• Computers and Concrete
• /
• 제33권5호
• /
• pp.621-630
• /
• 2024

This study presents novel electromagnetic wave-based methods for evaluating the integrity of cement-based structures using time domain reflectometry (TDR). Two cement-based plates with embedded rebars are prepared under sound and defective conditions. TDR tests are carried out using transmission lines with various numbers of artificial joints, and electromagnetic waves are measured to assess the integrity of the plates. The experimental results show that the travel time of electromagnetic waves is consistently longer in sound plates than in defective ones, and an increase in the reflection coefficients is observed in the defect zone of the defective plates. Electromagnetic wave velocities are higher in the defective plates, especially when connectors are present in the transmission line. A novel approach based on the area of the reflection coefficient provides larger areas in the defective plates, and the attenuation effect of the electromagnetic waves induces a difference in the areas of the reflection coefficient between the two defect conditions. An alternative method using the centroid of the defect zone slightly overestimates the location of the defect zone. The length of the defect zone is estimated using the defect ratio and wave velocities of cement, air, and plate. The length of the defect zone can also be calculated using the travel times within the plate, total measured length of the plate, and wave velocities in the cement and air. Therefore, the electromagnetic wave-based methods proposed in this study may be useful for estimating the location and length of defect zones by considering attenuation effects.

• Journal of Chest Surgery
• /
• 제23권3호
• /
• pp.430-437
• /
• 1990

We clinically evaluated 121 cases of ventricular septal defect which we operated from April, 1986 to December, 1989 at Inha General Hospital, Seong-Nam, Department of Thoracic and Cardiovascular Surgery, College of Medicine, Inha University. These patients were occupied 54.8% of all congenital heart diseases operated on its same period. Of the 121 patients, 63 patients were male[52.1%] and 58 patients were female[47.9i]. The two most common symptoms were frequent upper respiratory infection and dyspnea on exertion. By Kirklin s anatomical classification, type I constituted 34.7%, type II 61.98%, type III 0.03% and type IV not occupied. Associated cardiac anomalies were found in 34 cases, and PDA was most common associated anomaly, occupied in 22 cases. On the cardiac catheterization data, there were statistically significant correlation between VSD size[cm2 /BSAm2] and systolic pulmonary arterial pressure[sPAP], pulmonary to systemic flow ratio[Qp/Qs] & pulmonary to systemic pressure ratio[Pp/Ps] respectively, Type II [r=0.53, p<0.01] was more correlated than type I [r=0.49, p<0.05] between VSD size and Qp /Qs. We could not found the correlationship between age and Qp/Qs [Type I; r=0.16, Type II; r=-0.15] All cases were operated under cardiopulmonary bypass and 58 cases[46.3%] were operated through the right atrial approach, and 34 cases[28.1%] through the pulmonary arterial approach. Operative mortality rate was 4.13%[5 cases].

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.2004-2011
• /
• 2004

The applicability of the ultrasonic C-scan inspection is restricted due to the deterioration of mechanical properties of specimen during the test. Therefore, the aim of this research is applied to Eddy Current (EC) test substitute for the C-scan inspection in CFRP tube containing defects. This research is to evaluate the EC signals for the inspection of CFRP tube containing various circular hole defects (20% to 100% depth to the specimen thickness) using the unloading specimen and radial loading specimen. This study was considered the following points; 1) Analysis of EC signals for the inspection of saw-cut defect and circular hole defect, 2) The evaluation of defect depths and EC signals relationship. 3) Variation of EC signal owing to the radial load. In conclusions, the high frequency such as 300∼500 kHz made it possible to the inspection of 40% to 100% defects. Particularly, in case of 20% defect, the EC signal was not detected due to the noise of micro-crack and delamination. While the depth of the hole defects were decreasing, the difference of the phase angle between unloading specimen and radial loading specimen was gradually increasing.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제10권6호
• /
• pp.499-506
• /
• 2004

제안된 동판 표면 검사 시스템은 PC-기반으로 다중 스레드 기법과 다중 CPU를 이용해 동판 표면의 결함을 실시간으로 검사하는 시스템이다. 초고속 라인 스캔 카메라로 영상 취득 보드에 영상을 실시간으로 취득하여 처리할 때, 더블 버퍼링 방법으로 입출력과 처리가 동시에 수행되어 처리 속도를 높인다. 다중 스레드 기법에서는 시스템 자원 활용과 다중 스레드로 CPU의 사용을 최대화하여 실시간 처리하며, 다중 스레드 구조로도 실시간 처리가 어려운 경우에는 다중 CPU를 사용하여 이를 해결한다. 또한 동판 표면 영상에서 결함 검출하여 분류할 때, 실시간 처리를 만족시키기 위해서 결함영상의 공분산 행렬의 고유치 비율, 명암차 등의 연산으로 분류할 수 있는 방법을 제시한다. 결함의 검출은 조명 불균형에 대한 보상 처리가 적용된 다음 임계치에 의해 검출된다. 검출된 결함은 제안된 분류 방법으로 특징을 분석한 뒤 결함의 형태를 분류한다. 특징은 결함 너비와 고유치 비율, 명암차 등이 사용되었다. 제시된 방법을 검증하기 위해서 총 141개의 결함을 분류하는 실험이 진행되었고, 결과로는 89.4% 성공률을 보였다.

