• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.263-270
• /
• 2020

In this study, the physical mechanism and diffusion effects in aluminium implanted silicon was investigated. For fabricating power semiconductor devices, an aluminum implantation can be used as an emitter and a long drift region in a power diode, transistor, and thyristor. Thermal treatment with O₂ gas exhibited to a remarkably deeper profile than inert gas with N₂ in the depth of junction structure. The redistribution of aluminum implanted through via thermal annealing exhibited oxidation-enhanced diffusion in comparison with inert gas atmosphere. To investigate doping distribution for implantation and diffusion experiments, spreading resistance and secondary ion mass spectrometer tools were used for the measurements. For the deep-junction structure of these experiments, aluminum implantation and diffusion exhibited a junction depth around 20 ㎛ for the fabrication of power silicon devices.

• 한국토양비료학회지
• /
• 제48권2호
• /
• pp.105-118
• /
• 2015

This study was carried out to investigate the effects of profile disturbance with different artificial accumulation history on physico-chemical properties of soil under plastic film house. The investigations included soil profile description using soil column cylinder auger F10cm x h110cm, in situ and laboratory measurements of soil properties at five sites each at the cucumber (Site Ic ~ Vc) and grape (Site Ig ~ Vg) plastic film houses with artificial soil accumulation. The sites except sites Ic, IVc, IVg and Vg, belong to ex-paddy area. The types of accumulates around root zone included sandy loam soil for 3 sites, loam soil for 1 site, saprolite for 2 sites, and multi-layer with different accumulates for 3 sites. Especially, Site IIg has mixed plow zone (Ap horizon) with original soil and saprolite, whereas disturbed soil layers of the other sites are composed of only external accumulates. The soil depth disturbed by artificial accumulation ranged from 20 cm, for Site IIg, to whole measured depth of 110 cm, for Site IVc, Vc, and Site IVg. Elapsed time from artificially accumulation to investigation time ranged from 3 months, Site IIc, to more than 20 years, Site Vg, paddy-soil covering over well-drained upland soil during land leveling in 1980s. Disturbed top layer in all sites except Site Vg had no structure, indicating low structural stability. In situ infiltration rate had no correlation with texture or organic matter content, but highest value with highest variability in Site IIIc, the shortest elapsed time since sandy loam soil accumulation. Relatively low infiltration rate was observed in sites accumulated by saprolite with coarse texture, presumably because its low structural stability in the way of weathering process could result in relatively high compaction in agro-machine work or irrigation. In all cucumber sites, there were water-transport limited zone with very low permeable or impermeability within 50 cm under soil surface, but Site IIg, IIIg, and Vg, with relatively weak disturbance or structured soil, were the reverse. We observed the big change in texture and re-increase of organic matter content, available phosphate, and exchangeable cations between disturbed layer and original soil layer. This study, therefore, suggest that the accumulation of coarse material such as saprolite for cultivating cash crop under plastic film house might not improve soil drainage and structural stability, inversely showing weaker disturbance of original soil profile with higher drainage.

• Wind and Structures
• /
• 제37권1호
• /
• pp.25-38
• /
• 2023

Due to the complexity and difficulty in meeting the multiphase flow complexity, similarity, and multiscale characteristics, the mechanism of snow drift is so complicated that the snow deposition prediction is still inaccurate and needs to be far improved. Meanwhile, the validation of prediction methods is also limited due to a lack of field-measured data about snow deposition. To this end, a field measurement activity about snow deposition around a cube with time was carried out, and the snow accumulation process was measured under blowing snow conditions in northwest China. The maximum snow depth, snow profile, and variation in snow depth around the cube were discussed and analyzed. The measured results indicated three stages of snow accumulation around the cube. First, snow is deposited in windward, lateral and leeward regions, and then the snow depth in windward and lateral regions increases. Secondly, when the snow in the windward region reaches its maximum, the downwash flow erodes the snow against the front wall. Meanwhile, snow range and depth in lateral regions have a significant increase. Thirdly, a narrow road in the leeward region is formed with the increase in snow range and depth, which results in higher wind speed and reforming snow deposition there. The field measurement study in this paper not only furthers understanding of the snow accumulation process instead of final deposition under complex conditions but also provides an important benchmark for validating prediction methods.

