• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.425-435
• /
• 1996

The effect of application of dentin bonding agent to the exposed dentin on the intradental nerve activity (INA), dentinal fluid movement and sealing of the dentinal tubules, was investigated in this study. The INA was recorded from the single pulp nerve unit dissected from the inferior alveolar nerve. And specimen of dentin was observed by SEM. Dentinal fluid 'movement through exposed dentin surface was measured before and after the application of dentin bonding agent. 1. Eight Ao-fiber units (conduction velocity: $8.0{\pm}4.0m$/sec) were identified. 4M NaCl evoked an irregular burst of action potentials which ceased immediately after washing. 2. In 4 $A{\delta}$-fiber units, appliction of All Bond 2 completely abolished the INA induced by 4M NaCl. Also, application of Scotchbond Multipurpose(SBMP) totally abolished the INA induced by 4M NaCl in 4 $A{\delta}$-fiber units. 3. Before the application of dentin bonding agent, outward dentinal fluid movement of $10.2{\pm}5.7\;pl{\cdot}s^{-1}{\cdot}mm^{-2}$ was obsered. But after the application of dentin bonding agent the movement of dentinal fluid was stopped. 4. The gap width of 2-$3{\mu}m$ was formed between exposed dentin and adhesive resin in the specimens applied with dentin bonding agents of All Bone 2 and SBMP. But the formation of hybrid layer and the penetration of resin into were dentinal tubules were not clearly observed in interface between dentin and adhesive resin.

• Journal of Periodontal and Implant Science
• /
• 제29권1호
• /
• pp.65-80
• /
• 1999

The purpose of this study was to evaluate the effects of periodontal curet and various rotating instruments on the root surfaces. Thirty-five extracted teeth with advanced periodontal disease were used. They was root planed with periodontal curet, periodontal Perio-Clean bur, periodontal Roto-Perio bur, resin polishing ET bur, and resin polishing diamond fissure bur. To find dentinal tubule orifices on the root surface, tetracycline HCI solution was applied to the one tooth of treated each group. Then, root surfaces were investigated using scanning electron microscope. Amount of loss of cementum was evaluated by loss of tooth substance index. The results were as follows. 1. Groups treated with periodontal curet and Perio-Clean bur showed irregular surface and concavities. Concavities seemed to be lacunae of cementocyte. Other groups treated with Roto-Perio bur, resin polishing ET bur, and resin polishing diamond fissure bur showed partially opened dentinal tubule orifice. 2. Groups treated with periodontal curet and Perio-Clean bur and tetracycline HCl showed irregular surface. No dentinal tubule orifice was seen. Other groups treated with Roto-Perio bur, resin polishing ET bur, and resin polishing diamond fissure bur and tetracycline HCl showed dentinal tubule orifice with various shape and size. 3. Loss of tooth substance indices were compared between groups. There was no statistically difference between periodontal curet and Perio-Clean bur groups. There were statistically differences between periodontal curet and Roto-Perio bur, ET bur, and diamond fissure bur groups. As a result of this study, groups treated with Roto-Perio bur, resin polishing ET bur, and resin polishing diamond fissure bur showed more cementum removed than groups treated with periodontal curet and Perio-Clean bur. Therefore, in a conventional treatment for periodontal disease, it was recommended that periodontal curet or Perio-Clean bur should be used. In a treatment for regeneration of periodontal tissue, it was recommended that Roto-Perio bur, resin polishing ET bur, or resin polishing diamond fissure bur should be used

• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.447-452
• /
• 2017

PURPOSE. To evaluate the sealing performance of Hybrid Coat and its influence on the shear bond strength of five dentin surface cements. MATERIALS AND METHODS. Six premolars were pretreated to expose the dentin surface prior to the application of Hybrid Coat. The microscopic characteristics of the dentinal surfaces were examined with scanning electron microscopy (SEM). Then, 40 premolars were sectioned longitudinally, and 80 semi-sections were divided into a control group (untreated) and a study group (treated by Hybrid Coat). Alloy restoration was bonded to the teeth specimen using five different cements. Shear bond strength was measured by the universal testing machine. The fracture patterns and the adhesive interface were observed using a stereomicroscope. RESULTS. SEM revealed that the lumens of dentinal tubules were completely occluded by Hybrid Coat. The Hybrid Coat significantly improved the shear bond strength of resin-modified glass ionomer cement (RMGIC) and resin cement (RC) but weakened the performance of zinc phosphate cement (ZPC), zinc polycarboxylate cement (ZPCC) and glass ionomer cement (GIC). CONCLUSION. Hybrid Coat is an effective dentinal tubule sealant, and therefore its combined use with resin or resin-modified glass ionomer cements can be applied for the prostheses attachment purpose.

