• 한국산학기술학회논문지
• /
• 제18권2호
• /
• pp.335-341
• /
• 2017

본 논문은 모터 샤프트 제조 공정에서 발생하는 이중컷 불량을 검사하기 위한 영상 처리 알고리즘을 제안하였다. 알고리즘은 영상의 밝기를 이용하여 외곽선을 추출하는 단계와 추출된 외곽선을 이용하여 이진화된 경계선 그래프를 구하는 단계, 최종적으로 이진화된 경계선 그래프를 이용하여 불량품을 판정하는 단계로 구성된다. 본 논문에서는 두 절단면이 분리되어 있는 결함과 두 절단면이 연결되어 있는 결함을 각각 type 1 결함과 type 2 결함이라고 정의하였다. 실제 제조 과정에서 112개의 양품과 44개의 불량품 (type 1 불량 34개 및 type 2 불량 10개) 샘플을 수집하였으며, 수집한 샘플을 이용하여 제안된 알고리즘을 검증하였다. 알고리즘 시험 결과 100% 정확도로 양품과 불량품을 판정하였으며, 불량품의 경우도 type 1 불량과 type 2 불량을 정확히 구분하는 것으로 확인되었다. 본 논문에서 제안한 알고리즘은 추가적으로 다양한 샘플에 대해 신뢰성을 확보한 후 실제 현장에 사용할 계획이다.

• 한국환경복원기술학회지
• /
• 제23권3호
• /
• pp.91-104
• /
• 2020

This study was conducted to analyze the characteristics of defects according to the type of block and spatial type by quantitatively examining defects occurring in block pavement in apartment complex. According to the research results, depending on the type of block, defects have occurred 1,394.3ea/100㎡ in interlocking paver blocks, 464.8ea/100㎡ in clay brick paver blocks, and 235.1ea/100㎡ in shot blasted paver blocks. By space type, the defects were occurred 1,576.0ea/100㎡ on the access road paved by interlocking paver blocks and the defects were found 1,139.6ea/100㎡ in interlocking paver blocks, 235.1ea/100㎡ in shot blasted paver blocks, and 797.1ea/100㎡ in clay brick paver blocks, on the sidewalk. Also the defects are occurred 455.6ea/100㎡ on the resting space and 403.2ea/100㎡ on the gym space paved by clay brick paver blocks. Through the size analysis of the defects in the block paver, in the case 'peeling', the largest volume of 2,539.0㎣ on the sidewalk paved with shot blasted paver blocks, and 'Subsidence' occurred at the widest area of 2,096.0㎠ on the sidewalk where interlocking paver block was constructed. The difference in defect occurrence according to the type of block is considered to be influenced by the block production process, and the space type is considered to be caused the difference in the occurrence of defects according to the cause of construction and the usage pattern of residents. This study conducted a survey on defects in block and analyzed the defect characteristic according to paver material and space type. Base on this, it is judged that it can be used as an efficient basic data for material replacement, improvement, paver planning and construction in the future.

• Nuclear Engineering and Technology
• /
• 제45권3호
• /
• pp.361-366
• /
• 2013

An imaging technique to visualize the internal defects in a plate-type nuclear fuel specimen was developed by using an active optical interferometer for a nondestructive quality inspection. A periodic thermal wave having a sinusoidal intensity pattern induced a periodical strain variation for the specimen. The varying strain image was acquired using an optical laser interferometer. The strain distribution over the internal defects will be distorted in an acquired strain image because a part of the thermal wave will be reflected from these defects during propagation. In this paper, internal defects were efficiently visualized by sequentially accumulating the extracted defect components. The experimental results confirmed that the developed visualization system can be a valuable tool to detect the internal defects in plate-type nuclear fuel.

• Archives of Plastic Surgery
• /
• 제48권3호
• /
• pp.261-268
• /
• 2021

Background Various methods have been described to close large meningomyelocele defects, but no technique has been proven superior to others. This study presents cases of meningomyelocele defect closure with a keystone-design perforator island flap. Methods A retrospective study was performed on 14 patients with meningomyelocele defects closed using various types of keystone flaps. Results The median age of the patients at surgery was 10.5 days (range, 1-369 days) and the average defect size was 22.5 cm² (range, 7.1-55.0 cm²). The average operative time for defect closure was 89.6 minutes (range, 45-120 minutes). Type IV bilateral keystone flaps were used for four defects, type IV unilateral flaps for six defects, type IIA flaps for two defects, and type III flaps for two defects. Conclusions All the defects healed completely with no major complications. The keystone-design perforator island flap is a reliable, easy, and fast technique to close large meningomyelocele defects.

