• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1171-1187
• /
• 2012

A depth adjustment method for visual fatigue reduction for depth-image-based rendering (DIBR) system is proposed. One important aspect of the method is that no calibration parameters are needed for adjustment. By analyzing 3D image warping, the perceived depth is expressed as a function of three adjustable parameters: virtual view number, scale factor and depth value of zero parallax setting (ZPS) plane. Adjusting these three parameters according to the proposed parameter modification algorithm when performing 3D image warping can effectively change the perceived depth of stereo pairs generated in DIBR system. As the depth adjustment is performed in simple 3D image warping equations, the proposed method is facilitative for hardware implementation. Experimental results show that the proposed depth adjustment method provides an improvement in visual comfort of stereo pairs as well as generating comfortable stereoscopic images with different perceived depths that people desire.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.112-118
• /
• 2014

The depth effect on bending strength of Japanese larch structural lumber was investigated by using the published data of two different depth lumbers with the same length. Depth effect parameters were derived from Weibull's weakest link theory and compared to the results from other researches. Depth effect on bending strength was significant for No.1 and No.3 lumber, but not insignificant for No.2 lumber. Calculated value of the depth effect adjustment factors was 0.21, 0.11 and 0.22 by lumber grade, respectively. These results were similar to those results from previous researches and supported depth effect on bending strength of lumber. An apparent depth adjustment factor has been proposed to 0.2 in the literatures. Based on this study, depth adjustment factor was considered to 0.2 as a conservative optimum design value that should be incorporated in domestic building code (KBC) for structural lumber.

• Journal of Animal Science and Technology
• /
• v.52 no.6
• /
• pp.467-473
• /
• 2010

A total of 4,323,781 records for informal 16 primary linear descriptive traits of dairy cows in Holstein breed from 1988 to 2007 in USA were analyzed to estimate adjustment factors for lactation number and stage. While all factors in the model were highly significant (P < 0.01), major influences on linear type traits were due to lactation number and stage. The frequencies of lactation number 1 through 6 were 58.6, 22.0, 11.8, 4.8, 2.1, and 0.8%, respectively. Further, the frequencies of lactation stage were 0.7, 76.9, 15.3, 4.9, and 2.1%, respectively, for springing, early, medium, late, and dry. To adjust 16 linear traits (stature, dairy form, strength, body depth, rump width, rump angle, legs rear view, leg set, foot angle, fore udder, rear udder height, rear udder width, udder support, udder depth, and front teat placement), additive and multiplicative adjustment factors of lactation number (lactations 2 to 4) and stage (springing, medium, late and dry) were estimated with the solutions in the generalized linear model, assigning lactation 1 and stage early as base class. Additive adjustment factors of lactation number ranged from -1.23 to 2.908, while multiplicative factors ranged from 0.853 to 2.207. Further, additive and multiplicative adjustment factors for lactation stage ranged from -0.668 to 0.785, and from 0.891 to 1.154. Application of adjustment factors to 20 randomly sampled sub-data sets produced the results that additive adjustment factors for both lactation number and stage reduced more mean square of lactation number and stage over 16 linear traits than any combination of adjustments, and leaded additive adjustment factors for both lactation number and stage as a choice of methods for adjustment of informal 16 primary linear type traits collected by classifiers of AI studs.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.408-413
• /
• 2013

Micro-features such as grooves and lenses, which perform optical functions in flat displays, should be manufactured with a good form accuracy because this is directly related to their optical performance. As the size of the display increases, it is very difficult to maintain a high relative accuracy because of the inherent geometric errors such as the waviness of a large-area plate. In this paper, the optical effect of these geometric errors is investigated, and surface-referenced micro-grooving to measure and compensate for such geometric errors on line is proposed to improve the form accuracy of the micro-grooves. A PZT-based fast depth adjustment servo system is implemented in the tool holder to maintain a uniform groove depth in reference to the wavy surface. Through experiments, the proposed method is shown to be an efficient way to produce high-quality micro- grooves on a wavy die surface.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.6
• /
• pp.630-635
• /
• 2014

This study aims to develop a PZT-driven depth adjustment device with a flexure hinge and to investigate its static/dynamic characteristics. This device will be applied to rapidly and accurately trace a flat surface with slight waviness of up to several hundreds of micrometers in magnitude. One typical example is to cut a film coated on a steel plate. A depth control system composed of PMAC, PZT/PZT amplifier, flexure hinge/knife, and laser displacement sensor is implemented on a desktop three-axis machine and an actual cutting test is conducted on a steel workpiece with a sinusoidal-wavy surface. It is verified that the dynamic characteristics of the device limit the maximum cutting speed and depth precision.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.2
• /
• pp.155-167
• /
• 2000

