• 대한교통학회지
• /
• 제11권1호
• /
• pp.87-103
• /
• 1993

The subject this paper is the signal control strategy under oversaturated conditions. The nature of traffic control for oversaturation is essentially different from the standard control modes. While under non-saturated situation traffic control is needed for the sake of safety and efficiency, the throughput is essential under oversaturated conditions. Therefore berth objective and strategies differ. For an oversaturated stream the cycle time and the signal offset are thought to be of rather secondary importance. For this case the green split may well be the most important control variable to serve the excessive demand. Up to now, however, most efforts have concentrated on the strategy with the concept which lies just on the extension of Webster's. "Green-split Coordination Strategy for Over-Saturated Networks", presents newly contrived three types of strategies named Forward-coordination, Backward-coordination and Network-coordination respectively and describes the algorithms with the evaluations. The forward coordination strategy treats the forward wave of flow between two signals. The aim is to prevent the outbreak of queue due to the accumulation of temporary excess of demand in near-saturation or saturation flow. The backward coordination strategy treats the backward rave of flow between two signals. The goal is to prevent the waste of green time caused by the exit block at the upstream signal. for this purpose a feedback regulation is provided of the upstream green-split so that the inflow-outflow balance is kept zero. The resultant surplus of green time is alloted to other signal stages. Also here the examination is made of the appropriate value of the feedback control parameter. The network coordination strategy is operated to maximize the network throughput in a specific direction applying a bang-bang control at the bottleneck intersection. This is a type of intervenient control for policy reasons. For this strategy the green-split coordinations, particuarly the backward coordination, are essential as the tactical elements. In order to evaluate the preposed strategies those are compared with the latest existing strategy called saturation-degree-ratio control by the simulation experiments in an assumed 4$\times$4 grid network. The results are satisfactory showing a 10-15% reduction in delays and a 15% increase in network capacity.

• 한국통신학회논문지
• /
• 제38B권10호
• /
• pp.785-800
• /
• 2013

MANET 환경에서 AODV는 요구기반 방식으로써의 장점을 갖지만 다른 라우팅 프로토콜들에 비해 제어 패킷 오버헤드가 크다는 단점도 가지고 있다. 본 논문은 로컬 연결의 탐지와 이웃 목록을 유지하기 위해 주기적으로 브로드캐스트하는 Hello message로 인한 문제점을 개선한다. 주기적인 Hello message는 패킷 전달률과 제한된 대역폭의 효율성을 감소시키고, 제어 패킷 오버헤드를 증가시켜 잔존 에너지량과 네트워크 수명을 감소시킨다. 또한 AODV에서의 주기적인 Hello message는 "Reactive"하지 않은 방식이기 때문에 많은 논쟁의 근원이었다. 이러한 문제점을 개선하기 위해 본 연구에서는 인터럽트 방식을 이용하여 주기적인 Hello message를 제거함으로써 제어 패킷 오버헤드를 줄여 성능을 개선하였다. 기존의 AODV와 제안된 mod_AODV의 성능은 QualNet 5.0을 이용하여 실험 분석하였고, 실험 결과는 시뮬레이션 파라메터들의 변화에 대한 모든 성능 매트릭들에서 mod_AODV가 전반적으로 우수한 성능을 보였다.

