• International Journal of Oral Biology
• /
• v.42 no.1
• /
• pp.25-31
• /
• 2017

Dental caries is the most common chronic disease in the dental field. Streptococcus mutans (S. mutans) is the most important bacteria in the formation of dental plaque and dental caries. In a previous study, we confirmed that the essential oil of Chrysanthemum boreale has antibacterial activity against S. mutans. Alpha-pinene is one of the major chemical components of Chrysanthemum boreale essential oil. In the present study, we investigated the inhibitory effects of ${\alpha}-pinene$ on cariogenic properties such as growth, acid production, biofilm formation, and bactericidal activity on S. mutans. Alpha-pinene at a concentration range of 0.25-0.5 mg/mL significantly inhibited the growth of S. mutans and acid production of S. mutans. Biofilm formation was significantly inhibited at > 0.0625 mg/mL ${\alpha}-pinene$, similar to the data from scanning electronic microscopy. Under confocal laser scanning microscopy, the bacterial viability was decreased by ${\alpha}-pinene$ in a dose-dependent manner. These results suggested that ${\alpha}-pinene$ may be a useful agent for inhibiting the cariogenic properties of S. mutans.

• Restorative Dentistry and Endodontics
• /
• v.39 no.4
• /
• pp.276-281
• /
• 2014

Objectives: The purpose of this study was to compare the cutting efficiency of a newly developed microprojection tip and a diamond-coated tip under two different engine powers. Materials and Methods: The apical 3 mm of each root was resected, and root-end preparation was performed with upward and downward pressure using one of the ultrasonic tips, KIS-1D (Obtura Spartan) or JT-5B (B&L Biotech Ltd.). The ultrasonic engine was set to power-1 or -4. Forty teeth were randomly divided into four groups: K1 (KIS-1D / Power-1), J1 (JT-5B / Power-1), K4 (KIS-1D / Power-4), and J4 (JT-5B / Power-4). The total time required for root-end preparation was recorded. All teeth were resected and the apical parts were evaluated for the number and length of cracks using a confocal scanning micrscope. The size of the root-end cavity and the width of the remaining dentin were recorded. The data were statistically analyzed using two-way analysis of variance and a Mann-Whitney test. Results: There was no significant difference in the time required between the instrument groups, but the power-4 groups showed reduced preparation time for both instrument groups (p < 0.05). The K4 and J4 groups with a power-4 showed a significantly higher crack formation and a longer crack irrespective of the instruments. There was no significant difference in the remaining dentin thickness or any of the parameters after preparation. Conclusions: Ultrasonic tips with microprojections would be an option to substitute for the conventional ultrasonic tips with a diamond coating with the same clinical efficiency.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.7-19
• /
• 1988

The object of this paper was to investigate the histopatological changes on dog's pulp under cavitation by irradiation of the $CO_2$ laser. The subjects were derived from four dogs, and irradiated 113.23 J/$mm^2$, 283.09 J/$mm^2$, 566.08 J/$mm^2$ in Group I, II, and III respectively. The dogs were sacrificed immediately, 24 hour, 72 hour and 1 week after $CO_2$ laser treatment. For light microscopic examination, routine H-E and PAS stains were employed. For electron microscopic observation, the teeth were fixed in 1% paraformaldehyde and 1% glutaraldehyde, decalcified teeth in 10% EDTA were stained by uranyl acetate and lead citrate. The observation was made with a Hitachi H-500 model electron microscope. The following results were obtained in this study: 1. At the early stage of the experimental sub-groups-immediately, 24 hour, 72 hour samples of Group I, II and III-coagulation necrosis and hyperemia were observed in odontoblastic and subodontoblastic pulpal layer. 2. At the 1 week sub-group of Group I, II, regenerative hyperplasia of the odontoblasts without coagulation necrosis were revealed, in addition to thickened predentin. On he other hand coagulation necrosis and atrophic change accompanying with hyperplasia were found at the 1 week sub-group of Group III. 3. Ultrastructurally, the odontoblasts appeared nuclear degeneration, vacuolar change of cytoplasmic organelles and rupture of plasma membrane at the early stage of the experimental period of all groups. 4. Under spectrohelioscopic examination, regenerative odontobalsts were seen at the 1 week specimens of Group I, II and III. 5. The pulpal response occured at 113-566 J/$mm^2$. The pathologic change of pulp tissue occured at the early experimental period but regeneration of odontoblasts could be seen after 1 week.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.173-178
• /
• 2018