To be presented is two-dimensional chip-load analysis for cutting-load smoothing which is needed in unmanned machining and high speed machining of sculptured surfaces. Cutter-engagement angle and effective cutting depth are defined as chip-loads which are the geometrical measures corresponding to cutting-load while machining. The extreme values of chip-loads are geometrically derived in the line-line and line-arc-line blocks of the two-dimensional NC-codes. AFA(automatic feedrate adjustment) strategy for cutting-load smoothing is presented based on the chip-load trajectories.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.2
• /
• pp.175-183
• /
• 2000

Proposed in this paper is a model-bated AFA (automatic feedrate-adjustment) method for maintaining smooth cutting-loads (i.e., cutting-force) during 2D-profile milling. Before the cutting-force model was established, some assumptions were verified through a series of preliminary cutting experiments (The results found that the curving-force was independent of the cutting speed and the cutting action at the cutter bosom). From the data obtained during the main cutting experiments, a “chip-load/cutting-force model”representing the cutting-force as a function of the chip-load (i.e., effective cutting-depth) and a feedrate is proposed. Based on the model. an AFA scheme for maintaining smooth cutting-force by adjusting the feedrate (i.e., F-code) according to the changes in chip-load was proposed. To check the validity of the proposed AFA scheme. another set of cutting experiments was conducted by using feedrate-adjusted NC-data while monitoring the actual machining processes using an accelerometer. The experimental results showed that the proposed AFA-scheme was quite effective.

• Journal of the Korean Home Economics Association
• /
• v.38 no.5
• /
• pp.55-78
• /
• 2000

The purpose of this project was to provide social adjustment programs for North Korean residents who might migrate into South Korea when free transmigration is allowed in the process of reunification. This study was composed of three parts. First, present social adjustment programs for defectors from North Korea were reviewed. Second, South Koreans attitude toward social adjustment programs for migrated North Koreans in the future was identified based on empirical survey research. Third, the social adjustment programs for migrated North Koreans were discussed from results of the depth interviews which were carried out with 10 North Korean defectors. To support migrated North Koreans' social adjustment in South Korea, this study proposed the first stage village which would have characteristic of group home. Education programs to support social adjustment of migrated North Koreans were developed according to their social adjustment stages. In the middle stage of adjustment model, education programs on living culture in South Korea could be adopted. Education programs related to the various aspects of living culture including consumption, clothing, food, housing, family, child rearing, adolescent education were specified and discussed in detail.

• Korean Journal of Family Social Work
• /
• no.23
• /
• pp.225-262
• /
• 2008

The purpose of this study was to improve the understanding of essential experiences of children of Alcoholism and explore their adjustment process from the children's perspectives. The specific research questions explored in this study were: 1. What was the central phenomenon that children of Alcoholism have experienced? 2. What was the adjustment process of the children of Alcoholism. The grounded theory was adopted in this study to address the research questions. Data was collected through in-depth interviews with eight young adult aged from 18-30 years olds who experienced their parent's Alcoholism. Grounded theory based data analyses resulted in 85 concepts, 30 sub-categories, and 16 categories. The 'causal conditions' influencing the central phenomenon was 'self denial' and 'being suppressed' is the central phenomenon for the children of Alcoholism. The core issue in the process of an adjustment of children from a Alcoholism family was 'accepting the parental Alcoholic problem and re-defining the self', The results of this study suggest that counseling interventions are suggested to improve children's well-being and facilitate their adjustment. Therefore this study has implication on building theory of intervention on the offsprings who have parents of Alcoholism.

• Journal of Korea Water Resources Association
• /
• v.53 no.11
• /
• pp.951-960
• /
• 2020

This study investigates the adjustment processes of the rivers after weir removal through laboratory experiments. Delta upstream eroded rapidly by flow at the initial stage of the experiments and the knickpoint migrates upward. Moreover, the knickpoint moves fast upward on the condition of alternate bars. The head cutting in the bed is developed fast at the initial stage. However, the erosion speed in the bed decreases with time. The well developed alternate bars migrates with keeping their shape downstream, and the bars affect the channel downstream to adjust new environments after weir removal. Maximum scouring depth downstream and the migration speed decrease over time after removing the weir. The scouring depth in the channel without alternate bars migrates with speed. However, the depth in the channel with alternate bars migrates slow downstream. The channel with alternate bars, in turn, is adjusted well to the new equilibrium states. The maximum scouring depth migrates downstream with time, and the scouring depth and its migration speed decreases with time. The dimensionless maximum scouring depth decreases with the migration speed of dimensionless maximum scouring depth because the deeply scoured places capture the sediments from upstream and the migration speed is slow as the places are filled with them. The dimensionless maximum scouring depth is shallow as the dimensionless backfilling speed is high. The dimensionless maximum scouring depth decreases rapidly less than 5 of dimensionless backfilling speed. However, the depth decreases slow more than 5 of it.