• Korean Journal of Pharmacognosy
• /
• v.45 no.3
• /
• pp.240-248
• /
• 2014

Gyejibokryeong-hwan (GJBRH) has been used for treatment of patients with climacteric syndrome. In this study, an ultra-performance liquid chromatography-electrospray ionization-mass spectrometer (UPLC-ESI-MS) method was established for the simultaneous quantification of seven marker compounds in GJBRH extract. In addition, we assessed the antioxidant effects of GJBRH. All analytes were separated by gradient elution using two mobile phases on a UPLC BEH $C_{18}$ column and maintained at $45^{\circ}C$. The antioxidant activities of GJBRH were evaluated by measuring free radical scavenging activities on 2,2'-azinobis-3-ethyl-benzothiazoline-6-sulfonic acid (ABTS) and 1-1-diphenyl-2-picrylhydrazyl (DPPH). The inhibitory effects on low-density lipoprotein (LDL) oxidation were evaluated by the formation of thiobarbituric acid relative substances (TBARS) and relative electrophoretic mobility (REM). Regression equations of the seven compounds were acquired with $r^2$ values ${\geq}0.9988$. The amounts of the seven compounds, amygdalin, albiflorin, paeoniflorin, coumarin, cinnamic acid, cinnamaldehyde, and paeonol in GJBRH water extract were 21.71, 2.16, 17.17, 1.97, 0.40, 0.78, and 3.42 mg/g, respectively. The GJBRH showed the radical scavenging activity in a dose-dependent manner. The concentration required for 50% reduction ($RC_{50}$) against ABTS and DPPH radicals were $54.18{\mu}g/mL$ and $79.53{\mu}g/mL$. Furthermore, GJBRH reduced the oxidation properties of LDL induced by $CuSO_4$.

• The Plant Pathology Journal
• /
• v.31 no.4
• /
• pp.379-387
• /
• 2015

Melon necrotic spot virus (MNSV) was recently identified on watermelon (Citrullus vulgaris) in Korea, displaying as large necrotic spots and vein necrosis on the leaves and stems. The average occurrence of MNSV on watermelon was found to be 30-65% in Hapcheon and Andong City, respectively. Four isolates of the virus (MNSV-HW, MNSV-AW, MNSV-YW, and MNSV-SW) obtained from watermelon plants in different areas were non-pathogenic on ten general indicator plants, including Chenopodium quinoa, while they infected systemically six varieties of Cucurbitaceae. The virus particles purified by 10-40% sucrose density gradient centrifugation had a typical ultraviolet spectrum, with a minimum at 245 nm and a maximum at 260 nm. The morphology of the virus was spherical with a diameter of 28-30 nm. Virus particles were observed scattered throughout the cytoplasm of watermelon cells, but no crystals were detected. An ELISA was conducted using antiserum against MNSV-HW; the optimum concentrations of IgG and conjugated IgG for the assay were $1{\mu}l/ml$ and a 1:8,000-1:10,000 dilutions, respectively. Antiserum against MNSV-HW could capture specifically both MNSV-MN from melon and MNSV-HW from watermelon by IC/RT-PCR, and they were effectively detected with the same specific primer to produce product of 1,172 bp. The dsRNA of MNSV-HW had the same profile (4.5, 1.8, and 1.6 kb) as that of MNSV-MN from melon. The nucleotide sequence of the coat protein of MNSV-HW gave a different phylogenetic tree, having 17.2% difference in nucleotide sequence compared with MNSV isolates from melon.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.4-5
• /
• 2010