The direct metal laser sintering (DMLS) technique would be promising for the full-arch implant-supported restorations due to reduced cost and manufacturing time without potential human errors and casting defects. The aims of this case report were to describe the successful outcome of an implant-supported fixed dental prosthesis in the edentulous maxilla by using the DMLS technology and computer-aided design and computer-aided manufacturing (CAD/CAM) monolithic zirconia crowns, and to describe its clinical implications. A healthy 51-year-old Korean woman visited Seoul National University Dental Hospital and she was in need of a rehabilitation of her entire maxilla due to severe tooth mobility. In this case, all maxillary teeth were extracted and an implant-supported fixed dental prosthesis was fabricated that involved a cobalt-chromium (Co-Cr) framework with the DMLS technique and CAD/CAM monolithic zirconia crowns. Six months after delivery, no distinct mechanical and biological complications were detected and the prosthesis exhibited satisfactory esthetics and function. In this case report, with the DMLS system, the three-dimensional printed prosthesis was created without additional manual tooling and thus, reliable accuracy and passive fit were obtained.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.4
• /
• pp.316-328
• /
• 2015

Purpose: The objects of this study was to evaluate the accuracy of the dental stone casts made from alginate impressions according to storage condition and stone pouring time. Materials and Methods: Each of upper and lower impressions of dental model was taken. The dental stone models were made immediately, 10, 30, 60, 180, 360 minutes after the impressions were taken at each storage condition. 3D models were constructed by scanning the stone model using 3D laser scanner. With Reference points, positioned on digital models, linear measurements of the dimensional change were compared by 3D metrology software, 3D average models were made and superimposition to identify the specific site of dimensional change and to measure surface deviation (mm). Results: Dental stone models which were made immediately after taking the impression showed the smallest linear dimensional change. As the stone pouring time was prolonged, the linear dimensional change was increased. More than 180 minutes after impression taking, linear dimensional change and surface distortion increased in the posterior molar region, regardless of the storage condition. Conclusion: For the optimum accuracy of the dental stone casts, alginate impression should be poured as soon as possible. If there were a need for storing, a humidor with 100% relative humidity must be used and be stored less than 180 minutes to fabricate the accurate dental model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.1
• /
• pp.53-64
• /
• 2008

Statement of problem: Peri-implant marginal bone loss is an important factor that affects the success of implants in esthetics and function. Various efforts have been made to reduce this bone loss by improving implant design and surface texture. Previous studies have shown that early marginal bone loss is affected by implant neck designs. Purpose: The purpose of this study was to examine the influence of laser microtexturing of implant collar on peri-implant marginal bone loss. Materials and methods: Radiographical marginal bone loss was examined in patients treated with implant-supported fixed partial dentures. Marginal bone level was examined with 101 implant fixtures installed in 53 patients at three periods(at the time of implantation, prosthetic treatment and 6-month after loading). Four types of implants were examined. The differences of bone loss between implants(ITI standard) with enough biologic width and implants(ITI esthetic plus, Silhouette IC, Silhouette IC Laser-$Lok^{TM}$) with insufficient biologic width have been compared. Resorption angles were examined at the time of prosthetic delivery and 6-month after loading. Results and Conclusion: Within the limitation of this study, the following results were drawn. 1. The marginal bone loss of ITI standard and Silhouette IC Laser-$Lok^{TM}$ was less than that of ITI esthetic plus and Silhouette IC(P<0.05). The marginal bone loss between ITI standard and Silhouette IC Laser-$Lok^{TM}$ had no significant statistical difference(P>0.05). There was no significant statistical difference between marginal bone loss of ITI esthetic plus and Silhouette IC(P>0.05). 2. There was no significant difference in marginal bone loss between maxilla and mandible(P>0.05). 3. There was no significant difference in resorption angle among four types of implants(P>0.05). The marginal bone of implants with supracrestal collar design of less than that of biologic width had resorbed more than those with sufficient collar length. The roughness and laser microtexturing of implant neck seem to affect these results. If an implant with collar length of biologic width, exposure of fixture is a possible complication especially in the anterior regions of dentition that demand high esthetics. Short smooth neck implant are often recommended in these areas which may lack the distance between microgap and the marginal bone level. In these cases, the preservation of marginal bone must be put into consideration. From the result of this study, it may be concluded that laser microtexturing of implant neck is helpful in the preservation of marginal bone.

