• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.587-595
• /
• 2019

Deformation measurement of large scale structures, such as the ground beds of high-rise buildings, tunnels, bridge, and railways, are important for insuring service quality and safety. The pose-relay videometrics method and displacement-relay videometrics method have already presented to measure the pose of non-intervisible objects and vertical subsidence of unstable areas, respectively. Both methods combine the cameras and cooperative markers to form the camera series networks. Based on these two networks, we propose two novel videometrics methods with closed-loop camera series network for deformation measurement of large scale structures. The closed-loop camera series network offers "closed-loop constraints" for the camera series network: the deformation of the reference points observed by different measurement stations is identical. The closed-loop constraints improve the measurement accuracy using camera series network. Furthermore, multiple closed-loops and the flexible combination of camera series network are introduced to facilitate more complex deformation measurement tasks. Simulated results show that the closed-loop constraints can enhance the measurement accuracy of camera series network effectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.222-227
• /
• 2008

This study is focused on an integrated numerical modeling enabling one to investigate the dynamic behavior and failure of 2-D textile composite and 3-D orthogonal woven composite structures weakened by micro-cracks and subjected to an impact load. The integrated numerical modeling is based on: I) determination of governing equations via a three-level hierarchy: micro-mechanical unit cell analysis, layer-wise analysis accounting for transverse strains and stresses, and structural analysis based on anisotropic plate layers, II) development of an efficient computational approach enabling one to perform transient response analyses of 2-D plain woven and 3-D orthogonal woven composite structures featuring the matrix cracking and exposed to time-dependent loads, III) determination of the structural characteristics of the textile-layered composites and their degraded features under various geometrical yarn shapes, and finally, IV) assessment of the implications of stiffness degradation on dynamic response to impact loads.

• 한국국방경영분석학회지
• /
• 제30권1호
• /
• pp.135-152
• /
• 2004

Ever since Benoit's(1973, 1978) study, the relationship between defense spending and economic growth has been the subject of extensive empirical works. While a number of studies have reported that higher defense expenditure stimulate economic growth, many other studies have reported that an increase in military burden may hinder economic growth. To the extent that countries differ substantially in socioeconomic structures, the effects of defense spending cannot be generalized across countries. In this paper, Granger causality tests are performed between Korean defense expenditure and economic growth, consumption, investment, inflation and unemployment rate during the period from 1970 to 2002. The results show that Korean defense expenditure did not affect economic growth and unemployment rate. However, Korean defense expenditure caused consumption and inflation to decrease and investment to increase. On the other hand Korean defense expenditure was not Granger-caused by economic growth, consumption, investment, inflation and unemployment rate. In conclusion, the opportunity cost of Korean defense expenditure seemed to be relatively moderate considering Korean security environment. Even if it was not statistically significant, Korean defense burden at least did not bother economic growth.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.455-458
• /
• 2003

The variety of document ranking algorithms have developed to provide efficient mining results for user's query on the web environment. The typical ranking algorithms are the Vector-Space Model based on the text, PsgeRank and HITS algorithms based on the hyperlink structures and other several improvement algorithms. All these are for the user's convenience and preference. However, these algorithms are usually developed on then Horizontal and non-hierarchial web environments and are not suitable for the hierarchial web environments such as enterprise and defense networks. Thus, we must consider the special environment factors in order to improve the ranking algorithms. In this paper, we analyze the several typical algorithms used by hyperlink structures on the web environment. We, then suggest a configuration of the hierarchical web environment and also give the relations between agents of the web mining system. Next, we propose an improved ranking algorithm suitable to this kind of special environments. The proposed algorithm is considered both the hyperlink structures of the documents and the location of the user of the hierarchical web.

• 한국군사과학기술학회지
• /
• 제21권3호
• /
• pp.288-294
• /
• 2018

Recently, as the speed and performance of the launcher and the missile have been improved, it is necessary to consider the acoustic load of launching and flight in initial design step. In this paper, an experimental study on acoustic absorption and transmission characteristics of aluminium vs. sandwich composite structures were conducted. The overall noise reduction was evaluated by performing an acoustic test in the reverberation room, and the acoustic absorption and transmission loss of the structures were analyzed by conducting the sound absorption test inside the structure.

