• 제목/요약/키워드: delta type

검색결과 998건 처리시간 0.028초

신경회로망을 이용한 큐비클 수배전반의 경보 처리 시스템 개발 연구 - 공동주택 전력설비 중심 - (A study on he Alarm Processing System for Cubicle-type Receiving and Distributing Board using Neural network)

  • 문학룡;류승기;최도혁;홍규장;정찬수
    • 조명전기설비학회논문지
    • /
    • 제12권3호
    • /
    • pp.124-131
    • /
    • 1998
  • 본 논문에서는 건축물의 수배전설비에서 발생하는 경보를 신경 회로망과 고장 진단 지식베이스를 적용하여 감시의 효율을 향상시킬 수 있는 방안을 제시하였다. 제안된 경보 처리시스템은 역전파 알고리즘의 누가 역전파 알고리즘을 이용하여 다중 경보 발생에서 최소 경보요소를 추출하는데 사용하고 추출된 경보는 사전에 정의된 고장진단 지식베이스를 이용하여 셜비 유지보수 정보를 화면에 전개하도록 구성하였다. 제안된 감시기법의 유용 성을 확인하기 위하여 5가지의 가상 시나리오를 통해서 신경 회로망의 적용 가능성을 확인할 수 있었으며, 비전문가라도 설비의 유지관리 업무가 가능하도록 개발되었다.

  • PDF

XLPE 케이블의 전기트리 열화에 따른 전기적 특성 검토 (A Study on the Electrical Properties of Electrical Tree Degradation in XLPE Cable Insulation)

  • 강동식;선종호;이홍식;박정후;조정수
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제49권7호
    • /
    • pp.400-405
    • /
    • 2000
  • In order to improve the reliability of XLPE cables, it is necessary to understand the mechanism of electrical and water tree degradation. Especially, electrical tree initiation and propagation are important in XLPE cable insulation. This paper deals with the changes of electrical properties of XLPE cable insulation with electrical tree degradation. To understand the electrical properties of XLPE insulation, specimens were prepared by 22.9kV distribution cable and made in a type of block. Ogura needles having tip radius of 10${\mu}{\textrm}{m}$ were inserted into each block pieces. AC voltages of 8kV, 10kV and 12kV at 60Hz were applied to needle. We investigated the relationship between electrical properties(PD quantity, tan$\delta$ and DC current) and the growth of electrical tree. The electrical properties of the specimens were measured from initiation of tree to breakdown and their characteristics were analyzed.

  • PDF

볼로미터형 적외선 센서의 신호처리회로 설계 및 특성 (Design and analysis of a signal readout integrated circuit for the bolometer type infrared detect sensors)

  • 김진수;박민영;노호섭;이승훈;이제원;문성욱;송한정
    • 센서학회지
    • /
    • 제16권6호
    • /
    • pp.475-483
    • /
    • 2007
  • This paper proposes a readout integrated circuit (ROIC) for $32{\times}32$ infrared focal plane array (IRFPA) detector, which consist of reference resistor, detector resistor, reset switch, integrated capacitor and operational amplifier. Proposed ROIC is designed using $0.35{\;}{\mu}m$ 2P-4M (double poly four metal) n-well CMOS process parameters. Low noise folded cascode operational amplifier which is a key element in the ROIC showed 12.8 MHz unity-gain bandwidth and open-gain 89 dB, phase margin $67^{\circ}$, SNR 82 dB. From proposed circuit, we gained output voltage variation ${\Delta}17{\};mV/^{\circ}C$ when the detector resistor varied according to the temperature.

Wind effects on a large cantilevered flat roof: loading characteristics and strategy of reduction

  • Fu, J.Y.;Li, Q.S.;Xie, Z.N.
    • Wind and Structures
    • /
    • 제8권5호
    • /
    • pp.357-372
    • /
    • 2005
  • Mean and extreme pressure distributions on a large cantilevered flat roof model are measured in a boundary layer wind tunnel. The largest peak suction values are observed from pressure taps beneath conical "delta-wing type" corner vortices that occur for oblique winds, then the characteristics and causes of the local peak suctions are discussed in detail. Power spectra of fluctuating wind pressures measured from some typical taps located at the roof edges under different wind directions are presented, and coherence functions of fluctuating pressures are also obtained. Based on these results, it is verified that the peak suctions are highly correlated with the conical vortices. Furthermore, according to the characteristics of wind loads on the roof, an aerodynamic solution to minimize the peak suctions by venting the leading edges and the corners of the roof is recommended. The experimental results show that the suggested strategy can effectively control the generation of the conical vortices and make a reduction of 50% in mean pressures and 25% in extreme local pressures at wind sensitive locations on the roof.