The surface phonon is defined as a coherent vibrational excitation of surface atoms propagating along the surface. It is characterized by a phonon dispersion curves, which were extensively studied in 1990's using helium atom scattering and high-resolution electron-energy-loss spectroscopy (HREELS)[1].The understanding is mainly based on the theoretical framework of a classical bond model or cluster calculations. The recent sample preparation and first principles calculations open the naval way to deep insight for surface phonon problems. The surface phonon dispersion on the hydrogen-terminated Si(111)-($1{\times}1$) surface [H:Si(111)] is the typical system and already reported experimentally [2] and theoretically [3], although the understandingis incomplete. The sample contaminated by the oxygen atoms on the surface and the calculations were also classical. In this study, firstly, we have prepared an ultra-clean H:Si(111) surface [4] and measured the surface phonon dispersion curvesusing HREELS. Secondly, we have performed first-principles density functional calculations with the projector augmented wave functionals, as implemented in VASP, using generalized gradient approximations. We used aslab of six silicon layers and both top and bottom surfaces were terminated with hydrogen atoms. Finally, we have compared with the surface phonon dispersion of deuterium-terminatedSi(111)-($1{\times}1$) surface[5] and led to our conclusions. The Si-H stretching and the bending modes are observed at 258.5 and 78.2 meV, respectively. These energies are the same as the previously reported values [2], but the energy-loss peaks at the lower energy regions are dramatically shifted. Through this combination study, we have formulated the procedure of preparing ultra-clean H:Si(111)/D:Si(111), which was confirmed by HREELS vibrational analysis. The Si surface will be utilized for further nano-physics research as well as for the materials for nano-fubrication.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.26-33
• /
• 2016

In order to analyze supercritical transition of liquid hydrocarbon fuel which used propulsion engine, visualization of phase changing using Methylcyclohexane (MCH) was performed. Also, measurements of temperature and pressure were conducted to obtain saturation lines of MCH and Decane. delayed increase of the pressure existed near the critical point due to dramatical increase of specific heats and the critical opalescence was only observed from the end point of delaying to the critical point. Beyond the critical point, the boundary between phases disappeared and the strong density gradient was observed. As the comparison between experimental and numerical saturation lines, the numerical estimation for mixture had relatively little difference while the results of pure components had almost coincidence.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.442-450
• /
• 2015

This study was conducted to investigate the effect of Psy-2A-CrtI (PAC), a genetically modified (GM) rice with enhanced ${\beta}$-carotene, on the soil microbial community. The soil used to cultivate GM rice and its wild-type, Nakdong, was analyzed for population density, denaturing gradient gel electrophoresis (DGGE), and pyrosequencing. It was found that the bacterial, fungal and actinomycetes population densities of the PAC soils were within the range of those of the non-GM rice cultivar, Nakdong. The DGGE banding patterns of the GM and non-GM soils were also similar, suggesting that the bacterial community structures were stable within a given month and were unaffected by the presence of a GM plant. The pyrosequencing result showed a temporal difference in microorganism taxon and distribution ratio, but no significant difference between GM and non-GM was found. The persistence of the transgene DNA in the plant and surrounding soil were investigated for different time periods. There were differences in the persistence within the plant depending on the gene, but they could not be detected after 5 weeks. Also the transgenes were not detected in the surrounding soil. These results indicate that soil microbial communities are unaffected by the cultivation of a PAC rice within the experimental time frame.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.44-50
• /
• 2021

Recently, enterprise storage systems that require large-capacity storage devices to accommodate big data have used large-capacity flash memory-based storage devices with high density compared to cost and size. This paper proposes a high-efficiency life prediction method with slope descent to maximize the life of flash memory media that directly affects the reliability and usability of large enterprise storage devices. To this end, this paper proposes the structure of a matrix for storing metadata for learning the frequency of defects and proposes a cost model using metadata. It also proposes a life expectancy prediction policy in exceptional situations when defects outside the learned range occur. Lastly, it was verified through simulation that a method proposed by this paper can maximize its life compared to a life prediction method based on the fixed number of times and the life prediction method based on the remaining ratio of spare blocks, which has been used to predict the life of flash memory.