• 한국환경과학회지
• /
• 제32권11호
• /
• pp.821-831
• /
• 2023

Recently, landscaping construction has played a significant role in enhancing the quality of life for citizens by creating and maintaining outdoor spaces. However, landscaping projects vary in material procurement depending on the contracting method, and they also present various challenges in defect occurrence and defect rectification due to their specialized nature. In this study, we classified different types of projects based on material procurement ratios and conducted on-site assessments of defect status by specific processes. We also analyzed the itemization of material ratios and defect rectification costs. The results revealed it was found that projects with a higher proportion of government-provided materials had the poorest defect status in terms of planting works and also incurred the highest defect rectification costs. Moreover, conflicts concerning the responsibility for defects arose. Currently, there are no specific guidelines for setting standards for the proportion of government-provided materials in landscaping construction contracts. Furthermore, there is ambiguity in the management of defect rectification. Therefore, it is necessary to establish a systematic landscaping construction contracting framework by providing institutional guidelines tailored to local governments or the circumstances of contracting entities and to conduct thorough reviews of construction processes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.365-365
• /
• 2010

In this paper, silicon nitride thin films with different silane and ammonia gas ratios were deposited and characterized for the antireflection and passivation layer of high efficiency single crystalline silicon solar cells. As the flow rate of the ammonia gas increased, the refractive index decreased and the band gap increased. Consequently, the transmittance increased due to the higher band gap and the decrease of the defect states which existed for the 1.68 and 1.80 eV in the SiNx films. The reduction in the carrier lifetime of the SiNx films deposited by using a higher $NH_3/SiH_4$ flow ratio was caused by the increase of the interface traps and the defect states in/on the interface between the SiNx and the silicon wafer. The silicon and nitrogen rich films are not suitable for generating both higher carrier lifetimes and transmittance. These results indicate that the band gap and the defect states of the SiNx films should be carefully controlled in order to obtain the maximum efficiency for c-Si solar cells.

• Journal of Chest Surgery
• /
• 제28권1호
• /
• pp.18-22
• /
• 1995

From January 1989 to December 1993, cardiac catheterization and open heart surgery for ventricular septal defect closure were performed in 115 pediatric patients who were selected as meeting the criteria for elective closure of restrictive ventricular septal defect. These criteria included age greater than 1 year and less than 15 years, no evidence of congestive heart failure, Qp/Qs 2.0, pulmonary artery systolic pressure 35mmHg, and no associated cardiac anomalies. Mean age of patients was 5.25$\pm$ 3.53, and 72 patients were male, 43 patients were female[male:female=1.9:1 . Mean systolic pulmonary artery pressure was 19.66$\pm$4.79mmHg, and mean pulmonary to systemic flow ratio was 1.27$\pm$ 0.28. Aortic cusp prolapse was present in 30 patients [26% , aortic insufficiency was present in 1 paient, and 1 patient had prior bacterial endocarditis. There were no instances of complete atrioventricular dissociation, reoperations for bleeding, or reoperations for recurrent ventricular septal defect, but wound infection was present in 1 patient, and there were 7 patients who had the hemodynamically insignificant remnant shunt. There were no early or late deaths or major morbidity.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.72-79
• /
• 2008

The weak point of the artificial neural network(ANN) is that it is easy to fall in local minima when it learns too much nonlinear data. Accordingly, the classification ratio must be low. To overcome this weakness, the hybrid method has been proposed. That is, the ANN learns data selectively after detecting the defect position by the support vector machine(SVM). First, the SVM has been used for determination of the defect position and then the magnitude of the defect has been measured by the ANN. In off-design condition, the operation region of the engine is wide and the nonlinearity of learning data increases. The module system, dividing the whole operating region into reasonably small-size sections, has been suggested to solve this problem. In this study, the proposed algorithm has diagnosed the defects of triple components as well as single and dual components of the gas turbine engine in off-design condition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.23-27
• /
• 2008

본 논문에서는 실수코드 유전 알고리즘(RCGA)과 인공신경망(ANN)을 이용하여 항공기용 터보 축엔진의 결함 진단에 관한 연구를 수행하였다. 인공신경망만을 이용하여 엔진의 결함을 판단 할 경우 많은 학습데이터 때문에 지역 최소점으로 수렴하는 단점이 있다. 이를 개선하기 위해 전역 최소점을 찾는 능력이 뛰어난 실수코드 유전 알고리즘을 사용하였다. 5% 이내의 RMS 결함오차로 높은 결함 예측 신뢰도를 가짐을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.42-45
• /
• 2002

General wheel mark in mono-crystalline silicon wafer finding is able to be expected because it depends on radius ratio and angular velocity ratio of wafer and wheel. The pattern is predominantly determined by the contour of abrasive grits resulting from a relative motion. Although such a wheel mark is made uniform pattern if the process parameters are fixed, sub-surface defect is expected to be distributed non-uniformly because of characteristic of mono-crystalline silicon wafer that has diamond cubic crystal. Consequently it is considered that this phenomenon affects the following process. This paper focused on kinematic analysis of wafer grinding process and simulation program was developed to verify the effect of process variables on wheel mark. And finally, we were able to predict sub-surface defect distribution that considered characteristic of mono-crystalline silicon wafer