• 한국항공우주학회지
• /
• 제47권1호
• /
• pp.35-40
• /
• 2019

본 연구의 목적은 항공기 구조개발에 널리 적용되고 있는 탄소섬유 복합재의 피로특성을 확인하고, 실기체 피로시험에 활용되고 있는 자료를 획득하는 것이다. 복합재 구조의 내구성 및 손상허용성의 평가는 주로 피로시험을 통하여 이루어지며, 실기체 피로시험에 적용되고 있는 파라미터에는 피로수명계수와 하중증대계수가 있다. 탄소섬유/에폭시 일방향 및 직물형 복합재로 시편을 제작하였으며, 응력비와 적층패턴을 달리하여 피로시험을 수행하였다. Sendeckyj 모델을 적용한 와이블 분포와 개별적인 피로수명에 대한 와이블 분포를 이용하여 형상 파라미터를 분석하였다. 또한 신뢰도를 고려한 피로수명계수와 하중증대계수를 평가하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.29-32
• /
• 2016

Using the various exchange-correlation functionals, such as LDA, GGA-PBE, GGA-PBEsol and GGA-AM05 functionals, first principle studies were conducted to determine the structures of paraelectric and ferroelectric PbTiO₃. Based on the structures determined by the various functionals, the piezoelectric properties of PbTiO₃ are predicted under the density-functional perturbation theory (DFPT). The present prediction with the various GGA functionals are closer to the experimental findings compared to the LDA values. The present DFT calculations using the GGA-PBEsol functional estimate the experimental data more reasonably than the conventional LDA and GGA fucntionals. The GGA-AM05 functional also predicts the experimental data as well as the GGA-PBEsol. The piezoelectric tensor calculated with PBEsol is relatively insensitive to pressure.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.665-675
• /
• 2022

The safety problems of giant hydraulic structures such as dams caused by terrorist attacks, earthquakes, and wars often have an important impact on a country's economy and people's livelihood. For the national defense department, timely and effective assessment of damage to or impending damage to dams and other structures is an important issue related to the safety of people's lives and property. In the field of damage assessment and vulnerability analysis, it is usually necessary to give the damage assessment results within a few minutes to determine the physical damage (crack length, crater size, etc.) and functional damage (decreased power generation capacity, dam stability descent, etc.), so that other defense and security departments can take corresponding measures to control potential other hazards. Although traditional numerical calculation methods can accurately calculate the crack length and crater size under certain combat conditions, it usually takes a long time and is not suitable for rapid damage assessment. In order to solve similar problems, this article combines simulation calculation methods with machine learning technology interdisciplinary. First, the common concrete gravity dam shape was selected as the simulation calculation object, and XFEM (Extended Finite Element Method) was used to simulate and calculate 19 cracks with different initial positions. Then, an LSTM (Long-Short Term Memory) machine learning model was established. 15 crack paths were selected as the training set and others were set for test. At last, the LSTM model was trained by the training set, and the prediction results on the crack path were compared with the test set. The results show that this method can be used to predict the crack propagation path rapidly and accurately. In general, this article explores the application of machine learning related technologies in the field of mechanics. It has broad application prospects in the fields of damage assessment and vulnerability analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권12호
• /
• pp.4343-4355
• /
• 2014

Multicast group communication has many advantages in data centers and thus is widely used by many applications. It can efficiently reduce the network traffic and improve the application throughput. For the multicast application in data centers, an essential problem is how to find a minimal multicast tree, which has been proved to be NP-hard. In this paper, we propose an approximation tree-building method for the minimal multicast problem, named HD（Hamming Distance）-based multicast tree. Consider that many new network structures have been proposed for data centers. We choose three representative ones, including BCube, FBFLY, and HyperX, whose topological structures can be regarded as the generalized hypercube. Given a multicast group in BCube, the HD-based method can jointly schedule the path from each of receiver to the only sender among multiple disjoint paths; hence, it can quickly construct an efficient multicast tree with the low cost. The experimental results demonstrate that our method consumes less time to construct an efficient multicast tree, while considerably reduces the cost of the multicast tree compared to the representative methods. Our approach for BCube can also be adapted to other generalized hypercube network structures for data centers after minimal modifications.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.948-949
• /
• 2006

An infiltration technique using W-Cu composite powder has been developed to enhance microstructural uniformity of W-Cu pseudo-alloy. W-Cu composite powder, manufactured by reduction from $WO_3$ and CuO powder mixtures, were blended with W powder and then cold iso-statically pressed into a cylindrical bar under 150 MPa. The pressed samples were pre-sintered at $1300^{\circ}C$ for 1 hour under hydrogen to make a skeleton structure. This skeleton structure was more homogeneous than that formed by using W and Cu powder mixtures. The skeleton structures were infiltrated with Cu under hydrogen atmosphere. The infiltrated W-Cu pseudo-alloy showed homogeneous microstructure without Cu rich region