Characterization of Carotenoid Biosynthetic Pathway Using Viviparous Mutant Embryos in Maize ( Zea mays L. )

  • Lee, Byung-Moo
    • Plant Resources
    • /
    • 제1권1호
    • /
    • pp.33-37
    • /
    • 1998
  • Carotenoid compounds in embryos of wild-type(WT) and viviparous mutants of maize(Zea mays L.) were analyzed using high performance liquid ehromatography (HPLC) with a photodiode array detector. Zeaxanthin accumulates in WT embryos as the major carotenoid. Phytoene accumulates in vp2 and vp5. Phytofluene in w3 and ${\xi}$-carotene in the vp9 mutant embryos. This indicates that the vp2 and vp5 mutants impair phytoene desaturase from 15-cis-phytoene to 15-cis-phytofluene. The w3 mutant has neither an isomerase from 15-cis-phytofluene to all-trans-phytofuene nor phytofluene desaturase from phytofluene to ${\xi}$-carotene. The vp9 mutant does not have the ${\xi}$-carotene desaturase from ${\xi}$-carotene to lycopene. Our analysis shows that the terminal carotenoid. ${\gamma}$-carotene(${\beta},{\Psi}$-carotene), accumulates in the vp7 mutant embryos. The ${\varepsilon}$-carotene(${\varepsilon},{\varepsilon}$-carotene), a product of ${\delta}$-carotene(${\varepsilon},{\Psi}$-carotene) in some plants, however, has not been found in maize embryos. The vp7 mutant impairs a cyclization step from ${\gamma}$-carotene to both ${\beta}$-carotene and ${\alpha}$-carotene. We suggest that monocyclic ${\gamma}$-carotene is the sole precursor of both bicyclic ${\beta}$-carotene(${\beta},{\beta}$-carotene) and ${\alpha}$-carotene(${\beta},{\varepsilon}$-carotene) in maize.

  • PDF

Specific Isoforms of Protein Kinase G Downregulate the Transcription of Cyclin D1 in NIH3T3

  • Lim, Seon Young;Soh, Jae-Won
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권4호
    • /
    • pp.1165-1169
    • /
    • 2013
  • To elucidate the role of PKG isoforms in transcriptional control of cyclin D1, we employed a series of expression vectors of PKG $1{\alpha}$ and PKG $1{\beta}$ which encode HA-tagged wild type and constitutively active (SD and ${\Delta}N$) mutants. Our present study demonstrates that both the constitutively active mutants of PKG $1{\beta}$ downregulate the transcription of cyclin D1 when transiently transfected in NIH3T3 cells, whereas PKG $1{\alpha}$ mutants show weak inhibition. We further studied the transcriptional regulators of cyclin D1, such as, c-fos, NF-${\kappa}B$, and CRE by using the luciferase reporter assay. Constitutively active mutants of PKG $1{\beta}$ showed marked transcriptional downregulation of c-fos in NIH3T3 cells, whereas PKG $1{\alpha}$ downregulated c-fos to a lesser extent. We also found that the constitutively active mutants of PKG negatively regulated the activation of NF-${\kappa}B$ and CRE, suggesting their involvement in the regulation of cyclin D1.

