• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.922-930
• /
• 1995

• 한국식품영양과학회지
• /
• 제10권1호
• /
• pp.53-60
• /
• 1981

열풍에 의한 표고버섯의 건조현상을 속도론적으로 규명하기 위해서 건조속도를 좌우하는 두 가지 인자에 대해서 그 영향을 고찰한 후 선정된 조건에서 건조곡선 및 건조속도식을 유도하였다. 일정 풍속(1.5m/sec)하에서 온도의 변화$(45{\sim}55^{\circ}C)$를 주었을 때 수분의 감소는 지수함수적으로 감소하였으며 감소율은 온도가 높을수록 더욱 높았다. 온도를 $(45^{\circ}C)$로 고정시키고 풍속의 변화$(1.0{\sim}3.1m/sec)$를 주었을 때 2m/sec까지는 풍속이 빠를수록 건조속도가 높아졌으나, 그 이상의 풍속에서는 오히려 건조속도가 감소하였다. 따라서 풍속은 2m/sec에서 가장 건조속도가 높았다. 선정된 온도 $50^{\circ}C$, 풍속 2m/sec, 습도 38-41%의 조건에서 건조곡선 및 건조속도식을 유도하여 본 결과 $X=6.94e^{-0.345t}$와, $dx/dt=-2.39e^{-0.345t}$라는 Kinetic model 이 얻어졌다.

• 한국식품과학회지
• /
• 제47권6호
• /
• pp.744-750
• /
• 2015

Purple sweet potatoes were dehydrated with maltodextrin with different dextrose equivalent (DE) values of 4-7, 13-17, 16.5-19.5, and 17-20. Maltodextrin was used as a molecular press dehydrating agent. The molecular dehydration rate of the purple sweet potatoes increased over time. As the DE of maltodextrin increased, the moisture content after 12 h of dehydration decreased from 65.7% to 40.8, 36.1, 34.9, and 28.6% for DE values of 4-7, 13-17, 16.5-17.5, and 17-20, respectively. Additionally, total phenolic content, anthocyanin, and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities decreased as the DE value of maltodextrin increased. While maltodextrins with DE values of 16.5-19.5 and 17-20 effectively dehydrated the purple sweet potatoes, total phenolic, anthocyanin, and DPPH radical scavenging activities were lowered during dehydration. The DPPH radical scavenging activities correlated to both the total phenolic content ($r^2=0.96$) and anthocyanin contents ($r^2=0.95$) of the purple sweet potatoes. These results indicate that the purple sweet potatoes were effectively dehydrated with maltodextrin whose DE values ranged 16.5-20, although there were losses in the total phenolic and anthocyanin contents.

• Preventive Nutrition and Food Science
• /
• 제8권3호
• /
• pp.230-234
• /
• 2003

Mass transfer characteristics during osmotic dehydration of carrots were studied as functions of immersion temperature and time, and sugar and salt concentrations. The effect of osmotic dehydration on the degree of browning of air-dried carrots was also evaluated. Increasing the immersion temperature and time, sugar concentration, and salt addition increased water loss, sugar gain, molality and rate of dehydration. The water loss and increases in solids, and molality were rapid in the beginning of the process and then increased slowly during remainder of the process. Increasing 1 or 2% salt concentration in the 40$^{\circ}$Brix sugar solution at 6$0^{\circ}C$ increased water loss and solid gain. Salt addition was not able to significantly affected on water loss and solid gain compare to temperature (40～8$0^{\circ}C$) and sugar concentration (20～60$^{\circ}$Brix) changes due to the low salt concentration. A minimum degree of browning of the air-dried carrots (O.D. = 0.048) could be achieved using binary solutions (40$^{\circ}$Brix sugar solution with 2% salt addition) with 24 min of immersion time compared to control (O.D. = 1.308) or blanching with 24 min of immersion time (O.D. = 0.174).

