• 자원환경지질
• /
• 제34권1호
• /
• pp.147-156
• /
• 2001

티탄자철석(titanomagnetite)은 해양지각을 이루는 현무암에 존재하는 중요한 자성광물로서 일반적으로 저온산화에 의해 양이온이 결핍된(cation-deficient) 티탄맥히마이트(titanomaghemite)로 변한다. 실험실에서 철성분 제거방식(removal of iron mechanism)을 통해 자연에서 일어나는 티탄자철석의 수성 저온산화(low-temperature aqueous oxidation)를 재현하였으며, 산화정도에 따라 티탄맥히마이트의 자기적 특성이 민감하게 변화하는 것을 관찰하였다. 본 실험 결과 산화정도에 따라 티탄자철석의 큐리온도(Tc)는 166$^{\circ}C$에서 40$0^{\circ}C$로 증가하였고, 상온에서의 포화자화 강도(Ms)는 126.30 kA/m(25.26 emu/g)에서 16.55 kA/m(3.31 emu/g)로 감소하였으며, 항자기력(Hc)은 6.13 kA/m(77 Oe)에서 38.83 kA/m (488 Oe)로 잔류항자기력(Hcr)은 23.24 kA/m(292 Oe)에서 47.03 kA/m(591 Oe)로 증가함을 관찰하였다. 또한 대자율($\chi$)은 $2023{\times}10^{-6}SI$에서 $84{\times}10^{-6}SI$로 감소함을 나타내었다. 이와 같은 결과를 근거로 현재에서 30 Ma까지의 해양지각의 자화 강도의 변화는 티탄자철석의 저온산화에 의한 결과로 해석하였으며 30~120 Ma에 이르는 해양지각의 자화 강도의 변화는 해양지각에 포함된 티탄자철석의 산화와 산화에 순반되는 광물전에 의한 결과로 추정하였으며 보다 구체적인 원인은 해양지각에서 채취한 시료에 대한 체계적인 연구를 통해서 밝혀질 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.182-182
• /
• 2009

The effect of Re-oxidation on the PTCR properties of Sm-doped barium titanate ceramics was investigated by means of impedance spectroscopy. Electrical properties such as resistance vs. temperature, I-V curve were measured and microstructure was observed with SEM photography. Sample was fabricated with thick film process such as tape casting of green sheet, screen printing of electrode pattern, stacking, firing in reduced atmosphere and re-oxidation, etc. As the temperature of re-oxidation increases, resistance jump as a function of temperature enhances but resistance at room temperature increases. These behavior of resistance as a function of temperature, dependent on the re-oxidation condition, is analyzed with Cole-Cole impedance plot and is shown to be related with the degree of oxidation of grain boundary regardless of grain core during re-oxidation process of sample.

• Tribology and Lubricants
• /
• 제26권3호
• /
• pp.167-174
• /
• 2010

An apparatus for measuring oil oxidation was developed, which is capable of being mounted to mechanical devices for detecting power of fluorescent light reflected from oil in real time as an indication of the oil oxidation. This device has an advantage over conventional fluorescence spectrometers where the thin film is required for the measurement. Clean and used oil samples (mineral and synthetic oils) were tested by the developed apparatus that calculates a fluorescence quantum yield and a light absorption coefficient of the oil based upon the signals from the two light-receiving members and evaluates the degree of oil oxidation of test oils based on the fluorescence quantum yield. Results generally show that the developed device is able to effectively evaluate oil oxidation characteristics on-site in the field.

• 한국식품영양과학회지
• /
• 제32권7호
• /
• pp.1046-1052
• /
• 2003

Viscoelastic behavior of oxidized starch gel, modified with sodium hypochlorite (NaOCl) and the adding effects of protein in oxidized starch gel was studied by dynamic viscoelastic measurement. The storage modulus(G′) of starch gel increased with the increase of starch concentration. They showed higher value when starch suspension was treated to 95$^{\circ}C$ rather than 85$^{\circ}C$. Consistency of starch gel was decreased over 1.0% active Cl/g starch when heated to 95$^{\circ}C$, which means that the swelling of starch granules increased with concentration of NaOCl and showed more sensitive against shear. As the extent of oxidation increased, starch granules were easily destroyed. Therefore, it is hard to separate between compartment of leached-out amylose and that of amylopectin, which means that the ability of gel formation was reduced. When oxidized starches were gelatinized in presence of soy protein and sodium caseinate, it was found that G′ decreased, and frequency dependence of G′ and G" increased with the increased degree of oxidation in starch. The reduce of starch-protein interaction was thought to be through the dissociation of the branched amylopectin, which playa leading role in protein interaction, with the oxidation of starch.

