• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.162-168
• /
• 1998

The characteristics of demulsification of petroleum emulsion by Streptomyces sp. 8321 were investigated. Demulsification ability of Streptomyces sp. 8321 appeared to be confined within the spores. Spore surface hydrophobicity was increased with culture age stimulating the demulsification ability. Over $1.1{\times}10^8spores/ml$ completely demulsified kerosene-0.2% Triton X-100 (2:1) emulsion. Among the low viscosity hydrocarbons, hydrocarbons with longer chain such as n-hexadecane and diesel were more rapidly demulsified. However, only 20-30% of the emulsion with high viscosity hydrocarbons was demulsified after 24 hours. Oil-in-water emulsions made by Corexit, Finalsol and BP series surfactants were completely demulsified within one minute. Demulsification rate ($t_{1/2}$) of oil-in-water emulsions made by Corexit 7664, 8667, Triton X-100 and Tween 80 decreased as their concentration increased. In case of water-in-oil emulsion made by Seagreen, $t_{1/2}$ was over 24 hours. Therefore, demulsification ability of Streptomyces sp. 8321 was more effective on oil-in-water emulsions.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.653-659
• /
• 2005

When emulsion is irradiated by a microwave, the energy absorbed by the emulsion is proportional to irradiation time. In case of a long exposure, the temperature of emulsion rises, its viscosity decrease, and subsequently increase the rate of demulsification. In this work, in order to improve demulsification rate, the studies on demusification and the Sauter mean diameter ($D_{32}$) for each microwaved emulsion with different irradiation mode(continuous, pulsative, and periodical irradiation) have been carried out. When the 30% W/O emulsion (sample #1) was irradiated for 600 sec and settled for 24 h, oil recovery rates from continuous, pulsative, and periodical microwave irradiation were 60.0%, 62.3%, and 96.2%, and the amounts of separated water were 26.5%, 35.0%, and 93.9%, respectively. Also, the Sauter mean diameters ($D_{32}$) were $47.183{\mu}m$, $111.547{\mu}m$, and $220.476{\mu}m$, respectively.

• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.277-280
• /
• 2017

Destablization and demulsification is a difficult task for the treatment of waste oil-in-water drilling fluid because of its "three-high" characteristics: emulsification, stabilization and oiliness. At present, China is short for effective treating technology, which restricts cleaner production in oilfield. This paper focused on technical difficulties of waste oil-in-water drilling fluid treatment in JiDong oilfield of China, adopting physical-chemical collaboration demulsification technology to deal with waste oil-in-water drilling fluid. After oil-water-solid three-phase separation, the oil recovery rate is up to 90% and the recycled oil can be reused for preparation of new drilling fluid. Meanwhile, harmless treatment of wastewater and sludge from waste oil-in-water drilling fluid after oil recycling was studied. The results showed that wastewater after treated was clean, contents of chemical oxygen demand and oil decreased from 993 mg/L and 21,800 mg/L to 89 mg/L and 3.6 mg/L respectively, which can meet the requirements of grade one of "The National Integrated Wastewater Discharge Standard" (GB8978); The pollutants in the sludge after harmless treatment are decreased below the national standard, which achieved the goal of resource recovery and harmless treatment on waste oil-in-water drilling fluid.

• Clean Technology
• /
• v.19 no.2
• /
• pp.140-147
• /
• 2013

In this study, chemical demulsification and electrical treatment methods were investigated for improving the efficiency of water separation from a water/bitumen emulsion. Two types of motor oils (GS Caltex, Deluxe Gold V 7.5 W/30 and, Hyundai gear oil 85 W/140) were used as model oils in basic experiments to investigate the effects of a demulsifier on water/oil emulsion separation. Chemical demulsifiers showing good water separation performance were then used in asphalt emulsion and bitumen emulsion separation trials. Maleic anhydride and e-caprolactam were shown to be good oil soluble demulsifiers and 2-ethylhexyl acrylate and acrylic acid were effective as water soluble demulsifiers. Based on the results obtained in basic experiments, these four demulsifiers were used in further asphalt emulsion experiments. The oil soluble demulsifiers showed higher water separation efficiencies than the water soluble demulsifiers. To investigate the water separation efficiency using a combined chemical and electrical treatment method, the water/bitumen emulsion was separated with the electrical oil treatment apparatus after a chemical demulsifier had been added to it.

