• The Journal of the Korean dental association
• /
• v.48 no.12
• /
• pp.889-892
• /
• 2010

Botulinum toxin type A (BTX-A), a potent neurotoxin that reversibly blocks presynaptic acetylcholine release, has been applied successfully to treat facial spastic conditions such as blepharospasm, strabismus and cervical dystonia. Since the first reported application in dentistry in 1994, BTX-A has been used with great success to used in the orofacial region to help treat masticatory and facial muscle spasm, severe bruxism, facial tics, and hypertrophy of the masticatory muscles. The clinician may be aware of the many courses becoming available and aimed at dentists to start using it in the cosmetic context. This article intends to provide a basic understanding of the many functional uses of the drug in the orofacial region that may be relevant to everyday practice, especially in orthodontic field.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.4
• /
• pp.11-18
• /
• 2008

The purposes of this study were to examine the effect of 35% Carbamide Peroxide(CP) bleaching agent on the changes in physical and chemical characteristics of tooth. The effect of bleaching agent on enamel was analyzed using Hardness test, SEM and EDS. The microhardness between bleached groups after bleaching showed statistically significant difference according to the paired t-test. The bleached enamel surface showed apparent morphological changes compared to the enamel, which was stored in distilled water only. The difference of the total mineral contents for the distilled water and Carbamide Peroxide did not show statistical significance. These results demonstrated that bleaching using 35% Carbamide Peroxide were adversely affects application time of experimental group and may the safety of using these agents for a short time in dentist-monitored bleaching.

• The Journal of the Korean dental association
• /
• v.55 no.5
• /
• pp.352-357
• /
• 2017

Teeth are made up of three hard tissues, enamel, dentin, and cementum. The dental pulp is the only non-mineralized connective tooth tissue that is surrounded by dentin. The dentin-pulp complex is able to respond to injury by producing hard tissue deposition. However, dentin is considered one of the most difficult tissues to regenerate because of its unique anatomic and physiologic nature. Recently, advances in understanding the applicability of bio-active dentin regenerating proteins are emerging with the development of biological-based therapies using bio-active materials. Dentin defects were regenerated by the deposition of tubular physiologic dentin after application of the bio-active protein in a beagle dog model. Therefore, the bio-active protein may be able to serve as a novel dentin regenerating material and improve symptoms of dentin hypersensitivity.

• The Journal of the Korean dental association
• /
• v.48 no.4
• /
• pp.275-279
• /
• 2010

Dental implant restoration in partial or full edentulous state has become the standard treatment in recent years. Bone graft with guided bone regeneration technique has been regarded as one of the most reliable methods to restore the bone defect area due to periodontal disease or dental trauma. Bone graft materials and membrane are the essential component of guided bone regeneration; however, a variety of bone graft materials confuse us in implant dentistry. Autogenous bone is the recognized standards in implant dentistry owing to its osteogenesis potential. Despite of its disadvantages, grafting autogenous bone is the most reliable methods. Even though the development of new bone grafts materials, autogenous bone is useful in exposed implant thread and total lack of buccal or lingual bone. Allogenic, xenogenic and synthetic bone have the osteoconductive and osteoinductive potential. These materials could be used successfully in self-contained cavity such as sinus cavity and three-wall defects. In this article, application of bone graft material is suggested according to the function of bone graft materials.

• Journal of Korean Dental Science
• /
• v.15 no.2
• /
• pp.101-111
• /
• 2022

The purpose of laboratory tests in the field of oral medicine can be divided into two categories: (1) medical evaluation of patients with systemic diseases that are planning to receive dental care and (2) diagnosis of patients with certain oral diseases. First, laboratory tests are commonly used to evaluate patients with systemic diseases who need dental management. A combination of multiple tests is usually prescribed as a test panel to diagnose and assess a specific disease. Test panels closely related to oral medicine include those for rheumatoid arthritis, connective tissue disease/lupus, liver function, thyroid screening, anemia, and bleeding disorders. Second, laboratory tests are used as auxiliary diagnostic methods for certain oral diseases. They often provide crucial diagnostic information for infectious diseases caused by bacteria, fungi, and viruses that are associated with pathology in the oral and maxillofacial regions. Laboratory tests for infectious diseases are composed of growth-dependent methods, immunologic assays, and molecular biology. As the field develops, further application of laboratory tests, including synovial fluid analysis in temporomandibular joint disorders, salivary diagnostics, and hematologic biomarkers associated with temporomandibular disorders and orofacial pain conditions, is currently under scrutiny for their reliability as diagnostic tools.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.1
• /
• pp.151-159
• /
• 2019