• 식품과학과 산업
• /
• 제51권2호
• /
• pp.127-135
• /
• 2018

지방산화는 기본적으로 불포화지방과 산소의 결합이나 이 현상을 제대로 알고 실제 식품에 적용하기 위해서는 지방산화에 미치는 모든 인자들의 화학적 관점(one-electron reduction potential, bond dissociation enthalpy) 뿐만 아니라 물리적 현상(interface, antioxidant polar paradox)을 포괄적으로 이해해야 한다. Invitro실험법에 의해 도출된 산화방지제는 가능성을 보여주는 것이나 실제 식품과 bulk oil, 유화형태, 오르가노젤과 같은고체 상태의 다양한 매트릭스에서는 다른 활성을 나타낸다. 또한 산화방지제의 농도와 다른 물질의 존재에 따라 예상과 다른 활성을 나타내기도 한다. 산화방지제를 활용하여 최종제품의 유통기한을 증가시키기 위해서는 실제 활용될 제품의 매질로 사용해야 한다.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.19-24
• /
• 2010

Alloying degree is an important structural factor of PtRu catalysts for direct methanol fuel cells (DMFC). In this work, carbon supported PtRu catalysts were synthesized by reduction method using anhydrous ethanol as a solvent and $NaBH_4$ as a reducing agent. Using anhydrous ethanol as a solvent resulted in high alloying degree and good dispersion. The morphological structure and crystallanity of synthesized catalysts were characterized by X-ray diffraction (XRD), high resolution transmission electron microscope (HR-TEM). CO stripping and methanol oxidation reaction were measured. Due to high alloying degree catalyst prepared in anhydrous ethanol, exhibited low onset potential for methanol oxidation and negative peak shift of CO oxidation than commercial sample. Consequently, samples, applying ethanol as a solvent, exhibited not only enhanced CO oxidation, but also increased methanol oxidation reaction (MOR) activity compared with commercial PtRu/C (40 wt%, E-tek) and 40 wt% PtRu/C prepared in water solution.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.432-437
• /
• 2013

고분자 전해질 연료전지 구동 시 양극 활성 물질에 대한 CO 피독을 방지하기 위해 Cu를 촉매 활성 종으로 사용하고 반응물의 확산이 용이한 몇 가지 메조 세공 물질을 지지체로 이용하여 CO 선택적 산화 반응(PROX반응)을 실시하였다. 그 결과 거대 세공을 가진 SBA-15를 지지체로 사용했을 때 우수한 CO 산화 활성을 보였으며 특히 Cu 담지 량에 비례하여 활성은 증가하였다. 또한 Cu의 분산도를 높이고자 첨가한 Ti 성분은 저온에서 CO 산화 성능을 높이는데 기여하였다. 특히 Ti 성분을 20 wt-% 첨가한 Cu/Ti20-SBA-15 촉매에서 Cu의 분산도가 가장 우수하였으며 CO 산화활성 역시 개선됨을 확인하였다.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.413-419
• /
• 1997

The specimens which were prepared from cokes with additions of 0~25 wt% B4C were sintered in Ar atmosphere at 220$0^{\circ}C$. The effects of B4C content on graphitization and oxidation resistance of cokes were investigated. B4C accelerates the graphitization of cokes and at 220$0^{\circ}C$ the degree of graphitization increased from 0.33 which is the value of pure carbon to 0.56, which increased bluk density and porosity. Especially bending strength increased as th graphitization temperature increased. Oxidation resistance property was greatly improved when B4C was added more than 10wt% at 80$0^{\circ}C$ and when B4C was added more than 20wt% at 100$0^{\circ}C$. This was because that the thin layer of B2O3 glass phase on the surface of the composite could be identified to increase the oxidation resistance.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.151-156
• /
• 2010

In this paper, we characterized bimetallic Pt-Ru/C alloy catalysts having four different compositions and compared the catalytic activities of the prepared alloys for CO oxidation. ICP-AES, EDS, XRD, TEM, and XAS were used to investigate the composition, degree of alloying, particle size, and electronic structure of the prepared Pt-Ru/C catalysts. Those results indicated the synthesis of the alloy catalysts with intended composition and uniform size. The electrochemical study of the characterized alloys showed higher catalytic activity for CO oxidation than that of the commercial Pt/C (E-TEK, Inc., 20 wt %) catalyst. Especially, it was shown that the alloy catalyst with Ru composition of 50 atomic % gave the highest catalytic activity for CO oxidation.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.74-82
• /
• 1996

Fe-Si based powders prepare by melting the metals in the composition of FeSi2,.Fe0.95Mn0.05Si2 and Fe0.95Co0.05Si0.2 were used as the starting materials together with a commercial FeSi2 powder to study the effect of oxidation on their thermoelectric properties. The powders were heated at 650~80$0^{\circ}C$ in dired air before forming and sintering at 1190 and 120$0^{\circ}C$ in Ar+7%H2. The microstructure and phases of the annealed specimens were observed using the optical microscopty SEM, EDS and XRD. The thermoelectric properties of the specimens were also measured. The temperature at which Seebe다 coefficient showed the maximum value increased with the degree of oxidation. Electrical conductivity showed a tendency to decrease in the oxidized samples regardless of their compositions. Seebeck coefficient of the specimen showed almost the same value even after oxidation which may be explained by the formation of the discontinuous second phases from impurities in the oxidized specimens.