• 한국해양학회지
• /
• 제26권4호
• /
• pp.340-349
• /
• 1991

1987년 8월 24일부터 9월 28일까지 경기만에 발달한 조류 기원 사퇴위에서 측정한 조류 자료를 분석하여 해저면 상부 1.0 m 에서의 조류 속도(U /SUP 100/) 및 경계면에 서의 전단 속도(U /SUP */)를 구하였다. 전 조사기간 동안 평균 조류 속도는 중충(해 저면 상부 9.0 m)에서 창조시 56.3 cm/sec, 낙조시 63.7 cm/sec 의 지수는 0.15로 추 정된다. 해저 경계층에서의 유속 구조가 대수적 속도 구조 (logarithmix velocity profile) 가정을 이용하여 구한 U /SUP 100/, U /SUP */의 평균값은 각각 41.4 cm/sec로 계산되었다. 본 연구에서 계산된 평균 U /SUP */ 값은 (2.39 cm/sec)동일 지 역에서 최(1990)가 보고한 경계면에서의 임계전단 속도 U /SUP *c/ 보다 상당히 크며, 따라서 본 연구지역의 모래는 대부분의 조석 기간중 쉽게 침식 운반되는 것으로 보여 진다.

• Bulletin of the Korean Chemical Society
• /
• 제13권6호
• /
• pp.620-624
• /
• 1992

The analytical performance of glow discharge mass spectrometer (GD-MS), using a flat type ion source is discussed. The efficiency of ion extraction was maximized at the distance between anode and cathode of 6 mm. At the operation condition of 4 mA, -1000 volt, and 1 mbar for the source, the optimum voltages for sampler and skimmer were40 volt and -280 volt, respectively. The intensities of Cu, Zn, and Mn were increased as a function of square root of current approximately. Korea standard reference materials (KSRM) were tested for an application study. The detection limits of most elements were obtained in the range of several ppm at the optimized operating condition. The peaks of aluminum and chromium were interfered by those of residual gases. The depth profile of nickel coated copper specimens (3, 5, 10 ${\mu}m$ thickness) were obtained by plotting time versus intensities of Ni and Cr after checking the thickness of nickel coated using a scanning electron microscope (SEM). At this moment, the sputtering rate of 0.2 ${\mu}m/min$ at the optimum operating condition was determined from the slope of the plot of time to the coating thickness. The roughness spectra of specimen's crater after 16 min, discharge were obtained using a Talysuf5m-120 roughness tester as well.

• 대한치과교정학회지
• /
• 제19권2호
• /
• pp.95-108
• /
• 1989

This study intended to calculate the cephalometric norms of Korean adult and to compare those with norms of the North American Caucasian by Moyers. Cephalometric headplates of 41 males and 31 females ranged in age from eighteen to twenty-six with normal occlusion and pleasing face were employed for this investigation. The tracings of the standard lateral cephalograms were analyzed by Moyers' method. As a result of this study, the following conclusion can be made. 1. Norms of Korean adult male and female were calculated. 2. There was no significant sexual difference in the basic craniofacial morphology. 3. The size of craniofacial skeleton was larger in male than in female. 4. The Korean male showed lower value of mandibular plane angle to craial base than that of the Caucasian male. 5. There was no significant difference in the anterior total facial height, however, in the posterior facial height the Korean male was larger than the Caucasian male, which manifested that the Korean male held more square-shaped profile. 6. The anteroposterior length of anterior and posterior cranial base, maxillary and mandibular skeletal and dentoalveolar effective length of the Korean male were shorter than those of the Caucasian male, and this suggested that the craniofacial profile depth of the Korean male was shorter than that of the Caucasian male.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.148-154
• /
• 2016

A study on the micro particle blasting was conducted to find the optimum conditions of the blasted surface of aluminum 6061. The particle type such as $Al_2O_3$ and SiC, nozzle diameter, pressure, standoff distance and injection time were used as blasting conditions. Statistical method of orthogonal arrays(ANOVA) was used to find optimum conditions of maximum depth and maximum diameter of blasted surface. Particle type, nozzle diameter, and pressure were found to be the main factors of maximum blasted depth and diameter. Maximum blasted diameter was affected by increasing pressure and nozzle diameter but saturated maximum diameter. Maximum blasted depth was affected by pressure and nozzle diameter when aluminum 6061 was blasted with $Al_2O_3$ particle. The value of surface roughness was increased as pressure and nozzle diameter increased when aluminum 6061 was blasted with SiC.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.151-156
• /
• 2007

