• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1025-1032
• /
• 2005

This paper presents experimental and analytical studies on long-term behavior of square CFT columns with diaphragm. In order to investigate the effect of the diaphragm on the long~term behavior, experiments for six specimens with two diaphragms and three different column length, and three-dimensional finite element analysis for each specimen have been performed. The finite element models considering the interface behavior between the steel tube and the inner concrete were verified from comparison of the test results with the analysis results. From the test and the analysis results, the following conclusions were obtained. The confinement effect created by the diaphragm does not depends on column length and influences only a part of the whole column that is from the end to the depth which is the same to the width of the column. The shortening of the column with diaphragm which covers more than a half of the cross sectional area of the inner concrete is the same as that of the column under a load applied on the steel tube and the entire section of the inner concrete.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.315-322
• /
• 2012

Alkali-activated slag (AAS) is the most obvious alternative materials that can replace OPC. But, AAS industrial usage as a structural material should be evaluated for its durability. Carbonation resistance is one of the most important factors in durability evaluation. Test results for 18 slag-based mortars activated by sodium silicate and 6 OPC mortars were obtained in this study to verify the carbonation property. Main variables considered in the study were flow, compressive strength before and after carbonation, and carbonation depth. Mineralogical and micro-structural analysis of OPC and AAS specimens prior to and after carbonation was conducted using XRD, TGA, FTIR FE-SEM. Test results showed that CHS was major hydration products of AAS and, unlike OPC, no other hydration products were found. After carbonation, CSH of hydration product in AAS turned into an amorphous silica gel, and alumina compounds was not detected. From the analysis of the results, it was estimated that the micro-structures of CSH in AAS easily collapsed during carbonation. Also, the results showed that this collapse of chemical chain of CSH lowered the compressive strength of concrete after carbonation. By increasing the dosage of activators, carbonation resistance and compressive strength were effectively improved.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.404-417
• /
• 2016

The purpose of this study is to examine the extent to which the deterioration in strength of high strength concrete of 60MPa replaced by a large amount of recycled coarse aggregates (more than 60% to 100% of replacement ratio) could be recovered with steel fiber reinforcement through material compressive strength test and shear failure test on short and middle beams and then to offer useful data for aggregate supply system of a sustainable resource circulation type. This study first examined the results of previous related tests. The results of the material compressive strength tests confirmed that when using a combination of steel fiber reinforcements of volumn ratio 0.75% and high quality recycled coarse aggregates with an water absorption rate within 2.0%, the strength characteristics of high strength concrete of 60MPa level were not only restored to the strength level of concrete made with natural aggregates, but also showed superior ductility. And the shear failure tests on short and middle beams using recycled coarse aggregates more than 60% with shear span to depth ratio (a/d) of 2 and 4 controlled by shear forces mainly confirmed that effects of superior shear strength increase and ductile behavior characteristics were showed by steel fiber reinforcements.

• Journal of Periodontal and Implant Science
• /
• v.26 no.2
• /
• pp.531-541
• /
• 1996

Periodontal disease is characterized by destruction of supporting tissues caused by invasion of plaque bacteria and defense mechanism of host. Many dentists are very interested in laser therapy on various intraoral soft tissue lesions including inflammatory periodontal pocket. In order to determine the therapeutic effect of intrapocket irradiation of a pulsed- Nd : YAG laser on the inflammatory periodontal pockets, bilateral 60 teeth with 4-6mm in probing pocket depth and gingival inflammation were selected and evaluated by sulcus bleeding index(SBI), and plaque index(pI) for baseline record. Intrapocket irradiation($300{\mu}m$ fiber optic, I.5W power, for 2 min.) of a pulsed-Nd : YAG laser(EL.EN.EN060, Italy) was applied on half of them. As the control group, the same procedure except power-off was repeated on the contralateral 30 teeth. At 1-, 2-, 3-, and 4-week after intrapocket manipulation, every tooth was reevaluated by the same clinical indices. And the difference between the lased group and control group was statistically analyzed by paired t-test and Chi-square test in Microstat program. Following results were obtained: 1. Until I-week and 2-week after intrapocket manipulation, SBI was lowered in both lased group and control group, compared to baseline SBI, but from 3-week after, the recovering tendency toward baseline was noted, and at only 2-week after, the number of teeth showing lowered SBI was significantly more in lased group than in control group(p<0.05). 2. PI of both lased group and control group was lowered through whole experimental period from I-week to 4-week after, compared to baseline PI(p<0.05), but there was no significant difference between lased group and control group(p>0.1). The results suggest that intrapocket irradiation of a pulsed-Nd:YAG laser may lead somewhat remission of gingival inflammation, but for more favorable therapeutic result the thorough root planing should be necessarily accompanied with gingival curettage.

• Journal of the Korean Chemical Society
• /
• v.61 no.6
• /
• pp.378-387
• /
• 2017

In this study, we analyzed the causes of decrease in the number of students taking Chemistry ? in the College Scholastics Ability Test (CSAT) by analyzing the adequacy of the Chemistry I question in the CSAT and the recognition survey of students and teachers about the Chemistry I choice. We analyzed some questions in Chemistry I of the CSAT from the year 2014 to 2016. The questions were analyzed to determine whether they were appropriate to the curriculum content, achievement standard, and achievement level. The target of the survey for perception was 452 senior high school students and 68 science teachers. The result of the study showed that the questions in Chemistry I are somewhat difficult compared to the depth and achievement level required by the curriculum, and it also requires mathematical thinking ability. Students recognized the mathematical thinking and complex mathematical skills are needed to solve problems in Chemistry I. Teachers also thought that the choice of Chemistry I is unfavorable in aspect of meeting the minimum academic ability standard, and accordingly, they did not actively recommend students to take Chemistry I. Moreover, most of the teachers recognized that it is necessary to improve the direction of writing questions for Chemistry I. Therefore, setting questions that can be solved using chemical knowledge, not mathematical ability need to be addressed.

