• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권5호
• /
• pp.218-225
• /
• 2001

This paper analyses the performance of network system using the CAN(Controller Area Network) protocol. Given messages are assumed to be scheduled by the DMS(Deadline Monotonic Scheduling) algorithm. The mathematical models for time-delay that can be occurred between CAN nodes are defined. The effectiveness of modeling is shown by comparing the difference of time-delay between simulations and practical experiments. We analyse the results according to the variation of factors, such as the number of nodes, the transmission speed, the message size and the number of aperiodic messages through simulation and confirm the real-time performance of lower priority messages. We also investigate the real-time performance of periodic messages when aperiodic message generates.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.111-116
• /
• 2002

The delay of the completion of the construction project occurs frequently because the origin schedule is affected by numerous factors that contribute to the overall delay in completing the project. But in our country. the dealing with a claim is not sufficient yet by reasons of fairl relation between owner and constructor, cognitive shortage in claim, and such. especially they have make a wrong application of baseless the rule. In this study. we make a rational model ; that includes calculating of dispute costs, and suggest the solution and the prevention for claim by considerating the law followed liquidated damages.

• 오토저널
• /
• 제11권6호
• /
• pp.48-56
• /
• 1989

A shock tube technique was developed in which a freely falling droplets column produced by an ultrasonic atomizer was ignited behind reflected shock. In the present study, the effects of turbulent mixing on the ignition delay of a cetane was decided, also, ignition process was investigated. For the purpose of disturbance of droplets column and mixing, authors installed turbulent lattice in shock tube. Usually, the ignition delay is so called Arrhenius plot which found break point in the Arrhenius plot on the high temperature side. The rate of misfiring increased rapidly below 1080K, but ignition took place from 838k and luminous flame was seen to spread over the whole section by turbulent lattice. Length, from end plate to turbulent lattice, was varied with 60,40,20mm. Also, ignition process was detected by Photo transistor. As a result, it was found that physical factors changed ignition delay greatly and turbulent mixing had a considerable effects in the ignition process.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.66-72
• /
• 2006

An accurate knowledge of the AITs(autoignition temperatures) is important in developing appropriate prevention and control measures in industrial fire protection. The measurement of AITs are dependent upon many factors, namely initial temperature, pressure, vessel size, fuel/air stoichiometry, catalyst, concentration of vapor, ignition delay time. The values of the AITs used process safety are normally the lowest reported, to provide the greatest margin of sefety. This study measured the AITs of o-xylene+n-pentanol system from ignition delay time by using ASTM E659-78 apparatus. The experimental AITs of o-xylene and n-pentanol were $480^{\circ}C\;and\;285^{\circ}C$, respectively. The experiment AITs of o-xylene+n-pentanol system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation).

• 한국경영과학회지
• /
• 제22권2호
• /
• pp.99-123
• /
• 1997

Performance analysis of NTT/BT protocol is investigated, which is a GFC (Generic Flow Control) ptotocol in ATM (Asynchronous Transfer Mode ) network and is based on cyclic reset mechanism. THe mean cell delay time is proposed as a performance measure of NTT/BT protocol. The mean cell delay time is defined as the duration from the instant the cell arrives at the transmission buffer until the cell is fully transmitted. The process of cell transmission can be described as a single server queueing modle with two dependent services. By utilizing this model, mean cell delay time is obtained and sensitivity of the factors such as window size and reset period is also analysed.

• 한국시뮬레이션학회논문지
• /
• 제3권1호
• /
• pp.89-98
• /
• 1994

In this paper, a criteria for selecting an appropriate load redistribution algorithm is devised so that a fault-tolerance distributed system can operte at its optimal efficience. To present the guideline for selecting redistributing algorithms, simulation models of fault-tolerant system including redistribution algorithms are developed using SLAM II. The job arrival rate, service rate, failure and repair rate of nodes, and communication delay time due to load migration are used as parameters of simulation. The result of simulation shows that the job arrival rate and the failure rate of nodes are not deciding factors in affecting the relative efficiency of algorithms. Algorithm B shows relatively a consistent performance under various environments, although its performance is between those of other algorithms. If the communication delay time is longer than average job processing time, the performance of algorithm B is better than others. If the repair rate is relatively small or communication delay time is longer than service time, algorithm A leads to good performance. But in opposite environments, algorithm C is superior to other algorithms.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.91-96
• /
• 1994

Intake gases other than air, which is composed of oxygen, nitrogen, carbon dioxide, and argon, are used to study their effects on the performance of the diesel engine experimentally. The engine is operated at constant speed and fixed fuel injection timing, and cylinder pressure and heat release rate are measured at various intake gas compositions. The results show that increase of oxygen concentration improves the performance of the engine generally. The adverse effect is observed when the oxygen concentration is increased over the critical oxygen concentration of this test, mainly because of the over-shortened ignition delay. Increase of carbon dioxide concentration degardes the performance of the engine, mainly due to the lower specific heat ratio of carbon dioxide. Adding argon gas to the intake gas improves the overall performance. Finally, it is found that two most influencing factors affecting the performance of the diesel engine in this study are ignition delay and speific heat ratio of the intake gas.

