• 한국건설순환자원학회지
• /
• 제16권4호
• /
• pp.70-73
• /
• 2021

• 대한토목학회논문집
• /
• 제43권1호
• /
• pp.21-32
• /
• 2023

산림지역은 세류간침식이 지배적인 반면, 지표 교란지역은 세류의 발달과 확장에 의한 침식이 두드러지게 증가한다. 본 연구는 급경사에서 세류 발달과 미세지형 변화의 특성을 파악하고자 강우와 유입수 모의에 따른 토양침식 실험을 수행한 것이다. 세류의 단면과 체적, 세류밀도, 세류차수, 세류예도와 같은 미세지형의 특성인자들은 사면의 경사와 위치(상부 또는 하부)에 따른 분석이 이루어졌다. 강우모의에 의해 동시다발적으로 절개된 세류들의 두부침식은 빠른 속도로 상류로 이동하였고, 무작위으로 발달한 세류들은 서로 연결되면서 깊고 넓게 확장하였다. 세류가 하류방향으로 진화함에 따라 횡단면적은 점차적으로 증가하였다. 세류 체적은 유출토사 체적의 약 78 %를 차지하여, 세류침식이 세류간침식보다 토사유출량 기여도가 큼을 확인하였다. 경사가 증가함에 따라 세류차수의 증가는 둔화되지만, 세류의 총길이와 밀도는 전반적으로 증가하였다. 경사 15°에서 20°로 증가하면서 세류의 측벽확장보다 하상절개가 상대적으로 커지면서 세류예도가 1.6배로 증가하였다. 하사면의 유출계수는 상사면보다 12.3 % 적었으며, 이는 세류 확장에 의한 형상 변화와 심토의 노출이 침투를 증가시켰던 것으로 평가된다. 세류가 수반된 토사유출은 경사가 급할수록 전반적으로 증가하지만, 세류진화 과정에서 국부적인 합류와 확장으로 강화된 세류의 수리학적 유속에 직접적인 영향을 받았다.

• 한국인터넷방송통신학회논문지
• /
• 제16권6호
• /
• pp.239-242
• /
• 2016

본 논문에서는 이중 곡률을 갖는 오목 렌즈를 제안하였다. 이중 곡률 렌즈는 HDPE (High Density Polyethylene)를 이용하여 제작하였다. 이중 곡률 렌즈는 두 개의 오목 구조로 구성되었다. 두 개의 오목 구조의 역할은 빔을 균일하게 넓게 보내기 위함이다. 작은 오목 구조는 큰 오목 구조 보다 더 큰 곡률 반경을 갖는다. 이러한 이중 곡률 렌즈는 밀리미터파 이미징 시스템에 적용 가능하다. 제작된 이중 곡률 렌즈를 250 GHz VDI 소스를 이용하여 검증하였다. 광학 시뮬레이션 툴인 ZEMAX를 이용하여 설계하고 제작된 렌즈는 균일한 빔과 확장 성능을 충분히 수행함을 확인하였다.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.29-37
• /
• 2000

The effect of a ceramic ball inclusion on densification behavior of a metal powder compact was investigated under cold isostatic pressing, pressureless sintering and hot isostatic pressing. To simulate those processes, proper constitutive models were implemented into a finite element program (ABAQUS). Measured density distributions of metal powder compacts were also compared with finite element results and showed the same trend with simulated results. Residual stress distributions were calculated by finite element analysis to study the effect of ceramic ball inclusions with different thermal expansion coefficients. The higher residual stress was observed in a metal powder compact when the difference between thermal expansion coefficients for a ceramic ball and metal powder became larger. Samples produced by Wing showed more uniform density distributions and lower residual stresses compared to those by sintering after cold isostatic pressing. For various sizes of ceramic ball inclusions, densification and deformation of powder compacts were also studied during hot isostatic pressing.

• 한국경영과학회지
• /
• 제38권1호
• /
• pp.201-216
• /
• 2013

Diffusion is a basic mathematical tool for modern financial engineering. The theory of the estimation methods for diffusion models is an important topic of the financial engineering. Many researches have been tried to apply the likelihood estimation method for estimating diffusion models. However, the likelihood estimation method for diffusion is complicated and needs much amount of computing. In this paper we develop the estimation methods which are simple enough to be compared to the Euler approximation method, and efficient enough statistically to be compared to the likelihood estimation method. We devise pseudo-likelihood and propose the maximum pseudo-likelihood estimation methods. The pseudo-likelihoods are obtained by approximating the transition density with normal distributions. The means and the variances of the distributions are obtained from the delta expansion suggested by Lee, Song and Lee (2012). We compare the newly suggested estimators with other existing estimators by simulation study. From the simulation study we find the maximum pseudo-likelihood estimator has very similar properties with the maximum likelihood estimator. Also the maximum pseudo-likelihood estimator is easy to apply to general diffusion models, and can be obtained by simple numerical steps.

