• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.124-131
• /
• 1998

This paper proposed the alarm processing system to improve the efficiency of monitoring method by applying the neural network and troubleshooting knowledge base for IADAPS(Intelligent Alarm Diagnosis And Processing System) method in an receiving and distributing board of Building complex. This IADAPS is abased on the cumulative generalized delta rule of backpropagation in neural network. It was used to infer the minimum alarms among multi-fired alarms, and the inferred alarm can be displayed maintenance information of facility by using a pre-defined troubleshoot knowledge base. For validating the proposed monitoring method, he method of simulation used to the five case of virtual scenario. As comparison results, a proposed method in this paper could be proved the applied possibility of an neural network and utilized in fields of facilities maintenance, if needed, be operated by non-expertise.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.7
• /
• pp.400-405
• /
• 2000

In order to improve the reliability of XLPE cables, it is necessary to understand the mechanism of electrical and water tree degradation. Especially, electrical tree initiation and propagation are important in XLPE cable insulation. This paper deals with the changes of electrical properties of XLPE cable insulation with electrical tree degradation. To understand the electrical properties of XLPE insulation, specimens were prepared by 22.9kV distribution cable and made in a type of block. Ogura needles having tip radius of 10${\mu}{\textrm}{m}$ were inserted into each block pieces. AC voltages of 8kV, 10kV and 12kV at 60Hz were applied to needle. We investigated the relationship between electrical properties(PD quantity, tan$\delta$ and DC current) and the growth of electrical tree. The electrical properties of the specimens were measured from initiation of tree to breakdown and their characteristics were analyzed.

• Journal of Sensor Science and Technology
• /
• v.16 no.6
• /
• pp.475-483
• /
• 2007

This paper proposes a readout integrated circuit (ROIC) for $32{\times}32$ infrared focal plane array (IRFPA) detector, which consist of reference resistor, detector resistor, reset switch, integrated capacitor and operational amplifier. Proposed ROIC is designed using $0.35{\;}{\mu}m$ 2P-4M (double poly four metal) n-well CMOS process parameters. Low noise folded cascode operational amplifier which is a key element in the ROIC showed 12.8 MHz unity-gain bandwidth and open-gain 89 dB, phase margin $67^{\circ}$, SNR 82 dB. From proposed circuit, we gained output voltage variation ${\Delta}17{\};mV/^{\circ}C$ when the detector resistor varied according to the temperature.

• Wind and Structures
• /
• v.8 no.5
• /
• pp.357-372
• /
• 2005

Mean and extreme pressure distributions on a large cantilevered flat roof model are measured in a boundary layer wind tunnel. The largest peak suction values are observed from pressure taps beneath conical "delta-wing type" corner vortices that occur for oblique winds, then the characteristics and causes of the local peak suctions are discussed in detail. Power spectra of fluctuating wind pressures measured from some typical taps located at the roof edges under different wind directions are presented, and coherence functions of fluctuating pressures are also obtained. Based on these results, it is verified that the peak suctions are highly correlated with the conical vortices. Furthermore, according to the characteristics of wind loads on the roof, an aerodynamic solution to minimize the peak suctions by venting the leading edges and the corners of the roof is recommended. The experimental results show that the suggested strategy can effectively control the generation of the conical vortices and make a reduction of 50% in mean pressures and 25% in extreme local pressures at wind sensitive locations on the roof.

• Plant Resources
• /
• v.1 no.1
• /
• pp.33-37
• /
• 1998

Carotenoid compounds in embryos of wild-type(WT) and viviparous mutants of maize(Zea mays L.) were analyzed using high performance liquid ehromatography (HPLC) with a photodiode array detector. Zeaxanthin accumulates in WT embryos as the major carotenoid. Phytoene accumulates in vp2 and vp5. Phytofluene in w3 and ${\xi}$-carotene in the vp9 mutant embryos. This indicates that the vp2 and vp5 mutants impair phytoene desaturase from 15-cis-phytoene to 15-cis-phytofluene. The w3 mutant has neither an isomerase from 15-cis-phytofluene to all-trans-phytofuene nor phytofluene desaturase from phytofluene to ${\xi}$-carotene. The vp9 mutant does not have the ${\xi}$-carotene desaturase from ${\xi}$-carotene to lycopene. Our analysis shows that the terminal carotenoid. ${\gamma}$-carotene(${\beta},{\Psi}$-carotene), accumulates in the vp7 mutant embryos. The ${\varepsilon}$-carotene(${\varepsilon},{\varepsilon}$-carotene), a product of ${\delta}$-carotene(${\varepsilon},{\Psi}$-carotene) in some plants, however, has not been found in maize embryos. The vp7 mutant impairs a cyclization step from ${\gamma}$-carotene to both ${\beta}$-carotene and ${\alpha}$-carotene. We suggest that monocyclic ${\gamma}$-carotene is the sole precursor of both bicyclic ${\beta}$-carotene(${\beta},{\beta}$-carotene) and ${\alpha}$-carotene(${\beta},{\varepsilon}$-carotene) in maize.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1165-1169
• /
• 2013

