• 한국강구조학회 논문집
• /
• 제28권3호
• /
• pp.151-162
• /
• 2016

본 연구는 합성보와 하이브리드보의 장점을 활용한 신형상 하이브리드 합성보의 형상을 개발하였으며, 그 중 춤이 작은 형상의 휨성능을 검증하기 위해 12개의 휨 실험체를 제작하여 단조가력 실험을 진행하였다. 휨성능 실험결과, 공칭하중에 대한 실험체 최대하중의 비는 평균 1.24배로 안정적인 내력을 확보하였으며, 합성보의 내력평가는 기존 합성보 내력평가식(KBC 2009)을 적용 가능한 것으로 판단된다. 또한 하부강판에 고강도강($F_y=650MPa$) 적용 시 소재의 기계적 특성 및 구조성능에 대한 충분한 사전검토가 필요할 것으로 판단된다.

• 복식문화연구
• /
• 제25권4호
• /
• pp.476-487
• /
• 2017

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women's body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

• Journal of Periodontal and Implant Science
• /
• 제32권3호
• /
• pp.631-642
• /
• 2002

The present study evaluated of regeneration effect of platelet rich plasma on the treatment of classII furcation involvement, with allograft in humans. The control was treated without bioabsorbable membrane, and the test was treated with bioabsorbable membrane. Pocket depth, clinical attachment level, and gingival recession were measured at baseline, postoperative 3, 6months. Both groups were statistically analyzed by Wilcoxon signed Ranks Test & Mann-whitney Test using SPSS program (5% significance level). The results were as follows: 1. The change of pocket depth and clinical attachment level in both groups was decreased significantly at 3, 6months.(p<0.05) 2. The change of gingival recession in both groups was increased significantly at 3, 6months than at baseline.(p (0.05) 3. The change of pocket depth and clinical attachment level in both groups was increased significantly at 3, 6months, but there were no statistically or clinically significant differences with both groups. 4. The change of gingival recession in both groups was increased significantly at 3, 6months, but there were no statistically or clinically significant differences with both groups. 5. The significant reduction of the pocket depth and clinical attachment level exhibited marked changes at 3 months in both groups. In conclusion, the results of this study suggest that there are no statistically or clinically significant differences between with and without bioabsorbable membrane on treatment of classII furcations using allograft and PRP

• Journal of Periodontal and Implant Science
• /
• 제34권3호
• /
• pp.499-508
• /
• 2004

Regeneration of Periodontium with PRP does not only improve regeneration rate and density of bone but have a possibility to estimate faster healing process for soft tissue. And also, autogenous bone and xenogenic bone graft are effective on regeneration of periodontium. The purpose of this study is to evaluate the effectiveness of autogenous bone and xenogenic bone $(BBP^{(R)})$ grafts with the PRP technique on regeneration of periodontium. 52 Generally healthy Pt. who had pocket depth 5mm at any of 6 surfaces of the teeth were in the study at Dept. of Perio. in Dankook Dental Hospital. Open Flap was treated for 18 infra-bony pockets as control group, autogenous bone with PRP was inserted for 25 infrabony pockets as first test group, and $(BBP^{(R)})$ with PRP was inserted for 22 infrabony pockets as 2nd test group. Then evaluation was made after 3 and 6 months 1. There were significant differences between average probing pocket depth and clinical attachment level of 3, 6 months and minimal and maximal attachment level after 6 months each other. 2. There were significant differences in average probing pocket depth of control group and 2nd experimental group between 1 and 6 months. For clinical attachment level and minimal and maximal proving attachment level, there was a significant difference after 6 month of surgery. 3. There was no significant difference between two test groups for average probing depth, clinical attachment level, and minimal and maximal probing attachment level. As the result, PRP with bone graft could be very effective for regeneration of periodontium and there was no difference between xenogenic bone and autogenous bone.

• 한국지진공학회논문집
• /
• 제24권5호
• /
• pp.211-217
• /
• 2020

Earthquake preparedness has become more important with recent increase in the number of earthquakes in Korea, but many existing structures are not prepared for earthquakes. There are various types of liquefaction prevention method that can be applied, such as compaction, replacement, dewatering, and inhibition of shear strain. However, most of the liquefaction prevention methods are applied before construction, and it is important to find optimal methods that can be applied to existing structures and that have few effects on the environment, such as noise, vibration, and changes in underground water level. The purpose of this study is to estimate the correlation between the displacement of a structure and variations of pore water pressure on the ground in accordance with the depth of the sheet file when liquidation occurs. To achieve this, a shaking table test was performed for Joo-Mun-Jin standard sand and an earth pressure, accelerometer, pore water pressure transducer, and LVDT were installed in both the non-liquefiable layer and the liquefiable layer to measure the subsidence and excess pore water pressure in accordance with the time of each embedded depth. Then the results were analyzed. A comparison of the pore water pressure in accordance with Hsp/Hsl was shown to prevent lateral water flow at 1, 0.85 and confirmed that the pore water pressure increased. In addition, the relationship between Hsp/Hsl and subsidence was expressed as a trend line to calculate the expected settlement rate formula for the embedded depth ratio.

