• 대한의용생체공학회:의공학회지
• /
• 제21권4호
• /
• pp.373-384
• /
• 2000

본 연구의 목적은 체적 변형률 (volumetric strain)에 의한 스폰지 뼈의 밀도를 예측하는 것이다. 스폰지 뼈의 내부에서 유체의 흐름을 고려하기 위하여 각각의 normal strain의 합을 체적 변형률로 정의하였다. 체적 변형률의 경계조건에 대한 민감한 반응은 스폰지 뼈의 밀도를 예측하도록 하였다. 이러한 이론적 배경을 유한요소법 (finite element method)에 적용시켜 대퇴골 (femur)과 척구 (spine)의 스폰지 뼈에서의 밀도를 예측하였다. 예측된 뼈의 밀도는 실험적 데이터와 매우 유사하였다. (Wolff 1892, Keller et al. 1989, Codyet al. 1992). 뼈의 밀도의 함수인 뼈의 탄성계수와 강도 또한 실험적 결과와 매우 유사하였다. (Keller et al. 1989, Carter and Hayes 1977). 본 연구에서 정립된 알고리즘은 스폰지 뼈의 밀도를 예측하는데 있어서 수렴성과 민감성이 우수하였다. 따라서 본 연구의 컴퓨터 알고리즘은 스폰지 뼈의 밀도예측에 있어서 매우 유용한 방법이 될 것이다.

• 한국해안해양공학회지
• /
• 제16권3호
• /
• pp.152-161
• /
• 2004

우리나라 연안 조위자료의 확률밀도함수 형태로 쌍봉형 정규분포 함수 형태를 제안하였다. 빈도분포 해석은 국립해양조사원에서 제공하는 인천, 군산, 목포, 제주, 여수, 마산, 가덕도, 부산, 포항, 속초 검조소의 1시간 간격 조위자료를 사용하였다. RMS 오차 및 결정계수($R^2$) 값을 비교ㆍ분석한 결과, 조위자료의 확률밀도함수로 본 연구에서 제안한 쌍봉형 함수가 기존에 사용하던 정규분포형 함수보다 더 적합한 함수로 파악되었다. 본 연구에서 제안된 함수의 매개변수는 Newton 방법을 수정한 Levenberg-Marquardt 방법으로 추정하였으며, 추정된 매개변수는 분석지점 검조소 자료의 비조화 상수와 밀접한 관계가 있는 것으로 파악되었다.

• 자원환경지질
• /
• 제28권4호
• /
• pp.433-438
• /
• 1995

The most popular minimization method is based on the least-squares criterion, which uses the $L_2$ norm to quantify the misfit between observed and synthetic data. The solution of the least-squares problem is the maximum likelihood point of a probability density containing data with Gaussian uncertainties. The distribution of errors in the geophysical data is, however, seldom Gaussian. Using the $L_2$ norm, large and sparsely distributed errors adversely affect the solution, and the estimated model parameters may even be completely unphysical. On the other hand, the least-absolute-deviation optimization, which is based on the $L_1$ norm, has much more robust statistical properties in the presence of noise. The solution of the $L_1$ problem is the maximum likelihood point of a probability density containing data with longer-tailed errors than the Gaussian distribution. Thus, the $L_1$ norm gives more reliable estimates when a small number of large errors contaminate the data. The effect of outliers is further reduced by M-fitting method with Cauchy error criterion, which can be performed by iteratively reweighted least-squares method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1156-1157
• /
• 2008

The use of the pulsed electro acoustic (PEA) method allowed us to perform the direct observations of spatio-temporal charge distributions in Electric double layer capacitors (EDLCs) based on polarizable nanoporous carbonaceous electrode. The negative charge density became the maximum, about 205 $C/m^3$ at the region where was near to collector layer in EDLCs for case $V_{DC}$ = 2.5 V, while the positively charged density became the maximum, about 61.1 $C/m^3$ at the region where it was located around the cathode layer. The PEA measurement used here is a very useful method to quantitively investigates the spatio-temporal charge distribution in EDLCs.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.183-187
• /
• 2002