• 한국건축시공학회지
• /
• 제20권6호
• /
• pp.515-525
• /
• 2020

최근 공동주택에서 발생하는 하자로 인한 소송 및 분쟁이 증가하고 있어 사회적 이슈로 대두되고 있다. 이를 해결하기 위해 많은 공동주택 하자 유형에 관한 연구들이 진행되었지만, 문제가 원만하게 해결되지 않고 있다. 최근 시공된 공동주택을 대상으로 공종별 하자 유형을 조사해 추후 하자 대책 및 예방방안을 제시하는 연구의 기반을 마련할 필요성이 강조되었다. 이에 본 연구는 프로젝트관리시스템와 하자보고서를 통해 공동주택에서 발생한 실제 하자 사례를 바탕으로 하자를 분석하였으며, 주요 목적은 공동주택의 세부공종별 하자 유형을 파악함으로써 주요 하자 유형에 대한 원인을 제시하고, 추후 하자 유형별 대책 및 예방방안 연구의 기반을 마련함에 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.74-75
• /
• 2019

There are certain types of construction that produces many defects during the construction of apartment buildings. It may be due to construction errors in the type itself, but more often, it is due to defects derived from other types of construction. Thus, to reduce such secondary defects and prevent fundamental defects in particular types of construction, academic research on the types of construction causing secondary defects should be actively conducted. In addition, as claimed in this study, the industries should work harder to improve the quality of the type of construction that causes secondary defects, rather than just trying to improve the ostensible problems. If the efforts of each sector are backed up, the disputes over defect repair in apartment building construction will reduce in general, which in turn will lead to a reduction in national loss within the construction industry.

• Journal of Korean Neurosurgical Society
• /
• 제46권6호
• /
• pp.522-527
• /
• 2009

Objective : Atlantal arch defects are rare. Few cadaveric and imaging studies have been reported on the variations of such anomalies. Our goal in this study was to examine the incidence and review the clinical implications of this anomaly. Methods : A retrospective review of 1,153 neck or cervical spine computed tomography (CT) scans was performed to identify patients with atlantal arch defects. Neck CT scans were performed in 650 patients and cervical spine CT scans were performed in 503 patients. Posterior arch defects of the atlas were grouped in accordance with the classification of Currarino et al. In patients exhibiting this anomaly, special attention was given to defining associated anomalies and neurological findings. Results : Atlantal arch defects were found in 11 (11/1153, 0.95%) of the 1,153 patients. The type A posterior arch defect was found in nine patients and the type B posterior arch defect was found in two patients. No type C, D, or E defects were observed. One patient with a type A posterior arch defect had an anterior atlantal-arch midline cleft (1/1153, 0.087%). Associated cervical spine anomalies observed included one $C_{6-7}$ fusion and two atlantal assimilations. None of the reviewed patients had neurological deficits because of atlantal arch anomalies. Conclusion : Most congenital anomalies of the atlantal arch are found incidentally during investigation of neck mass, neck pain, radiculopathy, and after trauma.

• 대한기계학회논문집A
• /
• 제31권6호
• /
• pp.651-658
• /
• 2007

A new tree-structured neural network classifier is proposed for the automatic real-time inspection of cold-rolled steel strip surface defects. The defects are classified into 3 groups such as area type, disk type, area & line type in the first stage of the tree-structured neural network. The defects are classified in more detail into 11 major defect types which are considered as serious defects in the second stage of neural network. The tree-structured neural network classifier consists of 4 different neural networks and optimum features are selected for each neural network classifier by using SFFS algorithm and correlation test. The developed classifier demonstrates very plausible result which is compatible with commercial products having high world-wide market shares.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.135-138
• /
• 2004

Since the upsetting type is superior to an extrusion type to get the dimensional accuracy of cold forged spur gear, the upsetting type process far spur gear cold forging has been studied. FE analysis of upsetting type process fur spur gear cold forging was performed to investigate about flow pattern of workpiece and die stress. To analyze the elastic characteristics of die, both rigid and elastic material model were used during loading stage. Under-filled defects were detected In lower portions of spur gear forged by upsetting type in experimental. When the elastic material model for die was used, the under-filled defects could be predicted. On the other hand, if the material model of die was rigid, the defects could not been presented because the die deflection was not considered.

• Journal of the Korean Physical Society
• /
• 제73권12호
• /
• pp.1895-1898
• /
• 2018

The mechanical properties of Al, Ti, Fe, and Cu metals p-type Si, and n-type Si were investigated by using coincidence Doppler broadening (CDB) positron annihilation spectroscopy. The samples in this experiment were irradiated by using X-rays at generating powers for up to 9 kW. The data taken after the irradiation showed all the characteristic features predicted from defects with vacancies. The S parameter values of the metals were generally less than those of semiconductors such as p-type Si and n-type Si. The relationship between n-type Si and p-type Si were more affected when n-type Si rather than p-type Si was irradiated with X-rays.