• Journal of Periodontal and Implant Science
• /
• 제35권3호
• /
• pp.703-718
• /
• 2005

The purpose of this study was to evaluate the clinical efficacy of guided tissue regeneration(GTR) technique using chitosan nanofiber membrane and to compare it to the clinical efficacy following GTR using PLA/PLGA(copolymer of polvlactic acid and polylacticglycolic acid) membrane in mandibular class II furcation defects in human. The chitosan nanofiber membranes were applied to the mandibular class II furcation defects of 13 patients(test group) and PLA/PLGA membranes were applied to those of 11 patients(control group). Probing pocket depth, clinical attachment level, gingival recession, plaque index and gingival index were measured at baseline and 3 months postoperatively. Vertical and horizontal furcation defect depth were measured at surgery. Both groups were statistically analyzed by Wilcoxon signed Ranks Test and Mann-Whitney Test using SPSS program. The results were as follows: 1. Probing pocket depth, clinical attachment loss and gingival index were significantly reduced at 3 months postoperatively compared to values of baseline in both groups(p<0.05). 2. Gingival recession and plaque index were not significantly decreased at 3 months postoperatively compared to values of baseline in both groups. 3. No significant difference between two groups could be detected with regard to changes of probing pocket depth, gingival recession, clinical attachment level, plaque index and gingival index at 3 months postoperatively. In conclusion, chitosan nanofiber membrane is effective in the treatment of human mandibular class II furcation defects and a longer period study is needed to fully evaluate the outcomes.

• 한국해양공학회지
• /
• 제31권4호
• /
• pp.257-265
• /
• 2017

In this study, a series of numerical simulations was conducted in order to design a truncated mooring line with a static similarity to the prototype. A finite element method based on minimizing the potential energy was utilized to describe the dynamics of mooring lines. The prototype mooring lines considered were installed at a water depth of 1,000 m, whereas the KRISO ocean engineering basin (OEB) in Daejeon has a water depth of 3.2 m, which represents 192 m using a scaling of 1:60. First, an investigation for the design of the truncated mooring line was carried out to match the static characteristics of the KRISO Daejeon OEB environment. Then, the same procedure was performed with the KRISO new deepwater ocean engineering basin (DOEB) that is under construction in Busan. This new facility has a water depth of 15 m, which reflects a real scale depth of 900 m considering the 1:60 scaling factor. A finite element method was used to model the mooring line dynamics. It was found that the targeted truncated mooring line could not be designed under the circumstances of the KRISO OEB with any material properties, whereas several mooring lines were easily matched to the prototype under the circumstances of the KRISO DOEB.

• 한국건축시공학회지
• /
• 제23권1호
• /
• pp.23-33
• /
• 2023

목구조 건축물의 목재 구조부재는 내화 설계시 국제적으로 탄화 속도나 탄화 두께를 사용하며, 국내에서도 내화구조 인정시 탄화 두께 기준을 적용한다. 본 연구에서는 국내산 낙엽송으로 제작된 구조용 집성재 기둥의 탄화 특성에 대하여 내화시험을 실시하여 탄화 특성, 하중비에 따른 영향 및 유로코드(Euro code)에서 제시한 탄화 속도와 비교 분석하였다. 내화시험 결과 탄화 두께는 단면 코너 부위의 영향을 보이는 것으로 나타났으며 하중비 0.9 이하에서는 하중비가 탄화 두께에 미치는 영향은 미미한 것으로 나타났다.

• 방송공학회논문지
• /
• 제13권6호
• /
• pp.796-803
• /
• 2008

본 논문에서는 사용자에게 보다 실감있고, 사용자가 선호하는 다시점 3D 영상의 3D 입체감을 제공할 수 있는, 다시점 3D 동영상의 인식 깊이감을 조절하는 기법을 제안한다. 카메라 배열을 변경하는 기존의 방법들과 달리, 제안한 기법은 사용자가 요청하는 깊이 범위의 스케일링을 활용하기 위하여 영상의 깊이 데이터를 활용한다. 다시점 영상 및 해당 시점의 깊이 영상을 입력받아 각 화소의 변이로 변환하고, 각 화소의 변이를 조절함으로써 인식되는 깊이감을 조절하게 된다. 제안 방법은 다시점 카메라로부터 획득한 다시점 영상의 처리가 가능하며, 또한 2-시점 입체영상부터 다시점 영상까지 적용이 가능하다. 실험에서는 제안한 방법을 통하여 깊이감이 조절된 다시점 동영상을 다시점 3D 모니터로 시청하였을 때, 깊이감이 사용자가 선호하는 깊이에 따라서 스케일되는 것을 DSCQS(Double Stimulus Continuous Quality Scale)으로 확인하였다.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.338-344
• /
• 2014

The purpose of this study was to evaluate the dispersion degree of particles using a nanoindentation test for titanium oxide nanoparticles/epoxy resin nanocomposites. Thus, the effects of the particle size and weight fraction, dispersion agent, and position of the sample on the modulus and degree of particle dispersion in the nanocomposites were investigated. As a result, the dispersion degree of large particles was found to be better than that of smaller particles in composites. It could be found that the aggregation or agglomeration of small particles with large surface energy occurred more easily in nanocomposites because of the large specific surface area. The moduli of the upper side of the film-shaped sample obtained from a nanoindentation test were low scattering, while the values for the bottom side were high scattering. Thus, the dispersion situation of the nanoparticles on the upper side of film-shaped samples could be considered to be better than that for the bottom side. This could be concluded due to the non-uniform nanoparticle dispersion in the same sample. The modulus obtained from nanoindentation test increased slightly with the content of nanoparticles and increased with the indented depth for the same sample. The latter is presumably due to the increase in the accumulated particles facing the indenter with the indented depth. The nanoindentation test was found to be a useful method to evaluate the dispersion status of nanoparticles in nanocomposites.