• Journal of Periodontal and Implant Science
• /
• 제25권1호
• /
• pp.24-34
• /
• 1995

The purpose of this study was to compare effects of demineralization of citric acid and tetracycline HCI on periodontally involved root surface. Twelve periodontally involved single rooted teeth were used. After scaling and root planing, root conditioning with citric acid and tetracycline HCI were carried and the teeth were processed scanning electron microscopic observation.The results were as follows: The scaled root surface was covered by much debris and calculus. The effect of demineralization of citric acid and tetracycline HCI was more reduced on scaling group than root planing group, because of hypermineralization of cementum surface and demineralization effect on root surface of tetracycline HCI showed tendency to reduction. The root planed group displayed more smooth root surface than scaling group, the surface was covered by smear layer, thus no exposure of dentinal tubule opening and collagen fiber, especially after root planing, citric acid and tetracycline HCl treated group showed exposure of dentinal tubule and collagen fiber, thus it was thought that new connective tissue attachment could be acquired.

• Journal of Periodontal and Implant Science
• /
• 제27권3호
• /
• pp.469-478
• /
• 1997

The purpose of this study was to evaluate the structural change of root surface and the occlusion of dentinal tubule following $CO_2$ laser treatment. Seven extracted healthy human premolar werw curetted, sectioned, and four specimens were randomly assigned to each of 6 different treatment groups : 1) untreated EDTA etched control: 2) root plande only: 3) $CO_2$ laser treated with 2W mode 6(10msec/pulse, 20pps) for 1 minute: 4) $CO_2$ laser treated with 2W mode 6(lOmsec/pulse, 20pps) for 2 minutes: 5) $CO_2$ laser treated with 2W mode 7(20msec/pulse, 20pps) for 1 minute: 6) $CO_2$ laser treated with 2W mode 7(20msec/pulse, 20pps) for 2 minutes. Following the prescribed treatment, the specimens were prepared for SEM evaluation. Results showed that $CO_2$ laser may be effective to occlude dentinal tubules tor dentin sensitivity treatment. The effect of dentinal tubule occlusion was enhanced with increasing the total energy level lased to specimen regardless of lasing mode. The structural changes of root surfaces were restricted to superficies, and these changes included fissuring, charring, crater formation over the smooth lava like texture. The charring and crater formation implying root damage was observed in the case of the longer duration of a pulse. The results of the present study suggests that the pulsed $CO_2$ laser with shorter pulse duration and longer exposure time can be used effectively in order to obtain the optimal dentinal tubule occlusion with minimal root damage.

• Journal of Periodontal and Implant Science
• /
• 제30권1호
• /
• pp.121-134
• /
• 2000

Root conditioning has introduced to dissolve the smear layer and to produce surface demineralization, resulting to exposure of dentin collagen fibril and opening of dentinal tubules. The purpose of the present study was to examine the effect of different concentration and application time of tetracycline-HCL on root conditioning. Total 40 root specimen were prepared from 20 periodontitis-prone human single rooted tooth. The specimen were treated with tetracycline-HCL solution(20mg/ml, 50mg/ml, 100mg/ml)for 20 sec, 3 min, 5 min., and saline for 30 sec. The application method was rubbing method with cotton pellet. Under the scanning electron microscopy(20KV), the extent of smear removal and opening of the dentinal tubules were examined at x 3000. The following results were obtained. 1. Treatment of root specimen with saline did not remove the smear layer and open the dentinal tubules. 2. Treatment of root specimen with different concentration of tetracycline-HCL for 20 sec also did not remove the smear layer completely. 3. Treatment of root specimen with different concentration of tetracycline-HCL for 3 min opened the dentinal tubules and removed smear layer. 4. Treatment of root specimen with 50mg/ml of tetracycline-HCL for 3 min showed collagen fibril within the opened dentinal tubules. In conclusion, the effect of root conditioning with tetracycline-HCL is more dependent on the application time than the application concentration. Root conditioning with 50mg/ml tetracycline-HCL for 3 min is enough for obtaining the periodontal regeneration.

• Journal of Periodontal and Implant Science
• /
• 제29권4호
• /
• pp.847-863
• /
• 1999

The present study was performed to evaluate the effect of EDTA on diseased root surfaces with regard to the removal of the smear layer, exposure of dentinal tubule openings, and demineralization of the peritubular dentin. 20 periodontally involved single rooted teeth were used. After scaling and root planing, root conditioning was carried out with 3%, 17%, and 24% EDTA solution for 20 sec., 3 min., and 5 min. respectively. Then, the specimens were rinsed with tap water for 5 min. and processed for scanning electron microscopic observation. The following results were obtained. 1. In control group which was conditioned with cotton pellets soaked with saline for 3 min., the surface showed an amorphous irregular coating. The tubule orifices seemed to be com-pressed in the direction of the curette strokes. 2. In test group which was conditioned with EDTA solution, the number of opening dentinal tubules and the extent of the dentinal tubule opening increased with time irrespective of the concentration of EDTA solution. 3. In the group which was conditioned with EDTA solution for 20 sec., the smear layer was not completely removed. 4. If the time of root conditioning is above 3 min., collagen-like fibers covering the circum tubular dentin surface were shown even in the group which was conditioned with 3% EDTA solution. In conclusion, EDTA solution was a very effective root conditioning agent like low pH root conditioning agents which had various disadvantages. Therefore, using EDTA solution, more successful periodontal regeneration could be obtained.