• Investigative Magnetic Resonance Imaging
• /
• v.25 no.3
• /
• pp.141-155
• /
• 2021

Purpose: To develop a 3D magnetic resonance fingerprinting (MRF) method for application in high resolution knee cartilage PD, T₁, T₂ mapping. Materials and Methods: A novel 3D acquisition trajectory with golden-angle rotating radial in k_xy direction and interleaved echo planar imaging (EPI) acquisition in the k_z direction was implemented in the MRF framework. A centric order was applied to the interleaved EPI acquisition to reduce Nyquist ghosting artifact due to field inhomogeneity. For the reconstruction, singular value decomposition (SVD) compression method was used to accelerate reconstruction time and conjugate gradient sensitivity-encoding (CG-SENSE) was performed to overcome low SNR of the high resolution data. Phantom experiments were performed to verify the proposed method. In vivo experiments were performed on 6 healthy volunteers and 2 early osteoarthritis (OA) patients. Results: In the phantom experiments, the T₁ and T₂ values of the proposed method were in good agreement with the spin-echo references. The results from the in vivo scans showed high quality proton density (PD), T₁, T₂ map with EPI echo train length (N_ETL = 4), acceleration factor in through plane (R_z = 5), and number of radial spokes (N_spk = 4). In patients, high T₂ values (50-60 ms) were seen in all transverse, sagittal, and coronal views and the damaged cartilage regions were in agreement with the hyper-intensity regions shown on conventional turbo spin-echo (TSE) images. Conclusion: The proposed 3D MRF method can acquire high resolution (0.5 mm³) quantitative maps in practical scan time (~ 7 min and 10 sec) with full coverage of the knee (FOV: 160 × 160 × 120 mm³).

• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.81-90
• /
• 2019

In this study, the effects of fracture tensor component and first invariant on block hydraulic behaviors are evaluated in the 2-D DFN(discrete fracture network) systems. A series of regression analysis is performed between connected fracture tensor components and block hydraulic conductivities estimated at every $30^{\circ}$ hydraulic gradient directions for a total of 36 DFN systems having various joint density and size distribution. The directional block hydraulic conductivity seems to have strong relation with the fracture tensor component estimated in direction perpendicular to it. It is found that an equivalent continuum approach could be acceptable for the 2-D DFN systems under condition that the first invariant of fracture tensor is more than 2.0~2.5. The first invariant of fracture tensor seems highly correlated with average block hydraulic conductivity and can be used to evaluate hydraulic characteristics of the 2-D DFN systems. Also, a possibility of upscaling using the first invariant of fracture tensor for the DFN system is addressed through this study.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.88-96
• /
• 2018

Effects of injector position and momentum flux ratio on a vertical jet in a cross-flow field are qualitatively studied and displayed using air and water. The position of the injector hole and the momentum flux ratio is changed and image visualization is performed using a shadowgraph technique and a high-speed camera. The visualized images are compared to find differences in spraying using density gradient magnitude image. It is observed that, as the x/d of the apparatus increases, the jet break-up height decreases. When x/d is 0, the spray reaches the bottom and ceiling at any momentum flux ratio.

• Molecules and Cells
• /
• v.42 no.1
• /
• pp.45-55
• /
• 2019

The liver is involved in a wide range of activities in vertebrates and some other animals, including metabolism, protein synthesis, detoxification, and the immune system. Until now, various methods have been devised to study liver diseases; however, each method has its own limitations. In situ liver perfusion machinery, originally developed in rats, has been successfully adapted to mice, enabling the study of liver diseases. Here we describe the protocol, which is a simple but widely applicable method for investigating the liver diseases. The liver is perfused in situ by cannulation of the portal vein and suprahepatic inferior vena cava (IVC), with antegrade closed circuit circulation completed by clamping the infrahepatic IVC. In situ liver perfusion can be utilized to evaluate immune cell migration and function, hemodynamics and related cellular reactions in each type of hepatic cells, and the metabolism of toxic or other compounds by changing the composition of the circulating media. In situ liver perfusion method maintains liver function and cell viability for up to 2 h. This study also describes an optional protocol using density-gradient centrifugation for the separation of different types of hepatic cells, allowing the determination of changes in each cell type. In summary, this method of in situ liver perfusion will be useful for studying liver diseases as a complement to other established methods.