Objective: This study aimed to investigate the relation between rinsing time and the change in enamel surface after fluoride application on the enamel surface. Methods: We recruited two sample groups with different mouth rinsing times. While one group rinsed the teeth immediately after applying acidulated phosphate fluoride (APF) gel, the other group rinsed the teeth 30 minutes after APF gel application. In each group, we performed the following four-step experiment: (i) apply APF gel on the teeth, (ii) rinse the teeth, (iii) immerse the teeth in orange juice, and (iv) measure enamel surface microhardness and scan enamel surfaces. Results: The group that rinsed 30 minutes after treatment exhibited greater microhardness than the group that rinsed immediately after fluoride treatment. The former also showed smooth and regular crystallization, whereas the latter showed rough and damaged crystallization and irregular surfaces. Conclusions: Based on these observations, we conclude that delaying the rinsing time improves the dental caries preventive effect of fluoride.

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.394-401
• /
• 2020

Purpose: The present study is an analysis of the extents of class satisfaction of college students who had applied the design thinking technique to capstone design class. Methods: The experimental method involved an analysis of 122 cases of data where advance and post replies were performed for the subject by students who had applied the design thinking technique and students who had not. The students involved had attended the capstone design class as a junior in the Department of Dental Technology at D University. Results: In the satisfaction with performance process of the capstone design class, five questions among nine had a high positive rating, while all eight questions on the satisfaction with performance methods had a high negative rating. Among ten questions on subjective learning outcomes, six showed a high positive rating. After the application of the design thinking class method, all mean values of the group with the application were higher than the group with no application in satisfaction with performance process, satisfaction with performance method, and subjective class outcomes. Hence, the design thinking class did have positive effects on the students' improvement of class. Conclusion: Based on the results of the study, it is implied that the considerations about diverse class composition methods and operation methods capable of improving the students' satisfaction are needed for efficient operation of the capstone design class.

• The Journal of the Korean dental association
• /
• v.10 no.6
• /
• pp.351-357
• /
• 1972

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.4
• /
• pp.329-336
• /
• 2021

Background: In the field of dentistry, topical anesthetics play an important role in reducing pain during needle pricks. The anesthetic property of betel leaves remain unexplored, even though they have been widely used for the treatment of various ailments. The purpose of this study was to compare and evaluate pain perception following topical application of lignocaine gel, clove gel, ice, and newly developed betel leaf extract gel during intraoral injection in children. Methods: Sixty children aged 6-10 years who met the inclusion criteria were divided into four groups. Topical anesthetic agents, 2% lignocaine (Lox-2% Jelly, Neon, Mumbai, India), 4.7% clove gel (Pain Out Dental Gel, Colgate Palmolive India Ltd, Solan, India), 10% betel leaf extract gel, and ice were applied to each group for one min, followed by administration of infiltration anesthesia. Pain perception was analyzed during needle insertion. The Wong Bakers FACES pain rating scale (WBFPRS) was used for subjective assessment and the Sound, Eye, Motor (SEM) scale for objective assessment. Recorded values were tabulated and subjected to appropriate statistical analysis using SPSS software with a P value set at 0.05. Results: The clove oil and betel leaf groups demonstrated the highest WBFPRS scores, followed by the ice and lignocaine groups. The clove, betel leaf extract, and ice groups showed equal and highest SEM scores, followed by the lignocaine group. The mean WBFPRS and mean SEM scores were statistically significant. Conclusion: Betel leaf extract gel is effective in reducing pain and can act as an alternative topical anesthetic agent.

• The Journal of the Korean dental association
• /
• v.58 no.6
• /
• pp.324-335
• /
• 2020

We investigated whether fluoride varnishes recover the hardness of bovine teeth under 20 days of demineralization/remineralization cycling. The fluoride varnish groups (two commercial fluoride varnishes [V-varnish (Vericom, Korea) and CavityShield (3M ESPE, USA)] and an experimental fluoride varnish including 5 wt.% NaF were compared with a control group without fluoride varnish. Vickers hardness was measured at baseline, 3 days after immersion in caries-inducing solution, 24 hours after application of a fluoride varnish, and after 10 and 20 days of demineralization/remineralization cycling. Afterward, tooth surfaces were observed by scanning electron microscope. After fluoride varnish application and the cycling 10 and 20 days, the experimental varnish group showed the highest hardness, while the CavityShield and the control groups demonstrated the lowest hardness. The experimental varnish group recovered the hardness of the baseline at 24 hours after application of the varnish, while it was recovered after 20 days of the cycling in case of the V-varnish. However, the CavityShield and the control groups did not recover the hardness even after 20 days of the cycling. The experimental fluoride varnish with fast recovery in the hardness of the baseline can be used as an effective fluoride varnish to resist demineralization and to facilitate remineralization.