In this paper we analyzed the electromagnetic behavior of high $-T_{c}$ superconductor under the quench state using finite element method. Poisson equation was used in finite element analysis as a governing equation and was solved using algebra equation using Gallerkin method. We first investigate d the electromagnetic behavior of U-type superconductor. Finally we applied our analysis techniques to 5.5 kVA meander-line superconducting fault current limiters (SFCL) which are currently developed by many power-system researcher in the world. Meshes of 14,600 elements were used in analysis of this SFCL. Analysis results show that the distribution of current density was concentrated to inner curvature in meander-line type-superconductors and maximum current density 14.61 $A/\m^2$ and also maximum Joule heat was 6,420 W/㎥. We concluded that this meander line-type SFCL was not pertinet fur uniform electromagnetic field distribution.n.

• Smart Structures and Systems
• /
• 제25권6호
• /
• pp.669-678
• /
• 2020

This paper focuses on the free vibration analysis of axially functionally graded (FG) Euler-Bernoulli beams. The material properties of the beams are assumed to obey the linear law distribution. The complexities in solving differential equation of transverse vibration of composite beams which limit the analytical solution to some special cases are overcome using the Differential Transformation Method (DTM). Natural frequencies and corresponding normalized mode shapes are calculated. Validation targets are experimental data or finite element results. Different parameters such as reinforcement distribution, ratio of the reinforcement Young's modulus to the matrix Young's modulus and ratio of the reinforcement density to the matrix density are taken into investigation. The delivered results prove the capability and the robustness of the applied method. The studied parameters are demonstrated to be very crucial for the normalized natural frequencies and mode shapes.

• 대한의용생체공학회:의공학회지
• /
• 제15권2호
• /
• pp.129-134
• /
• 1994

In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Transformation from temporal summation to two-dimensional mappings is formed by 4 nearest point interpolaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality.

• 한국컴퓨터정보학회논문지
• /
• 제27권12호
• /
• pp.161-169
• /
• 2022

최근 들어 모바일 디바이스와 GPS(Global Positioning System)의 발전으로 다양한 위치 기반 서비스(Location-Based Servises, LBS)를 활용할 수 있게 되었다. LBS 사용자는 서비스를 이용하기 위해 자신의 위치 정보를 서비스 제공자에게 노출한다. 이 과정에서 개인의 민감한 정보를 침해할 가능성이 있으므로 사용자의 위치 데이터를 변조하여 프라이버시를 보존할 수 있는 Geo-indistinguishability(Geo-Ind) 기법이 많이 활용되고 있다. 그러나 Geo-Ind 기법으로 인하여 사용자로부터 변조된 데이터를 수집하는 경우, LBS 제공자는 사용자 분포에 대한 정확한 정보를 얻을 수 없다. 그러므로 본 논문에서는 Geo-Ind 기법을 이용하여 사용자로부터 수집한 변조된 위치 데이터로부터 사용자 분포에 대한 정보를 정확하게 계산하기 위한 방법을 제안한다. 특히, Expectation-Maximization(EM) 기법을 이용하여 변조된 데이터로부터 사용자의 위치 분포를 정확하게 예측하기 위한 기법을 제안한다. 또한 실제 데이터를 이용해 제안 기법의 우수성을 입증한다.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.739-745
• /
• 2011

This paper proposes a method for reducing the negative spatial harmonics of the radial flux density of an interior-type permanent magnet (IPM) motor. The reliability of the motor is increased by minimizing its vibrations under dynamic eccentricity (DE) state and normal state due to reduction of a negative spatial harmonics component through the influx of a zero spatial harmonics component in the radial flux density. To minimize the vibrations, optimal notches corresponding to the distribution shape of the magnetic field are designed on the rotor pole face. The variations of vibration computation by finite element method (FEM) and the validity of the analysis and rotor shape design are confirmed by vibration and performance experiments.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.813-816
• /
• 2003

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were applied to Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased, the stronger breakdown strength became at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher. Finally, according to Weibull distribution analysis, reducing breakdown probability of equipment insulation lower than 0.1 % level requires the allowable field intensity values to be kept under 21.5 MV/cm.