• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권3호
• /
• pp.238-243
• /
• 2001

Purpose : The purpose of this study was to determine radiologic variables affecting extraction of impacted mandibular third molar. Materials and Methods : This study was investigated on 44 consecutive extractions of unilateral impacted mandibular third molars (Male;34, Female;10, Mean age;24.98, Age range;19-35). Fourteen radiologic variables, which were actual value except only one, were evaluated to establish their relation to the operation time. The Pearson correlation coefficient and Stepwise procedures for regression analysis were carried out. Results : Eight variables (depth, angulation, ramus width, relationship to the second molar, distal ramus depth, mesial ramus depth, mesial periodontal ligament width and follicle) showed a statistically significant relation to the operation time(Pearson correlation coefficient, p<0.05). Two variables, depth and mesial periodontal ligament width, showed the most powerful and just relation to the operation time($r^2$ = 0.349, p<0.05). Conclusion : This study shows that our results can help general practioner to estimate the operation time of extraction of impacted mandibular third molars by measuring two radiologic variables ; depth and mesial periondontal ligament width.

• 지질공학
• /
• 제8권1호
• /
• pp.87-98
• /
• 1998

효율적인 검층검색을 위한 기초연구의 일환으로 검층에서의 심도 오차의 원인과 범위를 추적하고 심도보정을 실시하였다. 이를 위하여 강원도 혼천군 서석면 일대를 중심으로한 소규모 퇴적분지의 하나인 풍암분지 내의한 시험시추공을 대상으로 물리검층 예비시험과 물리검층, 코어검층, 그리고 코어물성측정을 실시하고 그 결과를 종합적으로 분석하였다. 연구결과는 물리검층 자체에서 나타나는 심도오차의 크기는 무시할 수 있는 수준임을 밝혔으며 이로부터 물리검층에서의 심도를 시추공 조사의 심도기준으로 정할 수 있었다. 아울러 코어물성측정 결과는 코어시료의 심도 보정에 효과적으로 적용될 수 있음을 보였다.

• 천문학회지
• /
• 제45권2호
• /
• pp.25-29
• /
• 2012

New methods are developed to estimate the effective temperature (Te), surface gravity (log g), and metallicity ([A/H]) simultaneously with the spectral line depth ratios. Using the model atmosphere grids, depth values are calculated for the wavelength range of $4000{\AA}-5600{\AA}$ for various temperatures, gravities, and metallicities. All possible different combinations of line depth ratios for different pairs of ratios are investigated. A graphical 3D figure is produced with X, Y, and Z axes corresponding to Te, log g, and [A/H], respectively. By reading a cross point of two curves plotted by a connection of three parameters obtained from spectral line depth ratio pairs on each of the three projected planes, Te, log g, and [A/H] are determined simultaneously. In addition, an analytical method is devised based on the similar algorithm developed for the graphical method. Our methods were applied to estimate the fundamental atmospheric parameters of the Sun and Arcturus.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.39-45
• /
• 1982

A floating rig, which has been used to develop the ocean resources has a common characteristics with the catamaran ship that it is composed of the two simple hulls. So the motion responses of the floating rig can be predicted theoretically with the aid of the strip method as those of the catamaran. And for the strip method, the two-dimensional hydrodynamic coefficients are the most important inputs to predict the results accurately. In this report, a theoretical method is proposed for calculating two-dimensional hydrodynamic forces and moments acting upon arbitrary shaped twin-hull cylinders, which are forced to make a heaving, swaying and rolling oscillation about their mean position on the free surface of a finite depth water. The theoretical results by making use of the singularity distribution method are presented. The accuracy of the coefficients was confirmed to be reasonable by the comparison with the Ohkusu's results for two circular cylinders in an infinite depth water. The depth effects on two-dimensional hydrodynamic coefficients for two circular cylinders are also checked. In some range of wave numbers, large differences in the behavior of hydrodynamic coefficients between for a finite depth and for an infinite depth are shown.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.745-753
• /
• 2002

It is required to evaluate nondestructively the crack depth of surface-breaking cracks for the assurance of safety of structure. Optical generation of ultrasound produces well defined pulses with a repeatable frequency content, that are free of any mechanical resonances; they are broad band and are ideal for the measurement of attenuation and scattering over a wide frequency range. Self-calibrating surface signal transmission measurement is very sensitive and practical tool for surface-breaking crack depth. In this paper, the self-calibrating technique by laser-based ultrasound is used to evaluate the depth of surface-breaking crack of material. It is suggested that the relationship between the signal transmission and crack depth can be used as a practical model for predicting the surface-breaking crack depths from the signal transmission measured in structure.

• 기술사
• /
• 제25권4호
• /
• pp.102-108
• /
• 1992

This study was carried to find out the soil characteristics of landslide site and to develope landslide prediction method by seismic refraction prospecting. For these aims, landslide condition and travel time were investigated at 68 Landslide sites over the country during 1990 to 1991. The results were as follows. 1. The surface of rupture was included mainly in C layer. Its Hardness was less than 3kg / $\textrm{cm}^2$ at the upper pare of landslide. 2. When the profile line length was 20m, the range of travel time was 40 to 90 msec. The travel time did not differ between bedrocks. 3. Refraction distance ranged from 1 to 7m and mean of that was 2.5m. Travel time was increased according to receiving distance without large variance in the refraction distance but that was appeared large variance out of the refraction distance on slope that has shallow soil depth and discontinuous ground surface. Therefore, the spread distance must be shorten to 10-l5m. 4. The seismic velocity at the first layer(layer of rupture) was less than 500m1sec by degree of weathering and the velocity at the second layer decreased in order of Granite> Granitic gneiss >Sedimentary rock. 5. The first layer observed by seismic refraction was contained C layer that has parent material and weathered rocks of hardness 10-20kg/$\textrm{cm}^2$. 6. Among the range of seismic velocity was less than 200m/sec in 63% of the total plots, 200-300m/sec in 34% and 300-500m /sec in 3%. 7. There was a proportional relationship between seismic prospecting soil depth and executive soil depth, and seismic propection soil depth was about 10 to 20cm deeper than the order.