• 한국세라믹학회지
• /
• 제42권8호
• /
• pp.532-536
• /
• 2005

Thermal shock resistance of structural ceramics is a property that is difficult to quantity, and as such is usually expressed in terms of a number of empirical resistance parameters. These are dependant on the conditions imposed, but one method that can be used is the examination of density, Young's modulus and thermal expansion retention after quenching. For high temperature applications, long-annealing thermal durability, cycle thermal stability and residual mechanical properties are very important if these materials are to be used between $1000^{\circ}C$ and $1300^{\circ}C$. In this study, an excellent thermal shock-resistant material based on $Al_2TiO_5-mullite$ composites of various compositions was fabricated by sintering reaction from the individual oxides and adjusting the composition of $Al_2O_3TiO_2/SiO_2$ ratios. The characterization of the damage induced by thermal shock was done by measuring the evolution of the Young's modulus using ultrasonic analysis, density and thermal expansion coefficients.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.119-125
• /
• 2013

In this paper, semiconducting shield specimens for a DC cable is fabricated and characterized by measurement of volume resistance, tensile strength, and the coefficient of expansion to show the electrical and mechanical characteristics of the semiconducting shield. Due to the PTC phenomenon, the volume resistance at $25^{\circ}C$ increases rapidly in comparison to the volume resistance at $90^{\circ}C$. Since the compounding ratio of carbon black is low, the tensile strength and density become lower and the coefficient of expansion is increased. As the general specification of the tensile strength and density is $0.8kgf/mm^2$ and 150%, respectively, the fabricated specimen in this paper has excellent mechanical characteristic.

• Preventive Nutrition and Food Science
• /
• 제17권3호
• /
• pp.203-209
• /
• 2012

The effects of variable moisture content, screw speed and barrel temperature on the physicochemical properties of red ginseng powder extrudates were investigated. The raw red ginseng powders were processed in a co-rotating intermeshing twin-screw extruder. Primary extrusion variables were feed moisture content (20 and 30%), screw speed (200 and 250 rpm) and barrel temperature (115 and $130^{\circ}C$). Extruded red ginseng showed higher crude saponin contents (6.72~7.18%) than raw red ginseng (5.50%). Tested extrusion conditions did not significantly affect the crude saponin content of extrudates. Increased feed moisture content resulted in increased bulk density, specific length, water absorption index (WAI), breaking strength, elastic modulus and crude protein content and decreased water solubility index (WSI) and expansion (p<0.05). Increased barrel temperature resulted in increased total sugar content, but decreased reducing sugar content in the extrudate (p<0.05). Furthermore, increased barrel temperature resulted in increased amino acid content and specific length and decreased expansion and bulk density of extrudates only at a higher feed moisture content. The physicochemical properties of extrudates were mainly dependent on the feed moisture content and barrel temperature, whereas the screw speed showed a lesser effect. These results will be used to help define optimized process conditions for controlling and predicting qualities and characteristics of extruded red ginseng.

• 한국철도학회논문집
• /
• 제9권3호
• /
• pp.282-290
• /
• 2006

In the current train operation system, large scaled stations like Cheongnyangni and Yongsan are not remote controlled from the central operator but manually by local operator. It is because there are so many entering and exit of trains between depot and mainline which are operating through the large scaled stations and it is very effective to traffic flow on the mainline. Therefore, Kyong Bong Technology Co., Ltd. (KBTech) and Korea Railway Research Institute (KRRI) are continuing the research and development to import 'Autonomous Decentralized System (ADS)'as part of a new train operation control system which is a national policy project of MOCT (Ministry Of Construction & Transportation). The concept of the 'Autonomous Decentralized System (ADS)' has born in 1970's in Japan by the influences of molecular biology. The special features of ADS are being a system that able to do the online expansion, online maintenance and fault tolerance. This thesis introduces the concept of technology of ADS and also describes the system designing & development to apply with large scaled stations.

• 유변학
• /
• 제7권3호
• /
• pp.181-191
• /
• 1995

점탄성유체의 물성치들 중 정압열팽창계수 및 밀도는 자연대류 열전달 연구에 전단 속도 0에서의 점도는 점탄성유체에 대한 모델들 사용 시 필요하다. 본 연구에서는 점탄성유 체이며 마찰 감소 첨가제, 유전자 분리용액동으로 사용하는 Separan AP-273 용액의 정압열 팽창계수, 밀도 및 전단속도 0에서의 점도에대한 농도 및 온도의 영향을 조사하였다. 작동유 체의 물성치들은 10~6$0^{\circ}C$의 온도범위와 100~20,000wppm의 농도범위에서 측정되었다. 작 동유체의 물성치들에 미치는 열주기와 노화의 영향을 조사하기 위해서 정압열팽창계수와 전 단속도 0에서의 점도를 교대로 두 번씩 측정했다. 정압열팽창계수 및 밀도를 측정하는 장치 의 측정 정밀도는 증류수에 대한 측정치와 문헌에 나타난 자료를 비교하여 얻었고 이는 $\pm$ 2%이내였다. Separan AP-273용액의 정압열팽창계수 및 밀도는 증류수의 값들로 대치될수 있다. 작동유체의 정압열팽창계수와 밀도는 열주기와 노화의 영향을 받지 않았다. 낙하식 점 도계를 사용해 측정한 겉보기점도 값들을 나타내느 flow curve에서 전단속도가 0이 되는방 향으로 겉보기점도를 외삽시켜 Separan AP-273용액에 대한 전단속도0에서의 점도를 얻었 다. 정압열팽창계수 측정 전후에 측정한 작동유체에 대한 전단속도 0에서의 점도는 열주기 와 노화로 인해 퇴화되었다.