To elucidate the role of PKG isoforms in transcriptional control of cyclin D1, we employed a series of expression vectors of PKG $1{\alpha}$ and PKG $1{\beta}$ which encode HA-tagged wild type and constitutively active (SD and ${\Delta}N$) mutants. Our present study demonstrates that both the constitutively active mutants of PKG $1{\beta}$ downregulate the transcription of cyclin D1 when transiently transfected in NIH3T3 cells, whereas PKG $1{\alpha}$ mutants show weak inhibition. We further studied the transcriptional regulators of cyclin D1, such as, c-fos, NF-${\kappa}B$, and CRE by using the luciferase reporter assay. Constitutively active mutants of PKG $1{\beta}$ showed marked transcriptional downregulation of c-fos in NIH3T3 cells, whereas PKG $1{\alpha}$ downregulated c-fos to a lesser extent. We also found that the constitutively active mutants of PKG negatively regulated the activation of NF-${\kappa}B$ and CRE, suggesting their involvement in the regulation of cyclin D1.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.5-9
• /
• 2000

The visual evoked potential was electrophysiological method for the identify of the EEG response on visual cortex. This test was objective test method on the eye function. This study was used the visual evoked potential for the objective color test. The subjects was a normal color function in Korean adults. The test condition was performed on the differens distance and illumination. According to convergence condition of color vision target. On the appearance of EEG wave of visual stimulation on visual cortex. The most EEG wave style was delta wave, and the next amount wave form was beta wave and theta wave, and the least EEG wave form was alpha wave. The histogram of amplitude of EEG wave form was almost non-Gaussian shape, and the phase diagram of amplitude was almost all linear shape. On the kinds of color vision target, the frequency of EEG wave style appeared a similar results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.10
• /
• pp.860-869
• /
• 2003

Design optimization of the heat sink with 7${\times}$7 square pin-fins is performed numerically using the Computational Fluid Dynamics (CFD) and the Computer Aided Optimization (CAO). In the pin-fins heat sink, the optimum design variables for fin height (h), fin width (w), and fan-to-heat sink distance (c) can be achieved when the thermal resistance ($\theta$$_{j}$) at the junction and the overall pressure drop ($\Delta$p) are minimized simultaneously. To complete the optimization, the finite volume method for calculating the objective functions, the BFGS method for solving the unconstrained non-linear optimization problem, and the weighting method for predicting the multi-objective problem are used. The results show that the optimum design variable for the weighting coefficient of 0.5 are as follows: w=4.653 mm, h=59.215 mm, and c=2.667 mm. In this case, the objective functions are predicted as 0.56K/W of thermal resistance and 6.91 Pa of pressure drop. The Pareto optimal solutions are also presented.re also presented.d.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1247-1249
• /
• 2009

We have successfully developed the 22 inch WSXGA+ DLS(Data Line Sharing) Panel driving in 75 Hz. In the large size and high resolution panels, it is very difficult to design the DLS Panels without failure because of the very short charging time and the large signal delay. So, we first investigated the charging order to find the most adequate charging type to the large size and high resolution panels. And then, we optimized the design of DLS in terms of improving the charging properties using the technologies of the Delta-doping TFTs, Cu metal electrodes and optimization of panel design value and the circuit signal timing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.390-395
• /
• 2004

In order to analyze the physical and chemical characteristics of home production porcelain insulators by change of the alumina addition amount, 360001bs ball socket type suspension insulators which were manufactured in 1989, 1995 and 2001 removed in transmission line and an experiment was performed. By the result, 8 wt.％ alumina that influences the mechanical properties and arc resistance properties in case of insulators that were manufactured in 1989 was contained, and the relative density and the fracture toughness of insulators appeared by 94.2％ and 1.4 ㎫$.$ $M^{\frac{1}{2}}$, respectively. However, 12 wt.％ alumina was contained in case of insulators that were manufactured in 1995, and the relative density and the fracture toughness of insulators appeared preferably lower by 92％ and 1.3㎫$.$ $M^{\frac{1}{2}}$, respectively. Amount of alumina was contained most by 17 wt.％ in case of insulators that were manufactured in 2001. It was confirmed that the electrical and mechanical characteristics such as the relative density and the fracture toughness appeared excellently by 96％ and 1.7㎫$.$ $m^{\frac{1}{2}}$, respectively.