• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.149-152
• /
• 1999

A new process for deinking of colored offset newsprint, i.e. enzyme treatment in cooperation with ultrasonic wave was developed in the present study. The physical characteristics such as fiber length, coarseness, crystallinity index of the deinked pulps were investigated and the sugar residues released from the treatment were analyzed. It was found that colored offset newsprint could be deinked effectively by cellulase treatment when ultrasonic wave was applied. The brightness increased by 5% ISO over that of control experiment and the pigment content was reduced markedly. Though the ultrasonic wave had little effect on the strength and crystallinity of the pulp, the treatment of enzyme combined with ultrasonic wave reduced the coarseness and fiber length to some extent. It was also found that ultrasonic wave could accelerate the hydrolysis of cellulose and hemicellulose during the cellulase treatment.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.16-22
• /
• 2008

The pilot scale ultrasonic deinking was carried out in order to confirm the commercialization possibility of ultrasonic deinking. White ledger was used as a raw material and the results were compared to the results obtained from the conventional deinking. The fraction of smaller ink particle was increased and the improved ink removal efficiency was also obtained by the ultrasonic treatment. The brightness and breaking length of ultrasonic deinked pulp were superior to those of the conventional deinked pulp. Most interesting findings in this study were that the significant improvement in effluent quality and the reduction of chemicals and energy cost were obtained by the ultrasonic deinking.

• 펄프종이기술
• /
• 제31권1호
• /
• pp.1-9
• /
• 1999

This study was performed to investigate the deinkability of Korean old newspaper(KONP) and the properties of newsprint made from deinked pulp with some addition of virgin pulp. When the samples of composed of 50% Australian old magazine(AuOMG) and 50% KONP were compared with the samples 50% AuOMG and 50% AuONP, the yield, opacity, strength properties of the former were high, but its brightness was low. When the mixing ratio of AuOMG : AuONP : KONP was 30:20:50, the brightness and strength properties were obtained the similar or better than those obtained samples having other mixing ratio. The brightness and opacity of samples made from deinked pulp with the some addition of TMP and BKP can meet the minium qualifications of brightness and opacity specified by Japanese Industrial Standard. The samples, which DIP, TMP, and KP were mixed with the ratio of the 85:10:5 and 90:5:5, maintained higher brightness and strength comparing to the samples containing higher amount of virgin pulp. Since the newsprint samples made from KONP was not inferior to those from imported old newspaper, the more use of KONP in producing newsprint is recommended.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.44-49
• /
• 2009

Old newspaper was deinked using commercial cellulolytic enzymes and a surfactant complex at low alkalinity. The properties of the deinked pulp(DIP) were evaluated and the suspended solids content, cationic demand, turbidity, and chemical oxygen demand(COD) of the process water were measured. The results can summarized as follows, 1. The brightness and yield of the DIP were improved using enzymatic surfactant complex deinking. 2. The amount of foaming during deinking with the enzyme surfactant complex was higher than that with synthetic surfactant deinking. However, it was not sufficient to cause process problem. 3. The pH and turbidity of the white water from deinking with the enzyme surfactant complex were similar to those of the white water from surfactant deinking. 4. The suspended solids content, cationic demand, and COD of the white water from deinking with the enzyme surfactant complex were improved compared to those of the white water from surfactant deinking.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.381-386
• /
• 2006

Many different types of bleaching chemicals and processes have been globally used for deinked pulp. Besides chlorine-free bleaching chemicals, hydrogen peroxide, and sodium dithionite that could be used without restriction for almost all types of fibers, chlorine-containing chemicals such as chlorine dioxide and sodium hypochlorite have also used throughout the world. Even though hydrogen peroxide is commonly used in newsprint, it could not effectively increase brightness. Experimental evaluation on the possibility of using formamidine sulfinic acid (FAS), a reducing agent, for bleaching a wood-containing deinked pulp has been carried out in this study. The effect of bleaching efficiency for FAS on operational conditions and chemical concentrations compaired to hydrogen peroxide in one and two stages was studied. FAS bleaching showed higher brightness at high temperature and low consistency, and vice versa for peroxide one. Bleaching with sodium silicate and DTPA in FAS and peroxide stage showed better results than cases without them. Sodium silicate and chelant seemed minimize the influence of transition metal ions, including manganese and iron ions, which induce both bleaching agents to decompose. As a result, FAS as a reducing agent seems more effective than hydrogen peroxide for increasing brightness and reducing yellowness. FAS and FAS sequence seemed more efficient than the other two stages of bleaching sequences with regard to the best brightness level obtained. When bleaching was conducted with FAS, COD load was just about one-third compared to peroxide, and brightness stability of the bleached pulp appeared better than peroxide after UV light irradiation.