• 한국식품영양과학회지
• /
• 제26권5호
• /
• pp.866-871
• /
• 1997

This study was carried out to determine the effect of osmotic dehydration as pretreatment on the qualities of dried cherry-tomatoes. The weight reduction and solid gain in osmosed cherry-tomato were increased by increasing sugar concentration, immersion temperature and time; among three parameters, the immersion temperature affected more than sugar concentration and immersion time did. The moisture content was decreased as increasing sugar concentration, immersion temperature and time, and it was the lowest at the osmotic conditions of 7$0^{\circ}C$, 60$^{\circ}$Brix and 11hr. To determine the optimum processing condition by RSm, the polynomial optimum models were established. The regression models was significant (p<0.05). It was used contour plots to optimize osmotic dehydration. The optimum condition for osmotic dehydration as pretreatments for drying of cherry-tomatoes were immersion temperature of 47~53$^{\circ}C$, sugar concentration of 39~43$^{\circ}$Brix, and immersion time of 7hr, in which process conditions were 78~86% moisture content, 8.5~10$^{\circ}$Brix sugar content and 80~86% weight reduction.

• 복식문화연구
• /
• 제10권5호
• /
• pp.578-589
• /
• 2002

The purpose of this research was to analyze the residual water retention and to determine the number and species of microorganisms from the wet cotton fabrics in dehydration and drying process during washing. The drying rates of terrycloth and interlock knit under the rainy seasons were measured according to the dehydration and hanging methods, layers of fabric and pre-treatment agents. Microorganisms were isolated from the dried terrycloth by pure culture, and were identified by Biolog system. The results are as follow: The initial water retention of fabrics after dehydration decreased in the order of dripping>centrifuge>squeezing method, which affected the drying rate. The drying rates were faster by increasing surface area of fabrics. There was no significant difference in drying rate among the fabrics pre-treated with detergent, or fabric softener, or cationic surfactants such as Cetyltrimethylammonium bromide(CTAB) and Benzalkonium chloride(BC). Puedomonas aureginosa was found in the fabrics treated with a powder-type detergent. On the other side, there was no growth of microorganism in the fabrics treated with a liquid-type detergent (containing antibacterial agent), CTAB and BC.

• 한국산업융합학회 논문집
• /
• 제23권4_2호
• /
• pp.569-581
• /
• 2020

Since the dehydration packages of offshore plant deal directly with oil & gas, there is a great risk of fire and explosion during operation. Therefore, this study performed risk assessment through HAZard & OPerability (HAZOP) for solid desiccant dehydration package that can remove water component of natural gas in offshore floating liquefied natural gas (LNG) production facilities below 0.1 ppmv. The risk matrix was determined by dividing the likelihood and the severity into five levels separately by asset, life, environment and reputation. The piping & instrumentation diagram (P&ID) of the dehydration package was divided into 9 nodes. Total 22 deviations were assessed in consideration of the adsorption and desorption conversion cycle. A risk assessment based on deviations revealed 14 major hazards. Three representative types of hazards were open/close failure of the control valve, control failure of the heater, and abnormal operation of the regeneration gas cooler. Finally, we proposed the installation of additional safety devices to improve safety against these major hazards, such as safety instrumented functions, alarms, etc.

• 산업기술연구
• /
• 제4권
• /
• pp.43-46
• /
• 1984

In process of water removing safely from plastic clay, an electric field applied to a wet, porous solid such as day usually causes the rapid dehydration. The water-bearing positive ions move to negative electrode under the d. c. electrical stress or field. Therefore application of electro-osmosis to wet clay could include drying thick and large-scale ceramic body quickly and evenly. The d. c. power supply unit to 60 volts is necessary for safe practice. Also wider contact area and shorter distance between electrodes accelerate effectively the removal of water.

• 한국세라믹학회지
• /
• 제24권4호
• /
• pp.307-312
• /
• 1987

The investigation has been performed to study thermal dehydration of Song-sug, Pyung-il-do and Chung-mu diapore in Korea. Thermal analysis of Korean diaspore showed two steps of dehydration by dispore and kaolinite. The activation energy of dehydration reation of each diaspore was calculated by kissinger's method, and the results obtained were 63.608, 37.867 and 54.885Kcal/mol, respectively.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1107-1112
• /
• 1997

Mn-Zn ferrite powders prepared by an alcoholic dehydration method. Vacuum casting, a kind of wet forming process was examined with this powders. As binders, polyethylene glycol and polyvinyl alcohol were used. In order to estimate this conditions, fracture morphology, densities of green and sintered bodies and the microstructure were observed. High density and homogeneous microstructure in sintered bodies were obtained in the case of 0.1 wt% PEG or 0.5 wt% PVA.