• Journal of Nutrition and Health
• /
• 제26권4호
• /
• pp.443-454
• /
• 1993

The purposes of this study were to analyze the work patterns of selected hospital foodservices by Work Sampling methodology, and to investigate the relationship among operational factors affecting productivity. The hospitals were classified into 3 groups by the percentage of patient meals, and the percentage of special patient diet, and the menu items of patients meals. The groups clustered were characterized by productivity. Work Sampling methodology was utilized to analyze the work patterns of hospitals with selected 3 hospitals to investigate the productivity the productivity and labor times used in each work functions. Productivity index analyzed by Work Sampling were 10.36 min/meal, 10.95 min/meal, and 12.19 min/meal, respectively X, Y, Z hospital. Z hospital was significantly different from time used in direct work function and delay. Direct work function time was the highest, delay the lowest in Z hospital. The relation between the results of Work Sampling and the productivities of 3 groups showed not by delay but direct work function in the classification used in this study.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.7-13
• /
• 2018

콘크리트 강도는 시멘트, 물, 자갈, 모래 그리고 혼화재 등 내부영향요인뿐만 아니라 실제 현장에서 발생하는 현장기온과 타설지연시간 등 외부영향요인의 영향을 받게 된다. 본 연구의 목적은 콘크리트 배합설계 시 내부영향요인과 외부영향요인을 고려하여 현장 콘크리트 타설시 최적의 콘크리트 강도를 확보하는 것이다. 본 연구에서는 내부영향요인과 외부영향요인에 대한 수준을 정의하고, 모두 24개의 조합에 대한 콘크리트 강도 테스트를 한 후 콘크리트 강도예측 뉴럴 네트워크 모델을 개발했다. 본 콘크리트 강도예측 뉴럴 네트워크 모델은 현장 콘크리트 타설 시 현장기온과 타설지연시간을 고려하여 콘크리트 강도를 예측하는 기능을 제공한다. 본 콘크리트 강도예측 뉴럴 네트워크 모델은 내부영향요인과 외부영향요인을 분석하고 실제 현장에서 콘크리트를 타설할 때 양생온도와 타설지연시간을 뉴럴 네트워크 입력변수로 처리하여 콘크리트 강도를 예측하는 기능을 제공한다. 시공사는 콘크리트 강도예측 결과를 활용하여 콘크리트 배합을 조정함으로써 현장타설 콘크리트 강도를 관리할 수 있을 것이다.

• Clinical and Experimental Pediatrics
• /
• 제59권11호
• /
• pp.440-445
• /
• 2016

Purpose: This study aimed to identify prognostic factors of neurological outcomes, including developmental delay, cerebral palsy and epilepsy in late-preterm and term infants with perinatal asphyxia. Methods: All late-preterm and term infants with perinatal asphyxia or hypoxic-ischemic insults who admitted the neonatal intensive care unit of Inje University Sanggye Paik Hospital between 2006 and 2014 and were followed up for at least 2 years were included in this retrospective study. Abnormal neurological outcomes were defined as cerebral palsy, developmental delay and epilepsy. Results: Of the 114 infants with perinatal asphyxia, 31 were lost to follow-up. Of the remaining 83 infants, 10 died, 56 had normal outcomes, and 17 had abnormal outcomes: 14 epilepsy (82.4%), 13 cerebral palsy (76.5%), 16 developmental delay (94.1%). Abnormal outcomes were significantly more frequent in infants with later onset seizure, clinical seizure, poor electroencephalography (EEG) background activity, lower Apgar score at 1 and 5 minutes and abnormal brain imaging (P<0.05). Infants with and without epilepsy showed significant differences in EEG background activity, clinical and electrographic seizures on EEG, Apgar score at 5 minutes and brain imaging findings. Conclusion: We should apply with long-term video EEG or amplitude integrated EEG in order to detect and management subtle clinical or electrographic seizures in neonates with perinatal asphyxia. Also, long-term, prospective studies with large number of patients are needed to evaluate more exact prognostic factors in neonates with perinatal asphyxia.