• 토지주택연구
• /
• 제15권1호
• /
• pp.135-146
• /
• 2024

본 연구는 대한민국 서남권의 도심항공교통(UAM) 거점환승센터를 광주송정역에 건립하였을 경우 도심항공교통(UAM)의 수단분담률을 예측하는 것이다. 효용함수와 수단선택 로짓모형을 이용한 점 추정방식의 확정적 교통수요 예측모형은 미래의 변동성을 반영하는 못하는 한계점을 지니며 이를 보완하고자 본 연구에서는 효용함수와 몬테카를로 시뮬레이션 분석을 결합하여 확률론적 도심항공교통의 수단분담률을 추정하였다. 도심항공교통의 수단분담률을 결정하는 변수의 확률분포를 가정하여 시뮬레이션 결과 최소 0.07%, 최대 4.7%, 평균 0.95%의 수단분담률로 산출되었다. 수단분담률에 영향을 미치는 주요 영향 요인의 민감도 분석 결과 단위요금, 비용파라미터, 기본요금, 이착륙 시간이 중요 요인으로 나타났으며, 단위요금, 기본요금, 이착륙 시간은 음(-)의 상관관계를 보이는 것으로 나타나 도심항공교통의 이용 활성화를 위해서는 적정 수준의 요금 설정이 중요할 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제50권4호
• /
• pp.419-439
• /
• 2014

In this study, the structural performance of a seven span masonry arch bridge was evaluated. Investigations were performed on Aspendos (Belkis) Masonry Arch Bridge which was located on road of Aspendos Acropolis City in Antalya, Turkey. The old bridge was constructed in the early of fourth century AD, but it was exposed to the earthquakes in this region and the overloading by the river water. The old bridge was severely damaged and collapsed by probably an earthquake many years ago and a new bridge was then reconstructed on the remains of this old bridge by Seljuk in the 13th century. The bridge has also been affected from overflowing especially in the spring of each year, so some protective measures should be taken for this monumental bridge. Therefore, the structural performance under these loading has to be known. For this purpose, an initial finite element model was developed for the bridge and it was calibrated according to ambient vibration test results. After that, it was analyzed for different load cases such as dead, live, earthquake and overflow. Three load combinations were taken into account by deriving from these load cases. The displacements and the stresses for these combination cases were attained and compared with each other. The structural performance of Aspendos Masonry Arch Bridge was determined by considering the demand-capacity ratio for the tensile stress of the mortar used in Aspendos Masonry Arch Bridge. After these investigations, some concluding remarks and offers were presented at the end of this study.

• Coupled systems mechanics
• /
• 제2권1호
• /
• pp.85-110
• /
• 2013

Generally, mass concrete structural behavior is governed by the strain components. However, relevant guidelines in dam engineering evaluate the structural behavior of concrete dams using stress-based criteria. In the present study, strain-based criteria are proposed for the first time in a professional manner and their applicability in seismic failure evaluation of an arch dam are investigated. Numerical model of the dam is provided using NSAD-DRI finite element code and the foundation is modeled to be massed using infinite elements at its far-end boundaries. The coupled dam-reservoir-foundation system is solved in Lagrangian-Eulerian domain using Newmark-${\beta}$ time integration method. Seismic performance of the dam is investigated using parameters such as the demand-capacity ratio, the cumulative inelastic duration and the extension of the overstressed/overstrained areas. Real crack profile of the dam based on the damage mechanics approach is compared with those obtained from stress-based and strain-based approaches. It is found that using stress-based criteria leads to conservative results for arch action while seismic safety evaluation using the proposed strain-based criteria leads to conservative cantilever action.

• 대한임베디드공학회논문지
• /
• 제15권5호
• /
• pp.205-214
• /
• 2020

With the recent development of hardware and software technology, interest in the development of wearable devices is increasing. In particular, wearable devices require algorithms suitable for low-power and low-capacity embedded devices. Among them, there is an increasing demand for a signal compression algorithm that reduces communication overhead, in order to increase the efficiency of storage and transmission of electrocardiogram (ECG) signals requiring long-time measurement. Because normal beats occupy most of the signal with similar shapes, a high rate of signal compression is possible if normal beats are represented by a template. In this paper, we propose an algorithm for determining the normal beat template using the template cluster and Pearson similarity. Also, the template is expressed effectively as a few vertices through linear approximation algorithm. In experiment of Datum 234 of MIT-BIH arrhythmia database (MIT-BIH ADB) provided by Physionet, a compression ratio was 33.44:1, and an average distribution of root mean square error (RMSE) was 1.55%.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.372-374
• /
• 2008

