• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.342-347
• /
• 2004

The deformation behavior of a $Zr_{55}Al_{10}Ni_5Cu_{30}$ bulk metallic glass under tensile loading at different range of strain rates and temperatures between 680 K and 740 K were investigated. The variation in the deformation behavior of $Zr_{55}Al_{10}Ni_5Cu_{30}$ bulk metallic glass which resulted from the crystallization induced during testing was reported. The$Zr_{55}Al_{10}Ni_5Cu_{30}$ bulk metallic glass has showed either homogeneous or inhomogeneous deformation depending on test condition. It exhibited a maximum elongation of about 560 % at the condition of $407^{\circ}C{\times}\;10^{-4}/s$. The flow behavior exhibited three different types and the flow stress became lower at higher temperatures and lower strain rates. The increase of the time elapsed during heating resulted in the partial crystallization of bulk metallic glass phase and eventually strain hardening and brittle fracture.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.421-430
• /
• 2018

The shape of a yacht sail made of thin fabric materials is easily deformed by wind speed and direction and it is affected by the deformation of the standing rig such as mast, boom, shrouds, stays and spreaders. This deformed sail shape changes the air flow over the sail, it makes the deformation of the sail and the rig again. To get a sail performance accurately these interactive behavior of sail system should be studied in aspects of the aerodynamics and the fluid-structure interaction. In this study aerodynamic analysis for the sail system of a 30 feet sloop is carried out and the obtained dynamic pressure on the sail surface is applied as the loading condition of the calculation to get the deformations of the sail shape and the rig. Supporting forces by rig are applied as boundary condition of the structure deformation calculations. And the characteristics of the air flow and the dynamic pressure over the deformed sail shape is investigated repeatedly including the lift force and the location of CE.

• 대한금속재료학회지
• /
• 제56권12호
• /
• pp.861-869
• /
• 2018

To determine the origin of the inhomogeneous microstructure and texture observed in drawn and annealed high purity copper wires, two kinds of drawing process conditions and their influence was investigated. The regular condition, based on a symmetric die, and a condition designed intentionally to produce an inhomogeneous shear deformation using an asymmetric die were employed. The difference in intensity of <111>-<100> distributed texture between the two wires confirmed that the wire drawn under the asymmetric die condition experienced a higher amount of shear deformation. The extensive shear strain in the wire drawn under the asymmetric die condition gave rise to inhomogeneous primary and secondary recrystallization behavior. After annealing at $200^{\circ}C$, grains with <100> texture, which were larger than the surrounding recrystallized grains, were extensively present on one half circle of the wire drawn under the asymmetric die condition, while larger grains with <100> were sparsely observed around the middle region of the wire drawn under the regular condition. Interestingly, the area where the larger grains with <100> texture existed was identical to the area where the high shear strain occurred during drawing in both wires. During annealing at $400^{\circ}C$, grains with <112> texture started to grow abnormally at the center of both wires as a result of secondary recrystallization. After annealing at $900^{\circ}C$ grains with <112> due to secondary recrystallization occupied the entire region of the wire drawn under the regular condition. On the other hand, in the wire drawn under the asymmetric die condition and then annealed at $900^{\circ}C$, the <100> oriented grains as a result of the normal grain growth of the larger <100> grains which were observed after annealing at $200^{\circ}C$, coexisted with the abnormally grown <112> grains. These results indicate that dynamic recrystallization induced by the shear strain during drawing plays an important role in the inhomogeneity of the microstructure and texture of wires after annealing.

