• 한국방재학회 논문집
• /
• 제3권1호
• /
• pp.123-131
• /
• 2003

파형강관을 삽입하여 보강된 중공원형단면의 역학적 거동을 연구하기 위하여 직경 50cm, 길이 340cm의 시험체를 제작하였고, 3점 휨시험을 수행하였다. 하중재하는 파괴 또는 최대한변형이 발생할 때까지 느리게 증가시켰다. 시험하는 동안에 시험체 중앙의 휨방향 변위와 인장측과 압축측의 종방향 변위를 측정하였다. 측정데이타를 분석한 결과를 파형강관이 삽입되지 않은 등가단면에 대한 해석결과와 비교하였다. 비교결과, 중공 철근콘크리트 부재의 휨강성과 연성이 파형강관을 내부에 삽입함으로써 크게 향상시킬 수 있는 것으로 나타났다.

• Computers and Concrete
• /
• 제8권1호
• /
• pp.71-96
• /
• 2011

Existing reinforced concrete (RC) beams can be strengthened with externally bolted steel plates to the sides of beams. The effectiveness of this type of bolted side-plate (BSP) beam can however be affected by partial interaction between the steel plates and RC beams due to the mechanical slip of bolts. To avoid over-estimation of the flexural strength and ensure accurate prediction of the load-deformation response of the beams, the effect of partial interaction has to be properly considered. In this paper, a special non-linear macro-finite-element model that takes into account the effects of partial interaction is proposed. The RC beam and the steel plates are modelled as two different elements, interacting through discrete groups of bolts. A layered method is adopted for the formulation of the RC beam and steel plate elements, while a special non-linear model based on a kinematic hardening assumption for the bolts is used to simulate the bolt group effect. The computer program SiBAN was developed based on the proposed approach. Comparison with the available experimental results shows that SiBAN can accurately predict the partial interaction behaviour of the BSP beams. Further numerical simulations show that the interaction between the RC beam and the steel plates is greatly reduced by the formation of plastic hinges and should be considered in analyses of the strengthened beams.

• Smart Structures and Systems
• /
• 제13권1호
• /
• pp.55-80
• /
• 2014

The present work pays emphasis on investigating the effect of different types of debonding on the bending behaviour of active sandwich beam, consisting of both extension and shear actuators. An active sandwich beam finite element is formulated by using Timoshenko's beam theory, characterized by first order shear deformation for the core and Euler-Bernoulli's beam theory for the top and bottom faces. The problem of debondings of extension actuator and face are dealt with by employing four-region model for inner debonding and three-region model for the edge debonding respectively. Displacement based continuity conditions are enforced at the interfaces of different regions using penalty method. Firstly, piezoelectric actuation of healthy sandwich beam is assessed through deflection analysis. Then the effect of actuators' debondings with different boundary conditions on bending behavior is computationally evaluated and experimentally clamped-free case is validated. The results generated will be useful to address the damage tolerant design procedures for smart sandwich beam structures with structural control and health monitoring applications.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.173-176
• /
• 2008

본 연구는 다방향 채널형 FRP판으로 보강된 철근콘크리트 보의 전단거동 특성을 규명함에 그 목적이 있다. 본 연구의 목적을 달성하기 위해 실험변수로는 전단 스팬비(a/d), 보강재 종류, 보강 방향, 보강 방법 등을 고려하여 실험을 수행하였다. 보강방법은 전단성능이 취약한 철근콘크리트 보 측면에 홈을 형성하고 에폭시를 충전한 이후 다방향 채널형 FRP판을 삽입하여 부착시켰다. 실험결과 다방향 채널형 FRP판으로 보강된 철근콘크리트 보의 대부분은 보강되지 않은 보에 비해 최대 전단강도가 최대 42%까지 증진 되었다. 또한 다방향 채널형 FRP판은 전단균열의 발생 및 진전을 억제하며, 휨파괴를 유도하는 연성구간의 증진 효과가 매우 좋은 것으로 나타났다.

• 한국가스학회지
• /
• 제10권1호
• /
• pp.56-60
• /
• 2006

지하식 LNG 저장탱크의 Bottom Slab와 Side Wall의 연결부(코벨)는 응력집중을 완화하기 위하여 앵커바를 사용하여 부분적으로 고정되는 힌지 조건을 갖는다. 그러므로 LNG저장탱크 하중 조건인 LNG온도, 지하수압 등에 의해 방사 방향과 수직 방향으로 변형된다. 멤브레인 설계 관점에도 이러한 변형값이 직접 전달되어 중첩되므로 중요한 부분이다. 본 논문에서는 코벨부의 실제 거동을 조사하기 위하여 센서를 설치하여 온도, 하중 그리고 변위를 측정하였다. 또한 FEM 해석으로 예측한 하중조건에 대한 설계 값과 비교하여 합리적인 설계를 제시하고자 하였다.

