• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.429-433
• /
• 2013

PTFE composites for use of microwave substrate were fabricated by impregnation and heat treatment fabrication with glass fabric. This study shows dielectric properties such as dielectric constant and loss can be controlled by thickness of PTFE composite with change of pressure condition in heating press process. The dielectric constant of the PTFE composites has decreasing tendency as given higher pressure condition. The dielectric loss has similar result too. Especially, the case of the dielectric loss was affected by the condition of pressure at heating press and had the best performance under 3 MPa. In order to see the reason why thickness conditions make different, their microstructures were also observed.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.2
• /
• pp.125-135
• /
• 1996

Solid lipid nanoparticles(SLN) are particulate systems for parenteral drug administration and suitable for controlled release. SLN were prepared by homogenization process. Dispersion at increased temperature (molten lipid) was performed to yield SLN loaded with lipophilic drugs. Tetracaine base, lidocaine base, prednisolone, methyltestosterone and ethinylestradiol were used as model drugs to access the loading capacity and to study the release behavior. To investigate production parameters(lipids, surfactant concentration, homogenizing rpm) in the formation of SLN, particle size was performed by laser diffraction analysis. The mean particle size of SLN with stearic acid or trilaurin was below 1 micron. By decreasing the particle size and increasing the surfactant concentration, the release rate was increased especially in the case of highly lipophilic drug loaded SLN. Methyltestosterone or ethinylestradiol loaded SLN showed a distinctly prolonged release over a few days.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.169-172
• /
• 2002

In this study, the effects of the number of coat and immersion period on strength properties, waterproofness and chemical resistance of painted and immersed cement mortars using two admixture were examined. Test results showed that the flexural and the compressive strengths of the coated and immersed cement mortars increase with increasing number of coat and immersion period. The water absorption of the coated and immersed cement mortars tended to decrease with increasing number of coated and immersion period. In the case of the change of weight and the immersion period for the solutions, a decreasing tendency was shown as the immersion period increases regardless of solution, with a little variation.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.162-169
• /
• 1997

The particle size effect on the combustion characteristics of pulverized coal was investigated in the cylindrical-shape, horizontal furnace, fired in the range of 8.8∼10.6 kw. Three differently-sized fractions (5, 30, and 44 microns in average diameter) of high-volatile bituminous coal, were burned in the test furnace. Burnout behavior of pulverized coal flame were determined through the measurement of stable species concentrations (CO$_2$and H$_2$O). Concentrations of CO$_2$were compared with the theoretical values and the result showed good agreement. Thermal behavior of pulverized coal flame were determined as maximum flame temperatures occurred at fuel-rich conditions in every case. Flame lengths were also determined by decreasing with the particle size decrease. The flame length of the fine sized coal sample was comparable to that produced by distillate oil. The color of the coal flames ranged from orange to yellow, with the flame of the fine size fraction being brighter and yellower than the others.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.2
• /
• pp.90-98
• /
• 2013

The k-out-of-n system with mixed redundancy is defined as k-out-of-n system which both includes warm-standby and cold-standby components. In case that operating components in the system fail and the system needs quick transition of standby components to operation state, the k-out-of-n system with mixed redundancy is useful for decreasing system failure rate and operational cost. Reliability-Redundancy Optimization Problem (RROP) involves selection of components with multiple choices and redundancy levels for maximizing system reliability with constraints such as cost, weight, etc. A solution methodology by using harmony search algorithm for RROP of the k-out-of-n system with mixed redundancy to maximize system reliability was suggested in this study.

• Journal of the Korean Society for Heat Treatment
• /
• v.30 no.2
• /
• pp.67-73
• /
• 2017

Transformation behavior and hardness change were studied in five kinds of self-control steels; standard, high V, modified Ni, W, and high C-Ni steels. In the cooling rates of $10-100^{\circ}C/min$, the primary ferrite and bainite were formed, and the amount of the former increased with decreasing cooling rate. The bainite transformation temperature, Bs, was measured as 570, 560, 590, 575, and $565^{\circ}C$ in experimental steels, respectively, which was similar to the calculated temperature. The self-control, that is, the consistency in hardness, was observed, in which the hardness increased with the decrease in Bs. In the case of hot compression testing, the lower temperature deformation led to the enhancement in hardness.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.4
• /
• pp.227-233
• /
• 2007

In case of design of a rectifier to supply high current, To select switching frequency of semiconductor switches affect absolutely the design of the LC filter value in an power conversion circuit. The conventional rectifier by using MOSFET is no use in high current equipments because of small drain-source current. To solve this problem, this paper proposes to design of high capacity rectifier by parallel driving of MOSFET in the single half bridge DC-DC converter. This method can be able to develop high current rectifier by distributed drain-source current. The proposed scheme is able to expect a decrease in size, weight and cost of production by decreasing the LC filter value and increasing maximumly the switching frequency. The validity of the proposed parallel driving strategy is verified through computer-aided simulations and experimental results.

• Asian Journal of Business Environment
• /
• v.6 no.3
• /
• pp.5-10
• /
• 2016

Purpose - The purpose of this study is to explore and examine the effects of airline deregulation in the United States and South Korea as a comparative analysis. The study focuses on identifying the purposes of airline deregulation and analyzing its benefits and consequences. Research Design, Data, and Methodology - This is a case study, a comparative method, which analyzes and measures the benefits and disadvantages of airline deregulation in both the United States and South Korea. Results - Airline deregulation removed unnecessary and ineffective government controls, resulting in more efficient airline industries in both countries. However, the negative consequences are much greater than the benefits of airline deregulation. Conclusion - The purpose of airline deregulation was to foster an efficient and effective environment in airline industry, and clear evidence of the positive intended effects of airline deregulation e.g., increasing domestic competition, decreasing airfare, increasing productivity, and removing unnecessary government regulations in the beginning of airline deregulation. However, the current state of airline industry in both countries depicts only the consequences of airline deregulation.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.304-311
• /
• 2009

This article proposes a new time-based depreciation method using the accumulated depreciation rate function. The method can systematically compute the depreciation charge of each period, in every case where the charge is constant or decreasing or increasing, and solve the problems of depreciation methods currently used, by obtaining the accumulated depreciation charge at any given time. We can choose diverse rational depreciation types for the characteristic of every asset with the new method, and compute the depreciation charge with consistency in all cases where assets are owned for partial period.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2010.05a
• /
• pp.3-14
• /
• 2010

Through time-series plots, we can see relatively stable trend of energy factor share and the decreasing trend of relative energy prices (to wages) in Korea. We can compromise these empirical facts with the following explanation: if elasticity of substitution between capital and energy is smaller than one(<1) in Korea, a change(decrease) in energy price can prevent income share of resources from rising in the process of economic growth. This is consistent with theoretical and empirical results that substitution between energy and capital is so difficult. From simple empirical analysis and limited information, we can carefully infer that, in the past in Korea, resource-specific innovation was performed widely. Finally, If we are to reduce the magnitude of "growth drag", we should decrease energy factor share. This can be accomplished by energy-augmenting technical progress in the case of elasticity of substitution less than 1 as in Korea.