• Journal of Digital Convergence
• /
• v.8 no.2
• /
• pp.69-87
• /
• 2010

This research is to investigate phatic communication by puting the purpose in maintaining and strengthening social relationship among people in groups in Korean residential community space. Phatic communication is the activity for friendship, expressing and sharing the tastes, expectations, and common features of residents by inducing the participation of residents in all sorts of events, meetings, and activities in residential space. Through this pathic activity, the range of communication age, the time of communication, the selection of location, and the topic of communication discourse are examined. The investigation methods of this research were taken two ways: First, it carried out the observation of participation and in-depth interview by the participation of researcher in a way of life as a member. In order to prove more objectively, it enhances the reliability of data by adding the questionnaire survey through the convenience sampling of 150 residents of three communities. Moreover, $x^2$; chi-square test was conducted in order to verify the difference in heterogeneous groups. Accordingly, this research will bring about the great development in cultural studies by exploring a way of Korean life, based on the communication of Korea community in residential life space, which can unify the community through sharing the meaning, interacting and delivering the message.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.242-251
• /
• 2013

Recently, while global concern over offshore resources exploration and development is being increased rapidly, offshore plant industry is highlighted as an industry of high added value. Along with this global trend, domestic concern over offshore plant development is being increased as well. In the overseas case, a marine geotechnical survey guideline for confirming characteristics of seabed sediments is available at the time of installation of offshore plant but such guideline is not available in our country. In this study, survey techniques fit for domestic marine environment was applied according to overseas guideline at southern coastal area, Korea. Among the marine geophysical survey techniques being proposed abroad, magnetic survey and seabed photograph were excluded. However, highly reliable data analysis was enabled for marine geophysical survey, which includes in-situ coring investigation and laboratory soil test. In addition, continuous ocean current survey was included to find scour potential due to the current around the offshore plant. Although coring depth is not so deep, we predicted geological structure through the analysis of amplitude features of seismic data. Characteristics of seabed sediments cold be obtained regionally and directly through combined analysis of marine geophysical survey data and coring data.

• Journal of Gastric Cancer
• /
• v.7 no.3
• /
• pp.160-166
• /
• 2007

Purpose: Recently, chemosensitivity tests have become widely used for the selection of effective drugs in gastric cancer patients. In this study, a chemosensitivity test was performed to select agents to increase the effectiveness of adjuvant chemotherapy. Materials and Methods: Chemosensitivity testing was performed in 81 gastric cancer patients that received a gastrectomy at the Yeungnam University Hospital. An ATP (adenosine triphosphate) based chemotherapy response assay was used. Clinicopatholgical factors such as sex, age, expression of tumor markers (CEA and CA19-9 levels), location of the tumor, morphology of advanced cancer, histological type, cell differentiation, depth of invasion, Lauren classification, Ming classification, lymphatic invasion, vascular invasion, neural invasion, lymph node metastasis and TNM stage were used to correlate the chemosensitivity and clinicopathological factors. Results: The most effective antitumor agents in gastric cancer patients were (in order of effectiveness) 5-FU, Epirubicin, lrinotecan and Oxaliplatin in our series. The chemosensitivity test showed a significant difference in susceptibility according to clinicopathological factors. Conclusion: Further studies on multidrug therapy are needed to evaluate synergistic effects of drugs. Therefore, for effective chemotherapy, it is more efficacious to select a chemosensitive drug than continue to use the same drug regimen.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.2
• /
• pp.5-14
• /
• 2005

In the present study, the liquefaction potential in the area of the Incheon international airport was assessed by applying the data of both standard penetration tests and laboratory tests to the modified Seed & Idriss method. The analysis was performed against the non-plastic silty soil layer and silty sand soil layer existing within the depth of 20m and under the ground water level, having the standard penetration value(N) of below 20. Also, each set of data was mapped using the GIS(Geographic Information System) and the safety factor against the liquefaction potential ($FS_{liquefaction}$) was obtained by overlapping those layers. Throughout the analysis, it was found that there exists a potential hazard zone for the liquefaction, showing partially that the safety factor against the liquefaction potential is 1.0 to 1.5 below the standard safety factor criterion. It is further thought to be necessary that the liquefaction potential for the corresponding hazard zone be additionally assessed in detail.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.67-76
• /
• 2011

The use of glass-fiber-reinforced polymer (GFRP) bars in reinforced concrete (RC) structures has emerged as an alternative to traditional RC due to the corrosion of steel in aggressive environments. Although the number of analytical and experimental studies on RC beams with GFRP reinforcement has increased in recent decades, it is still lower than the number of such studies related to steel RC structures. This paper presents the experimental moment deflection relations of GFRP reinforced beam which are spliced. Test variables were different reinforcement ratio and cover thickness of GFRP rebars. Seven concrete beams reinforced with steel GFRP re-Bars were tested. All the specimens had a span of 4000mm, provided with 12.7mm nominal diameter steel and GFRP rebars. All test specimens were tested under 2-point loads so that the spliced region be subject to constant moment. The experimental results show that the ultimate moment capacity of beam increasing of the reinforcement ratio. Failure mode of these specimens was sensitively vary according to the reinforcement ratio. The change of beam effective depth, which was caused by cover thickness variation, controlled the maximum strength and deflection because of cover spalling in tension face.