• 암석학회지
• /
• 제7권3호
• /
• pp.190-206
• /
• 1998

북부 소백산육괴의 중남부에 위치한 장군봉지역의 고생대 변성퇴적암류(조선누층군과 평안층군)에 대한 미구조와 변형작용과 변성광물들 성장(변성작용) 사이의 상대적인 시간관계를 연구하였다. 첫 번째 변성작용은 스태크상 클로리토이드 및 조립 흑운모와 안구상 홍주석 광물들의 결정화작용과 관련된 저압형 변성작용으로 인지된다. 이러한 변성작용은 동-서향의 등사 향사습곡(장군봉 습곡)과 그 축면엽리에 해당하는 S1 엽리면 형성과 관련된 D1 변형 이전의 비변형조건하에서 발생하는 고생대 변성퇴적암류에 광역적인 동-서향의 광물분대를 형성시켰다. 두 번째 변성작용은 직선 내지 곡선 형태의 내부엽리 Si를 갖는 십자석과 석류석 반상변정들의 성장과 관련된 중압형 변성작용이다. 이러한 변성작용은 장군봉 습곡 구성지층들의 부분적인 결손을 초래하는 동-서향 드러스트들의 발달과 관련된 D1 변형 이후의 비변형조건하에서 발생하였고, 동-서향의 예천전단대 형성과 관련된 D2 변형 동안에 계속 발생하여 고생대 변성퇴적암류에 역시 광역적인 동-서향의 광물분대를 형성시켰다. 세 번째 변성 작용은 팻치상 홍주석과 주상 내지 섬유상 규선석 그리고 조립 석류석 광물들의 성장과 관련된 쥬라기 춘양화강암에 의한 접촉변성작용이다. 이러한 접촉변성작용은 S3 파랑엽리면 형성과 관련된 D3 변형 이전의 비변형조건하에서 발생하였고, D3 변형의 전기단계 동안에 계속 발생하여 춘양화강암체의 근접부에 제한된 남-북향의 광물분대를 형성시켰다.

• 복식
• /
• 제50권3호
• /
• pp.13-30
• /
• 2000

The purpose of this study was to analyzed the types of Deformation dipicted on the late 1990s western costumes. The late 20th century cultural experience or lifestyle is interpreted with 'popular culture' ,popular culture is described as cultural phenomenon in postmodern condition. Contemporary popular culture may no longer be strictly 'working-class' as the idealistic purists of political formalism would like to , but does emerge from subordinate cultures, from the inventive edges of the consensus, and from the previously ignored and suppressed. It gestured through a widening democratization of styles, sounds and images, to an important remarking , to new possibilities , new perpectives, new projects. The growing importance of popular culture as a source for change of expression in the art, expecially new desire and will of artists has been caused lots of ' Deformation' in their works. Deformation, doesn't mean to represent object faithfully as it were seen through the artist's eyes. In a sense it implies that artists deform it with conscious or unconscious form. So in this study , the phenomenon of the postmodern western costumes is to describe ' formative language' called 'Deformation.' and it is classified three types, that is, 'Deformation of human-body image.' , Deformation of silhouette.' 'Deformation of detail.'. First , Deformation of human-body image is represented by deconstructive , subversive image in western costumes, a lot of costumes types of deconstruction have been shown by fashion designers are emphasized empathy with Deformation of human-body image. Second, Deformation of silhouette is also represented subversion of traditional manner and ultiity, underwear and outwear structure and ugly image. parody image of postumodernism , and so on. Above all, the late 1990s western costumes with Deformation of silhouette was an infinitely larger and more complex world than it appeared from outside and has expressed as a rejection against the values which traditional aesthetic concept had pursued, And parody through the change of internal meaning is to bring about parodox, irony, contempt, satire , unexpectedness by applying the original to inapproporate subject through its substition, inversion. Third, Deformation of detail is represented overdecoration, exaggerative distortion of for , overlapping and fetish image, parody image, kitsch image, and so on , Once fetish achieve a certain' style factor' among trendsettler, they are picked up by internationally famous fashion designers, The characteristics of kitsch are overdecoration , unfitness , imitation , used western costumes.

• 열처리공학회지
• /
• 제33권4호
• /
• pp.180-184
• /
• 2020

The crystallographic texture plays an important role in both the plastic deformation and the macroscopic anisotropy of magnesium alloys. In previous study for AZ80 magnesium alloy, it was found that the main texture components of the textures vary with the deformation conditions at high temperatures. Also, the basal texture was formed at stress of more than 15-20 MPa and the non-basal texture was formed at stress of less than 15-20 MPa. Therefore, in this study, uniaxial compression deformation of AZ80 magnesium alloy was carried out at high temperature (stress of 15-20 MPa). The uniaxial compression deformation is performed at temperature of 723 K and strain rate 3.0 × 10^-3s^-1, with a strain range of between -0.4 and -1.3. Texture measurement was carried out on the compression planes by the Schulz reflection method using nickel filtered Cu Kα radiation. EBSD measurement was also conducted in order to observe spatial distribution of orientation. As a result of high temperature deformation, the main component of texture and its development vary depending on deformation condition of this study.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.277-285
• /
• 1998