색각 시표에 따른 시피질 뇌파의 반응 상태 (Response State of EEG Wave Type on Visual Cortex According to Color Vision Target)

  • 김덕훈
    • 한국안광학회지
    • /
    • 제5권2호
    • /
    • pp.5-9
    • /
    • 2000
  • 시유발전위는 시피질 뇌파의 반응을 알 수 있는 전기 생리학적인 검사법이다. 이 검사는 눈의 기능을 타각적으로 검사하는 검사법이다. 본 연구는 색각에 대한 객관적인 검사를 위해 시유발전위를 사용하였다. 검사조건은 거리와 조명의 차이를 다르게 한 상태에서 실시하였다. 피검자는 한국인 성인으로 정상색각자를 대상으로 하였다. 수렴운동 상태에서 색각의 시표적에 따라서 시자극에 관계하는 시피질의 뇌파의 빈도는 델타파가 가장 많고, 다음으로 메타파, 세타파 그리고 알파파의 순으로 나타났다. 뇌파의 진폭에 대한 히스토그램은 거의 비정규분 포곡선을 가지며, 위상 분석에서는 대게 선형을 나타내었다. 시표의 종류에 따른 뇌파의 빈도는 비슷한 결과를 나타내었다.

  • PDF

핀-휜형 방열판의 설계 최적화 (Design Optimization of a Pin-Fin Type Heat Sink)

  • 김형렬;박경우
    • 설비공학논문집
    • /
    • 제15권10호
    • /
    • pp.860-869
    • /
    • 2003
  • Design optimization of the heat sink with 7${\times}$7 square pin-fins is performed numerically using the Computational Fluid Dynamics (CFD) and the Computer Aided Optimization (CAO). In the pin-fins heat sink, the optimum design variables for fin height (h), fin width (w), and fan-to-heat sink distance (c) can be achieved when the thermal resistance ($\theta$$_{j}$) at the junction and the overall pressure drop ($\Delta$p) are minimized simultaneously. To complete the optimization, the finite volume method for calculating the objective functions, the BFGS method for solving the unconstrained non-linear optimization problem, and the weighting method for predicting the multi-objective problem are used. The results show that the optimum design variable for the weighting coefficient of 0.5 are as follows: w=4.653 mm, h=59.215 mm, and c=2.667 mm. In this case, the objective functions are predicted as 0.56K/W of thermal resistance and 6.91 Pa of pressure drop. The Pareto optimal solutions are also presented.re also presented.d.

Optimization of the Data Line Sharing Panel Design for the High Resolution and Large Size LCD

  • Lee, Do-Young;Ji, Ju-Hyun;Koo, Hoe-Woo;Yoo, Ki-Taek;Cho, Suk-Ho;Song, Jae-Hun;Yoo, Sung-Rok;Kim, Jae-Sang;Park, Cheol-Woo;Park, Jae-Hong;Lee, Kyung-Ho
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.1247-1249
    • /
    • 2009
  • We have successfully developed the 22 inch WSXGA+ DLS(Data Line Sharing) Panel driving in 75 Hz. In the large size and high resolution panels, it is very difficult to design the DLS Panels without failure because of the very short charging time and the large signal delay. So, we first investigated the charging order to find the most adequate charging type to the large size and high resolution panels. And then, we optimized the design of DLS in terms of improving the charging properties using the technologies of the Delta-doping TFTs, Cu metal electrodes and optimization of panel design value and the circuit signal timing.

  • PDF

송전용 자기재 현수애자의 원료변화에 따른 특성 연구 (A Study on Properties of Porcelain Suspension Insulator for Transmission Line by a Change of Raw Materials)

  • 최인혁;최장현;이동일;최연규
    • 한국전기전자재료학회논문지
    • /
    • 제17권4호
    • /
    • pp.390-395
    • /
    • 2004
  • In order to analyze the physical and chemical characteristics of home production porcelain insulators by change of the alumina addition amount, 360001bs ball socket type suspension insulators which were manufactured in 1989, 1995 and 2001 removed in transmission line and an experiment was performed. By the result, 8 wt.% alumina that influences the mechanical properties and arc resistance properties in case of insulators that were manufactured in 1989 was contained, and the relative density and the fracture toughness of insulators appeared by 94.2% and 1.4 ㎫$.$ $M^{\frac{1}{2}}$, respectively. However, 12 wt.% alumina was contained in case of insulators that were manufactured in 1995, and the relative density and the fracture toughness of insulators appeared preferably lower by 92% and 1.3㎫$.$ $M^{\frac{1}{2}}$, respectively. Amount of alumina was contained most by 17 wt.% in case of insulators that were manufactured in 2001. It was confirmed that the electrical and mechanical characteristics such as the relative density and the fracture toughness appeared excellently by 96% and 1.7㎫$.$ $m^{\frac{1}{2}}$, respectively.