Korea classified into a development country when UNFCCC was concluded in 1995. So Korea doesn't have a GHG reduction duty until 2012. As the UNFCCC is strengthened, recently there is a growing interest in renewable energy and energy usage efficiency improvement for reducing GHG emission. It is associated with CES and renewable energy. CES is a total energy (heat, cooling and power)supplier in aggregated demand zone like a hotel, building, hospital and redevelopment district using CHP and it improves energy usage efficiency. At present, renewable energy is needed for GHG reduction duty but renewable energy doesn't have economic feasibility. So renewable energy is needed various support system to popularize which is a FIT and RPS. Especially RPS is carrying out instead of FIT in many advanced country and it will be inroduced in Korea. RPS is a duty which electricity service provider must guarantee renewable energy as much as specific ratio of total capacity. Therefore this study conducts an economic feasibility estimation of CES considering renewable energy when RPS will introduced in the future.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1998년도 Proceedings of International Workshop on Advanced Image Technology
• /
• pp.165-170
• /
• 1998

This paper presents a new prediction method RBP region-based prediction model where the context used for prediction contains regions instead of individual pixels. There is a meaningful property that RBP can partition a cartoon image into two distinctive types of regions, one containing full-color backgrounds and the other containing boundaries, edges and home-chromatic areas. With the development of computer techniques, synthetic images created with CG (computer graphics) becomes attactive. Like the demand on data compression, it is imperative to efficiently compress synthetic images such as cartoon animation generated with CG for storage of finite capacity and transmission of narrow bandwidth. This paper a lossy compression method to full-color regions and a lossless compression method to homo-chromatic and boundaries regions. Two criteria for partitioning are described, constant criterion and variable criterion. The latter criterion, in form of a linear function, gives the different threshold for classification in terms of contents of the image of interest. We carry out experiments by applying our method to a sequence of cartoon animation. We carry out experiments by applying our method to a sequence of cartoon animation. Compared with the available image compression standard MPEG-1, our method gives the superior results in both compression ratio and complexity.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.795-800
• /
• 2007

In the previous study, a simple but effective analysis procedure, named as an Improved Modal Pushover Analysis (IMPA) was proposed to estimates the seismic capacities of multi-span continuous bridge structures, on the basis of the modal pushover analysis which considers all the dynamic modes of a structure. Differently from other previous studies, IMPA maintains the simplicity of the capacity-demand curve method and also gives a better estimation of the maximum dynamic response of a structure. Nevertheless, its applicability has never been approved for multi-span continuous bridges with large differences in the length of their adjacent piers. This paper, accordingly, concentrates on a parametric study to verify the efficiency and limitation in application of IMPA through a correlation study between various analytical models including the Equivalent Single Degree Of Freedom (ESDOF) and Modal Pushover Analysis (MPA) usually used in the seismic design of structures. Based on the obtained numerical results, this paper introduces a practical guidance and/or limitation for using IMPA to predict the seismic response of a bridge effectively.

• 전력전자학회논문지
• /
• 제23권2호
• /
• pp.101-105
• /
• 2018

Shortage of electric power occurs frequently along with increased electric power demand. ESS is a precaution to solve this issue. Household ESS has a capacity of approximately 3 kW/7 kWh. Household ESS batteries are typically designed with nominal voltages between 40 and 50 V. To connect household ESS with a 220 V AC system, low battery voltages in power conditioning system (PCS) should be boosted. To boost low battery voltage and match it with AC grid voltage, the use of a transformer for a commercial frequency can be considered. To attenuate switching harmonics of the household single-phase ESS-PCS, LC filter can be installed in two positions: on the primary side or on the secondary side of a transformer. A method has been used generally in single-phase inverters for the ESS-PCS. In another method, however, the output efficiency of the ESS-PCS may be decreased. Parasitic components of the transformer can affect voltage losses, when the square wave with the switching frequency in the ESS-PCS is passed through the transformer windings. In this work, the characteristics of the transformer according to the position of an LC filter are investigated for household single-phase ESS-PCS.