• Imaging Science in Dentistry
• /
• v.40 no.3
• /
• pp.123-129
• /
• 2010

Purpose : To evaluate the effect of surgical treatment of ligature-induced peri-implantitis in dogs using fractal analysis. Also, the capabilities of fractal analysis as bone analysis techniques were compared with those of histomorphometric analysis. Materials and Methods : A total of 24 implants were inserted in 6 dogs. After a 3-months, experimental periimplantitis characterized by a bone loss of about 3 mm was established by inducing with wires. Surgical treatment involving flap procedure, debridement of implants surface with chlorhexidine and saline (group 1), guided bone regeneration (GBR) with absorbable collagen membrane and mineralized bone graft (group 2), and $CO_2$ laser application with GBR (group 3) were performed. After animals were sacrificed in 8 and 16 weeks respectively, bone sections including implants were made. Fractal dimensions were calculated by box-counting method on the skeletonized images, made from each region of interest, including five screws at medial and distal aspects of implant, were selected. Results : Statistically significant differences in the fractal dimensions between the group 1($0.9340{\pm}0.0126$) and group 3($0.9783{\pm}0.0118$) at 16 weeks were found (P<0.05). The fractal dimension was statistically significant different between 8($0.9395{\pm}0.0283$) and 16 weeks in group 3 (P<0.05). These results were similar with the result of the evaluation of new bone formation in histomorphometric analysis. Conclusions : Treatment of experimental peri-implantitis by using $CO_2$ laser with GBR is more useful than other treatments in the formation of new bone and also the tendency of fractal dimension to increase relative to healing time may be a useful means of evaluating.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.465-473
• /
• 2005

The purpose of this study was to evaluate the desensitizing effects of a Nd:YAG laser (Sunlase, SUNRISE Technologies, Inc., USA) irradiation on cervically exposed hypersensitive dentine. 45 patients was irradiated with pulsed Nd:YAG laser (1.5 W, 20 Hz, 75 mJ/pulse, 4 minutes) as the experimental group, 27 patients was mock irradiated as the control group. The degree of sensitivity to the thermal and tactile stimuli were determined qualitatively with an evaporative stimulus defined as two times air blast at a distance of 3 mm from each site to be tested and with a mechanical stimulus as a slightly scratching the cervical site with a dental explorer. A qualitative registration of the degree of discomfort was determined according to a numerical pain scale(NPS) in an 11-point scale in which 0= "no pain" and 10="most excruciating pain imaginable". Recordings were assessed before treatment, immediately after, 1 and 2 weeks after treatment. Pain tolerance threshold and pulp vitality were evaluated with electric pulp tester before and immediately after treatment. 1. Desensitizing of hypersensitive dentine with Nd:YAG laser irradiation was more effective than that with mock irradiation. 2. The placebo effect of mock irradiation was recognized for severe sensitive teeth($NPS\;{\geqq}\;6$), but not for moderate sensitive teeth(NPS < 6). 3. Laser irradiation did not affect the pain tolerance threshold and pulp vitality of the hypersensitive teeth. 4. Desensitizing effect of laser irradiation for the hypersensitive teeth had been continuing at least 2 weeks. It was concluded that desensitizing of hypersensitive dentine with a Nd:YAG laser is effective and the maintenance of the positive result was more prolonged than the placebo effect.