• 펄프종이기술
• /
• 제32권2호
• /
• pp.40-44
• /
• 2000

A microscopic study was carried out to get the fundamental informations for the ozone deinking technology. The differential interference microscopic observation showed that ozone treatment was helpful to detach the toner ink from the surface of pulp fiber. The modifications of fiber surfaces by ozone treatment were observed with scanning electron microscope. Modification of fiber surfaces was not severe at the early stage of ozone treatment, but it increased with ozone treatment time and pulp consistency, Therefore, it would be possible to improve the properties of deinked pulp by controlling the condtion of ozone treatment.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.50-57
• /
• 1999

This study was carried out to compare a conventional alkaline flotation deinking conditions with neutral deinking conditions with and without enzyme addition with respect to the ink removal efficiency and theflotation deinking filtrate quality such as chemical oxygen demand, cationic demand, suspended solids. Based on ink removal rate the neutral deinking condition without enzyme was better than the alkaline deinking condition, and the neutral deinking with enzyme addition turned out to be the best. The brightness of the deinked pulp was found to be the same trend as the ink removal rate. Flotation reject rate for the neutral deinking condition without enzyme was higher than that of the alkaline deinking condition, but that of the neutral deinking condition with enzyme was lower than that of the alkaline and the neutral deinking condition without enzyme. On the freeness of the deinked pulp, the neutral deinking condition with enzyme had the highest value and the alkaline deinking condition had the lowest value among the conditions tested. On the filtrate of the flotation stage, the cationic polymer demand of the neutral deinking condition with enzyme was much lower than the other conditions. Suspended solids and chemical exygen demand for the neutral flotation deinking filtrate was lower than those of the alkaline flotation deinking filtrate.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.347-350
• /
• 2000

Enzymatic deinking of office-waste paper was studied using crude cellulase and papain-hydrolyzed cellulase from Trichoderma reesei Rut C-30 in small-scale and mid-scale. The results were compared with deinkings using commercial enzyme(Novozym 342) and conventional chemical methods. Maximum brightness and freeness were obtained at 3 units/g Oven Dry Paper(ODP) of CMCase activity using crude cellulase in mid-scale deinking experiments. The deinked pulp had higher physical strength and brightness, and lower freeness and yield than the pulp deinked in small scale. In small scale deinking, maximum brightness and freeness were obtained at 2 unit/g ODP. Deinking by papain-hydrolyzed cellulase showed similar results with one by Novozym 342. It was better in brightness and freeness, but showed lower physical strength and yield, than the conventional deinking by sodium hydroxide. The ratio of endo-1,4-glucanase and exo-1,4-glucanase components in papain hydrolyzed cellulase from T. reesei Rut C-30 was similar to that of commercial enzyme, Novozym 342, implicating a successful application as a deinking enzyme.

• Current Research on Agriculture and Life Sciences
• /
• 제22권
• /
• pp.49-56
• /
• 2004

Cellulolytic enzymes were prepared from alkaline resistant microorganisms which were newly screened from calcic soil. Characteristics of enzymes and enzymatic deinking efficiency of wastepaper were investigated. The results were summarized as fellows: 1. The recovery rate of crude enzyme was 93.7% in Bio-B and 57.4% in Bio-F. 2. The protein content in crude enzymes was lowest and the thermal stability of crude enzymes was highest in Bio-F. 3. The brightness gain of Bio-F deinked pulp was best in ONP and Bio-B deinked pulp was best in MOW. 4. The reject yield was increased with enzymatic deinking flotation process. 5. The residual ink area of paper was increased with enzymatic deinking and large size of ink particles were remained in paper.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.5-14
• /
• 2015

Recently, the use of wood resources has been limited due to global environmental change, like global warming and desertification. It is very critical in Korea's paper industries because lots of virgin pulp are dependant on direct import from abroad for printing grade of paper. In this work, the alternatively best available technique for reducing the import amounts of BKP (bleached Kraft pulp) was considered by mixing DIP (deinked pulp) and TMP (thermomechanical pulp) for the manufacture of high quality paper. Generally known, the sheet prepared from fibrous raw materials of DIP and TMP has lower strength and optical properties than that prepared from BKP. This study was aimed to improve the sheet quality by using DIP and TMP. 4 kinds of polyelectrolytes were approached to find out the best effects on physical strength and optical brightness improvements, and high retention behaviors with GCC (ground calcium carbonate). In conclusion, amphoteric PAM with 1,000,000 molecular weight (g/mol) and 0.5 charge density (meq/g) was best for the improvement of strength properties with the mixture of DIP and TMP. GCC retention rate was also the highest with cationic-PAM of above 2,000,000 molecular weight (g/mol) and about 2.0-3.0 charge density (meq/g) of strengthening agent.