• Earthquakes and Structures
• /
• 제6권2호
• /
• pp.141-161
• /
• 2014

This article presents a new generation of empirical ground motion models for the prediction of response spectral accelerations in soil conditions, specifically developed for the Vrancea intermediate-depth seismic source. The strong ground motion database from which the ground motion prediction model is derived consists of over 800 horizontal components of acceleration recorded from nine Vrancea intermediate-depth seismic events as well as from other seventeen intermediate-depth earthquakes produced in other seismically active regions in the world. Among the main features of the new ground motion model are the prediction of spectral ordinates values (besides the prediction of the peak ground acceleration), the extension of the magnitudes range applicability, the use of consistent metrics (epicentral distance) for this type of seismic source, the extension of the distance range applicability to 300 km, the partition of total standard deviation in intra- and inter-event standard deviations and the use of a national strong ground motion database more than two times larger than in the previous studies. The results suggest that this model is an improvement of the previous generation of ground motion prediction models and can be properly employed in the analysis of the seismic hazard of Romania.

• 대한기계학회논문집B
• /
• 제24권4호
• /
• pp.599-607
• /
• 2000

In this study, experiments have been performed to examine the effects of background gray-level on the depth-of-field and on the in-focus criteria. The normalized value of contrast(VC) and the gradient indicator(GI) were used as the in-focus criteria for the small and the large size-ranges of particles, respectively. The slightly larger number of pixels were detected with the brighter background. The maximum of the normalized value of contrast(VCmax) is decreased with the brighter background and its deviation from that with the background gray-level of 160 turned out to be about $pm$15% when the background gray-level changes from 100 to 200. However, the maximum gradient indicator(GImax) changes with the background gray-level within only $pm$5%. The depth-of-field for the VC-applicable particle-size range is largely dependent on the background gray-level. On the other hand, the depth-of-field for the GI-applicable particle-size range changes only slightly with the background gray-level. To keep the normalized standard deviation of the particle size within 0.1, the background gray-level should be set 160$pm$20 for both the VC-applicable and GI-applicable ranges which cover the particle size between $10{\mu}m$ and $300{\mu}m$.

• Journal of Welding and Joining
• /
• 제6권2호
• /
• pp.30-39
• /
• 1988

Generally, as the welded region of weld structures has the incomplete bead and welded deposit which are able to behave like the surface cracks occasinally, there is a high possibility that the fatigue fracture of the weld structures is due to the surface cracks on the wlded region. This study was done to investigate the effects of post weld heat treatment (PWHT) on the fatigue behaviors of the surface crack of the heat affected zone (HAZ) for the multi-pass welds under the repetitive pure bending moment. The obtained results are summarized as follows : 1. The crack grows to the depth direction initially as the number of cylces increase, the amount of crack length is increased for the surface dir3ction and cive versa for the depth direction. 2. The fatigue life is increased in a order of as weld, PWHT specimens and parent. 3. As the number of cycles increase, the crack length is increased to th surface direction. The increase of the depth length is blunted at the center of specimen thickness. 4. The fatigue crack growth of PWHT specimens to the surface direction is dependent upon the holding time and applied stress during PWHT. In order words, the crack growth rate decreases with the holding time and increases with the applied stress during PWHT. 5. As the crack grows, the aspect formed in the course of crack propagation approaches to semicircle for parent and ellipse with the largest semidiameter for PWHT ($1/4hr, 15kgf/mm^2$) 6. At depth direction, it is difficult to apply to the paris' equation because of the scattered data between the crack growth rate and the stress intensity factor range.

• 한국음향학회지
• /
• 제41권2호
• /
• pp.131-142
• /
• 2022

본 연구에서는 동해 수심변화가 큰 해양환경 하에서 음파의 수평굴절 모의 가능성을 고찰하고자 포물선방정식 기반의 3차원 모델을 도입한다. 이 모델은 상관항과 비상관항을 분리함으로써 근사적 해를 제공한다. 가상 수심분포(25 km × 4 km)에 대해 주파수 75 Hz인 음원을 가정하여 모의한 결과는 전달손실의 수평분포 상 분명한 수평굴절을 보인다. 이 굴절 정도는 전파 거리에 비선형적으로 증가하고 횡방향 수심 경사도에 비례하여 증가한다. 실제 수심분포(25 km × 8 km)에 대한 모의 결과도 이러한 수평굴절을 잘 보인다. 수평굴절은 동일 자료 내에서는 해상도별로 수평음장분포가 크게 변하지 않는데, 이는 모델이 모의 전 수심자료에 대해 내삽을 하기 때문이다. 반면, 수심자료 종류가 다를 경우 수평음장 분포는 크게 달라진다.