• Journal of Periodontal and Implant Science
• /
• v.27 no.2
• /
• pp.317-328
• /
• 1997

Since laser therapy has been applied to dentistry, many dental practitioners are very interested in laser therapy on various intraoral soft tissue lesions including gingival hyperplasia and aphthous ulcer. The purpose of the present study was to determine the therapeutic effect and the harmful effect of a pulsed-Nd:YAG laser irradiation on human gingival tissue. In twenty periodontal patients with gingival enlargement, the facial gingival surface of maxillary anterior teeth was randomly irradiated at various power of 1.0W(100mJ, 10Hz), 3.0W(100mJ, 30Hz) and 6.0W(l50mJ, 40Hz) for 60 seconds by contact delivery of a pulsed-Nd:YAG laser(EN.EL.EN060, Italy). Immediately after laser irradiation, the gingival tissues were surgically excised and prepared in size of 1mm3. Subsequently the specimens were processed for prefixation and postfixation, embedded with epon mixture, sectioned in $1{\mu}$ thickness, stained with uranyl acetate and lead citrate, and observed under transmission electron microscope(JEM 100 CXII). Following findings were observed; l. In the gingival specimens irradiated with l.OW power, widening of intercelluar space and minute vesicle formation along the widened intercellular space were noted at the epithelial cells adjacent to irradiated area. 2. In the gingival specimens irradiated with 3.0W power, the disruption of cellular membrane, aggregation of cytoplasm, and loss of intercellular space were observed at the epithelial cells adjacent to irradiated area. 3. In the gingival specimens irradiated with 6.0W power, the disruption of nuclear and cellular membrane was observed at the epithelial cells adjacent to irradiated area. The ultrastructural findings of this study suggest that surgical application of a pulsed-Nd:YAG laser on human gingival tissue may lead somewhat delayed wound healing due to damage of epithelial cells adjacent to irradiated area.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.138-145
• /
• 2015

PURPOSE. The objective of this study was to conduct an in vitro comparative evaluation of polished and laser-dimpled titanium (Ti) surfaces to determine whether either surface has an advantage in promoting the attachment of epithelial-like cells and fibroblast to Ti. MATERIALS AND METHODS. Forty-eight coin-shaped samples of commercially pure, grade 4 Ti plates were used in this study. These discs were cleaned to a surface roughness (Ra: roughness centerline average) of 180 nm by polishing and were divided into three groups: SM (n=16) had no dimples and served as the control, SM15 (n=16) had $5-{\mu}m$ dimples at $10-{\mu}m$ intervals, and SM30 (n=16) had $5-{\mu}m$ dimples at $25-{\mu}m$ intervals in a $2{\times}4mm^2$ area at the center of the disc. Human gingival squamous cell carcinoma cells (YD-38) and human lung fibroblasts (MRC-5) were cultured and used in cell proliferation assays, adhesion assays, immunofluorescent staining of adhesion proteins, and morphological analysis by SEM. The data were analyzed statistically to determine the significance of differences. RESULTS. The adhesion strength of epithelial cells was higher on Ti surfaces with $5-{\mu}m$ laser dimples than on polished Ti surfaces, while the adhesion of fibroblasts was not significantly changed by laser treatment of implant surfaces. However, epithelial cells and fibroblasts around the laser dimples appeared larger and showed increased expression of adhesion proteins. CONCLUSION. These findings demonstrate that laser dimpling may contribute to improving the peri-implant soft tissue barrier. This study provided helpful information for developing the transmucosal surface of the abutment.