This paper presents the deformation characteristics of the moving pressure plate in a balanced type vane pump that widely used automotive power steering systems. Moving pressure plate can control the clearance between rotor and plate in accordance with load pressure variation; it always guarantees that pump to have optimal volumetric efficiency. In this paper, firstly, we calculate the acting force on the pressure plate, which is used to determine the angular position and load condition for analyzing the deformation of pressure plate. Secondary, finite element method is used for the deformation analysis. As results of acting force analysis, it is found that maximum difference of forces occurs at angular position 28$\circ$ from the small arc center of cam ring and load pressure is a dominant factor to affect acting force variation. The deformation of pressure plate increases as load pressure increases. At high load pressure, the deformation of pressure plate becomes larger than the initial clearance between rotor and plate. Therefore, it is required to design the plate for controlling the deformation.

• Journal of Welding and Joining
• /
• 제19권4호
• /
• pp.384-390
• /
• 2001

There have been many problems due to deformation in industry field. Especially, it is severe in parts with small size and thin thickness and in products that must have excellent airtightness and anti-noise. The countermeasures for this deformation in field have mainly been dependent on the rule of trial and error by operator's experience because of productivities. Systematic study about this product with deformation is also insufficient that deformation is complex problem with shape, size, material of product, joining method and conditions, etc.. It is efficient to apply CAE technique without influence on productivity to this problem. There is, however much difference between the result analyzed by CAE and appearances in working field because of the insufficiency of communication between simulator and worker and of sensing data for boundary condition in analysis. In this study, to solve this deformation problem, we intend to make a simulation model that is adapted from working conditions by tuning and feedback between sensing data and simulation results. This paper include temperature monitoring and make a heat transfer model using sensing data in product as previous step for deformation analysis. The heat transfer analysis of shrinkage fit process is considerably difficult due to contact heat transfer between case and core. To solve this contact problem, gap element is used in present study.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.521-524
• /
• 2008

Effect of prior deformation on the sliding wear of the ultra-fine grained (UFG) ferrite-martensite dual phase (DP) steel was investigated. The UFG DP steel was fabricated by the ECAP and subsequent intercritical annealing. The steel was cold rolled before the wear test, and the effect of the prior deformation on the wear was examined. The wear tests were carried out at various loads against a bearing steel ball. The wear rate of the UFG DP steel that did not experience the prior deformation was higher than that of the coarse-grained (CG) DP steel, because of more severe surface shear deformation. The wear rate of the specimens with prior deformation was much higher than that of the specimen without prior deformation. The deformed CG DP specimen showed higher rate than the deformed UFG DP specimen, and the rate-variation of the CG DP steel was much bigger under the same test condition.

• 대한금속재료학회지
• /
• 제46권7호
• /
• pp.449-457
• /
• 2008

Compression deformation behaviors at high temperature as a function of temperature and strain rate were investigated in the 6061 aluminum alloy, which is used for automobile wheel. Compression tests were carried out in the range of temperatures $300{\sim}475^{\circ}C$ and strain rate $10^{-3}{\sim}10^{-1}sec^{-1}$. By analyzing these results, strain rate sensitivity, deformation temperature sensitivity, the efficiency of power dissipation, Ziegler's instability criterion, etc were calculated, which were plastic deformation instability parameters as suggested by Ziegler, Malas, etc. Furthermore, deformation processing map was drawn by introducing dynamic materials model (DMM) and Ziegler's Continuum Criteria. This processing map was evaluated by relating the deformation instability conditions and the real microstructures. As a result, the optimum forging condition for the automobile wheel with the 6061 aluminum alloy was designed at temperature $450^{\circ}C$, strain rate $1.0{\times}10^{-1}sec^{-1}$. It was also confirmed by DEFORM finite element analysis tool with simulation process.