• Structural Engineering and Mechanics
• /
• 제33권5호
• /
• pp.605-619
• /
• 2009

This paper presents the details of finite element (FE) modeling and analysis of an external prestressing technique to strengthen a prestressed concrete (PSC) end block. Various methods of external prestressing techniques have been discussed. In the proposed technique, transfer of external force is in shear mode on the end block creating a complex stress distribution. The proposed technique is useful when the ends of the PSC girders are not accessible. Finite element modeling issues have been outlined. Brief description about material nonlinearity including key aspects in modeling inelastic behaviour has been provided. Finite element (FE) modeling including material, loading has been explained in depth. FE analysis for linear and nonlinear static analysis has been conducted for varying external loadings. Various responses such as out-of-plane deformation and slip have been computed and compared with the corresponding experimental observations. From the study, it has been observed that the computed slope and slip of the steel bracket under external loading is in good agreement with the corresponding experimental observations.

• Steel and Composite Structures
• /
• 제17권3호
• /
• pp.253-269
• /
• 2014

Among the various alternatives to make a steel tubular member connection, making a slotted and gusset plate welded connection is one of the most frequently preferred alternatives. This type of connection is essentially an end connection that is made by slotting the tube longitudinally, inserting the gusset plate and then placing longitudinal fillet welds at the tube-to-plate interface. In this paper an experimental study on the behaviour of such connections in stainless steel is presented. 24 specimens were tested under concentrically applied axial tensile forces for varying tube-to-gusset plate weld lengths. Both circular and box section members were considered in the test program. Load-deformation curves were obtained and comparisons were made in terms of strength and ductility. The results obtained from the study were then critically examined and compared with currently available design guidance for slotted gusset plate welded tubular end connections. It is noted that no specific rules exist in international specifications on structural stainless steel which cover the design of such connections. Therefore, the results of this study are compared with the existing design rules for carbon steel.

• Structural Engineering and Mechanics
• /
• 제29권6호
• /
• pp.689-707
• /
• 2008

This study presents a method to evaluate the seismic risk of an extradosed bridge with seismic isolators of lead rubber bearings (LRBs), and also to show the effectiveness of the LRB isolators on the extradosed bridge, which is one of the relatively flexible and lightly damped structures in terms of seismic risk. Initially, the seismic vulnerability of a structure is evaluated, and then the seismic hazard of a specific site is rated using an earthquake data set and seismic hazard maps in Korea. Then, the seismic risk of the structure is assessed. The nonlinear seismic analyses are carried out to consider plastic deformation of bridge columns and the nonlinear characteristics of soil foundation. To describe the nonlinear behaviour of a column, the ductility demand is adopted, and the moment-curvature relation of a column is assumed to be bilinear hysteretic. The fragility curves are represented as a log-normal distribution function for column damage, movement of superstructure, and cable yielding. And the seismic hazard at a specific site is estimated using the available seismic hazard maps. The results show that in seismically-isolated extradosed bridges under earthquakes, the effectiveness of the isolators is much more noticeable in the columns than the cables and girders.

• Structural Engineering and Mechanics
• /
• 제61권5호
• /
• pp.593-603
• /
• 2017

A high-efficiency simplified modelling approach is proposed for investigating the nonlinear responses of reinforced concrete linings of shield tunnels. Material and geometric nonlinearities are considered in the analysis of the lining structures undergoing large deformation before ultimately losing the load-carrying capacity. A beam-spring element model is developed to capture the force-transfer mechanism between lining segments and radial joints. The developed model is validated by comparing analyzed results to experimental results of a single-ring lining structure under two loading conditions: the ground overloading and the lateral unloading respectively. The results show that the lining structure under the lateral unloading due to excavation on the both sides of the tunnel is more vulnerable compared to the case of ground overloading on the top of the tunnel. A parameter study is conducted and results indicate that the lateral pressure coefficient has the greatest influence on the behaviour of the lining structure.

• 열처리공학회지
• /
• 제9권2호
• /
• pp.147-158
• /
• 1996

Generally, analytical consideration on the behaviour of metallic structures during quenching process, and analysis on the thermal stress and deformation after heat treatment are very important in presumption of crack and distorsion of quenched material. In this study a set of constitute equations relevant to the analysis of thermo elasto-viscoplastic materials with strain hysteresis during quenching process way presented on the basis of contimuum thermo-dynamics mechanics. The thermal stresses were numerically calculated by finite element technique of weighted residual method and the principle of virtual work. In the calculation process, the temperature depandency of physical and mechaniclal properties of the material in consideration. On the distribution of elasto-viscoplastic thermal stresses according to radial direction, axial and tangential stress are tensile stress(50MPa, 1.5GPa and 300MPa) in surface and compressive stress(-1.2GPa, -1.14GPa and -750MPa) in the inner part on the other hand, radial stress is tensile stress(900MPa) in area of analysis. According to axial direction, tangential stress gradients are average 60MPa/mm on the whole. The reversion of stress takes place at 11.5 to 16.8mm from the center in area of analysing.