In December 2006, 2D surface streamer and Ocean Bottom Seismometer (OBS) data were acquired in the Ulleung basin in Korea where strong Bottom Simulating Reflectors (BSR) were shown as a result of 2D and 3D multichannel (MCS) reflection survey. The aim of this study is to provide another reliable source for estimating P wave velocity around BSR depth using OBS data in addition to velocity information from 2D surface seismic data. Four OBSs were deployed and four 20-km shot lines which pass two OBSs respectively were designed. To derive P wave velocity profile, interactive interval velocity analysis using ${\tau}$-p trajectory matching method (Kumar, 2005) was used for OBS data and semblance analysis was used for surface data. The seismic profiles cross the OBS instruments in two different directions yield recordings for four different azimuths. This raised the confidence for the results. All velocity profiles in the vicinity of BSR depth of four OBS sites show almost definite velocity changes which we could consider as upper BSR and free gas layer. Making comparison between velocity from OBS and that from 2D seismic semblance velocity analysis gives consistency in result.

• 한국해양학회지:바다
• /
• 제13권3호
• /
• pp.295-301
• /
• 2008

다중음향측심기에 의한 해저 지형조사는 해양 연구에 기본적인 자료를 제공한다. 지형조사를 위해 수층의 음속을 측정하는데 정확한 수심별 음속 측정은 지형조사 결과에 큰 영향을 미친다. 광역 지형조사 시 공간의 이동에 따라 수층별로 음속의 변화를 일으키는 요인이 발생할 수 있고, 측정 기기별(Sound Velocity Profiler, Conductivity-Temperature-Depth, eXpendable BathyThermograph) 특성에 의해 음속을 달리 측정할 가능성이 있다. 이 연구에서는 음속수직분포도(sound velocity profile)가 달라짐에 따라 발생하는 해저 지형의 변화를 MB-System을 이용하여 비교하였다. 분석 결과 표층의 음속 변화에 비해 수온약층의 음속변화가 획득지형자료에 더 큰 영향을 미치는 것으로 나타났다. 각 기기별로 측정된 음속의 차이는 크지 않았고 해저 지형 결과에 큰 영향을 주지 않은 것으로 나타났다. 해저 지형조사를 위해 위 음속측정기기 중 어떠한 것을 사용하여도 무방하나 해저 지형조사 측선은 수층의 온도변화가 작은 방향으로 선정하는 것이 더 바람직하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.182-187
• /
• 2010

In the various fields of Civil Engineering, shear modulus is very important input parameters to design many constructions and to analyze ground behaviors. In general, a shear wave velocity profile is decided by various experiments before constructing a structure and, analysis and design are carried out by using decided shear wave velocity profile of the site. However, if civil structures are started to construct, the shear wave velocity will be increased more than before constructions because of confining pressure increase by the load of structure. The evaluation of the change in shear wave velocity profile is used very importantly when maintaining, managing, reinforcing and regenerating existing structures. In this study, a non-destructively geotechnical investigation method by using the HWAW method is applied to an evaluation of change in properties of the site according to construction. Generally, the space for experiments is narrow when underground of existing or on-going structures is evaluate, so a prompt non-destructive experiment is required. This prompt non-destructive experiment would be performed by various in-situ seismic methods. However, most of in-situ seismic methods need more space for experiments, so it is difficult to be applied. The HWAW method using the Harmonic wavelet transforms, which is based on time-frequency analysis, determines shear wave velocity profile. It consists of a source as well as short receiver spacing that is 1~3m, and is able to determine a shear wave velocity profile from surface to deep depth by one test on a space. As the HWAW method uses only the signal portion of the maximum local signal/noise ratio to determine a profile, it provides reliability shear modulus profile such as under construction or noisy situation by minimizing effects of noise from diverse vibration on a construction site or urban area. To estimate the applicability of the proposed method, field tests were performed in the change of geotechnical properties according to constructing a minimized modeling bent. Through this study, the change of geotechnical properties of the site was effectively evaluated according to construction of a structure.