• KSBB Journal
• /
• v.16 no.3
• /
• pp.225-232
• /
• 2001

The hydrophobicity of the microbial cell surface is responsible for the various interactions between microorganisms and different surface, and results in the flocculation of microbial cells, their adhesion to liquid or solid materials, and the floatation of microorganisms at the air-water interface. Accordingly, cell surface hydrophobicity is important not only in medicine but in other areas of biotechnology. This article reviews the role of cell surface hydrophobicity and its applications.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.302-306
• /
• 2002

The chemical analysis and surface chemical properties of biosurfactant formed by Rhodococcus sp. strain IGTS8, which is widely used in biodesulfurization process, in hexadecane/water mixture have been studied. For the chemical analysis, TLC technique was employed. The surface tension, CMC, and emulsion stability of biosurfactant solution were also investigated. The major components of biosurfactant formed by Rhodococcus sp. strain IGTS8 were glucose mycolate and trehalose monomycolate. The CMC of aqueous biosurfactant solution was 0.1 ~0.15 g/100 mL of Water at pH 6.0-6.5 and pH 10~10.5. But the demulsification was faster at pH 10 than at pH 6.3.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2001.11a
• /
• pp.138-145
• /
• 2001

The hydrophobic spores of Streptomyces sp. AA8321 isolated from the Antarctic coast displayed demulsification ability. The aerial spores demulsified an emulsion of kerosene/$0.2\%$ Triton X-100 (2:1, v/v) to $50\%$ and $95\%$ within 1 min contact at the concentrations of $5.0{\times}10^7$ and $1.0{\times}10^8$ spores/ml, respectively. A cold shock protein (csp) gene was cloned from the hydrophobic spore- producing Streptomyces sp. AA8321 using PCR. It encoded a low molecular protein with 68 amino acids showing very low homology with previously reported csp genes. Only the sequence of the first six amino acids was just the same and yet others were different. RNA blot analysis indicated that the csp gene was induced by cold shock, i.e., transferring from $30^{\circ}C$ to $10^{\circ}C$, and this cold shock response proposed that the isolated gene be a new type of csp gene.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.369-372
• /
• 1990

Although the measurement of oil globule size distribution is necessary to detect the process of demulsification, the reasonable methodology for its measurement has not been suggested because the solution of soymilk contains insoluble soybean particle and the protein to interfere with the detection of oil globule or oil content. The oil globule size distribution was measured by the homogeneous suspension and cumulative method under gravitational force or centrifugal force, which were modified with Stokes' low. The geometric mean diameter of oil globules in this soymilk was $033{\mu}m\;and\;031{\mu}m$ under gravitational method and centrifugal method, respectively. The differences of oil globule size distribution in the solutions emulsified by different pressures were detected by this method. The mean diameter of the solutions treated at higher pressure was shifted to smaller size and the distribution pattern of the solutions at higher pressure became more compact around the mean diameter.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.175-179
• /
• 2005

Treatment of Emulsion is very important to development of Bilge Separator for new IMO Regulation. It is too difficult to demulsify the emulsion in the bilge waste water, so we use chemical treatment to break emulsion stability. Broken oil particle is treated by flotation. Bilge Separator on the Ship doesn't have enough time to treat Bilge waste water because of small space in the ship. For the solution to this problem, we experiment to find primary factor as coagulator, pH, and amount of coagulator. As the basis of test, we decided coagulator, pH and quantity of coagulator.

• Clean Technology
• /
• v.15 no.1
• /
• pp.54-59
• /
• 2009

In this study, the separation of water/bitumen emulsion was investigated by chemical demulsification method. Motor oils (GS Caltex Deluxe Gold V 7.5W/30, Hyundai gear oil 85W/140) and asphalt (AP-5, KS M 2201, Dongnam Petrochemical MFG. Co.) were used as model oils in the preliminary experiments to effectively remove water from water/bitumen emulsion. The bitumen extracted from Canadian oilsands was used in this study. The water/oil emulsion was not separated without demulsifiers, and Hyundai motor oil showed higher efficiency of water separation at a low concentration of demulsifier compared with that for GS Caltex motor oil. However, as the concentration increased, the efficiency did not rapidly increase compared with that of GS Caltex motor oil. It was highly speculated that the water phase of Hyundai motor oil was not dispersed well compared with that of GS Caltex motor oil because the viscosity of Hyundai motor oil was much higher than that of GS Caltex motor oil. The demulsifier of higher HLB (hydrophilic - lipophilic balance) value had high separation efficiencies in water/oil emulsion. The TWEEN 20 (polyoxyethylene sorbitan monolaurate solution) showed better separation efficiency than other demulsifiers.