• 한국치위생학회지
• /
• 제18권5호
• /
• pp.843-852
• /
• 2018

Objectives: The study aimed to isolate the abundant bacteria in dental caries in children and to investigate the bacterial species involved in addition to those that have been previously reported. Methods: The specimens were collected from the supragingival plaques of each dental caries area, pit and fissure caries, deep dentinal caries, smooth surface caries, and dental caries, and from healthy subjects in the control group. Bacteria were cultured from these specimens, DNA was extracted from the isolated bacteria, and the 16S rRNA gene sequences were analyzed and identified. Results: Based on the results of the 16S rRNA gene sequence analysis for the 90 strains of dominant bacteria from the 45 specimens, 5, 7, 8, 7, and 13 species were identified from the supragingival plaques from healthy teeth, pit and fissure caries, deep dentinal caries, smooth surface caries, and dental caries, respectively. In healthy teeth, Actinomyces naeslundii dominated. Corynebacterium durum, Ralstonia pickettii, and Streptococcus intermedius showed equal distribution. The dominant bacterial species in dental caries, S. sanguinis, showed the greatest difference in prevalence in pit and fissure caries. In deep dentinal caries, S. mutans and Lactobacillus rhamnosus were dominant; in smooth surface caries, S. mutans and S. sanguinis were dominant; and in the supragingival plaques of dental caries, S. sanguinis and S. mutans were dominant. Conclusions: The bacterial species isolated from dental caries encompassed four phyla, eight genera, and 22 species. In addition, the SS1-2 strain, belonging to the genus Neisseria, was identified as a new species from among the isolated strains.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.45-63
• /
• 1994

128 freshly extracted human molars were used to study the interaction between dentinal smear layer removal with various agents, and the shear bond strength of a light cured glass ionomer cement to dentin. It was proposed that the removal of smear layers using acidic cleaners followed by incorporation of Fe mordant with dentin could enhanced the infiltration of monomer component in light curing glass ionomer cement and resulted in a high bond strength. For the first treatment process for removal of smear layers on the surfaces of dentin, 50 % citric acid, 10% maleic acid and 10 % phosphoric acid were used, and for the second treatment process, 15% ferric chloride, 6.8% ferric oxalate or 30% potassium oxalate were used. Distilled water was used as a control. After double sequential treatment on dentin, a light curing glass ionomer cement was bonded to dentin. After being immersed in water at 31'C for 24 hours, shear bond strengths were measured Instron testing machine(Model No.4202, USA). Surface changes were also observed using SEM (Hitachi, S-2300, Japan) after treatment process with each agents. The following conclusions were drawn : 1. Dentin surface cleaned with maleic acid and treated with ferric oxalate showed the highest bond strength with light curing glass ionomer cement. 2. Bond strengths of glass ionomer cement to dentin treated with maleic acid or citric acid were the highest, and that treated with phosphoric acid showed the lowest. 3. The effect of ferric oxalate on shear bond strength to dentin was always higher than that of ferric chloride. 4. The smear layers were clearly removed and the orifices of dentinal tubules were opened widely by the citric acid, maleic acid and phosphoric acid. 5. The orifices of dentinal tubules opened after using the first solution were closed with the treatment of ferric chloride. 6. The precipitate like crystals were formed on dentin surfaces and tubules, but a significant decrease in bond strength of glass ionomer cement to dentin surface treated with potassium oxalate.

• Journal of Periodontal and Implant Science
• /
• 제32권2호
• /
• pp.303-314
• /
• 2002

This study was performed to evaluate the usability of Er:YAG laser for periodontal therapy. Forty dental root slabs ($5{\times}5{\times}2mm^3$) were prepared from human periodontally diseased extracted teeth and grouped into 4 groups: 1) control (root planing only), 2) root planing and irradiated with laser at 30mJ, 3) root planing and irradiated with laser at 60mJ, and 4) root planing and irradiated with laser at 100mJ. The root slabs were embedded in resin block before laser treatment. Er:YAG laser was irradiated under water irrigation with the tip held perpendicular to the root surface in contact mode. After Er:YAG laser irradiation or planing on the root surface, morphological changes have been observed under SEM, and the micro-hardness and Ca/P ratio were compared. 1. In the Control group, the root surface showed the directional change caused by root planing instrumentation, and the presence of smear layer, and no exposure of dentinal tubule was observed. Laser irradiated group showed surface changes with rough dentin surface of niche and depression and dentinal tubule exposure by the elimination of smear layer. 2. The micro-hardness of root surface in the laser irradiated group was higher than the control group. The higher energy output was applied, the higher micro-hardness on root surface was resulted. 3. The higher energy output was applied, the higher Ca/P ratio was observed. The higher Ca/P ratio in 60mJ group and 100mJ group was statistically significantly compared to the control group and the 30mJ group. These results suggest that Er:YAG laser irradiation on the periodontally diseased root surface could remove smear layer and increase the micro-hardness on root surface and Ca/P ratio which contribute to enhance the acid resistance of periodontally treated root surface.