalcitrant and intermediate seed types, with the observed variations depending on the degree of deterioration.