• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1617-1620
• /
• 2005

The current control for interior permanent magnet machines is more complicate than surface permanent magnet machine because of its torque characteristic depending on the reluctance. For high performance torque control, it requires state decoupling between the d-current and q-current dynamics. However the variation of the inductances, which couples the state dynamics of the currents, makes the state decoupling difficult. So some decoupling methods have developed to cope this variations and each current can be regulated independently. This paper presents a novel approach for fully decoupling the states cross-coupling using parameter adaptation. The adaptation method is based on the error between reference currents and the currents with state decoupling which have to follow the references. This method is more object-oriented than the other online parameter estimation methods in IPM machine and other electrical machines

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1648-1654
• /
• 2016

This paper analyzes complex vector current control for the enhanced cross-coupling compensation in accordance with parameter variation in grid-connected inverter system, and verifies through simulation and experiment. Complex vector current control is performed in the synchronous reference frame through d-q transformation. It generates cross-coupling components with rotating nominal angular frequency. In general, cross-coupling elements are compensated by decoupling terms added to output of conventional decoupling PI controller. But, it is impossible to compensate them perfectly which transient response is especially deteriorated such as large overshoot and slow tracking, when variation of grid impedance or measurement error occurs. However, complex vector current control can improve stability and response characteristic of current control regardless of the situation as before. Decoupling controller and complex vector controller are represented through complex forms, and these controllers are analyzed by using frequency response in s-domain, respectively. It is verified that complex vector controller has more superior response characteristic than decoupling controller through MATALB, PSIM and experimental in 5kW grid-connected inverter when L filter parameter is varied from 1.1mH to increase double, 2.2mH.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.33-42
• /
• 1998

If a ship diesel engine is operated by consolidated control with Controllable Pitch Propeller(CPP), the minimum fuel consumption is achieved together with the demanded ship speed. For this, it is necessary that the ship is operated on the ideal operating line which satisfies the minimum fuel consumption and that the pitch angle of CPP and throtle valve angle are controlled simultaneously. In this point of view, this paper presents a controller design method for a ship propulsion system with CPP based on the decoupling control theory. To do this, Linear Matrix Inequality(LMI) approach is introduced for the control system to satisfy the given $H_\infty$ control performance and robust stability in the presence of physical parameter perturbations. The validity and applicability of this approach are illustrated by simulation in the all operating ranges.

• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.17-23
• /
• 2013

The regulation of currents in a three-phase load is an important issue for electric power systems. The most popular conventional method is a decoupling controller that compensates the coupling terms arising from DQ rotating frame transformation. Although the decoupling controller achieves decent performance in the absence of load parameter uncertainties, the variation of parameters causes performance to degrade intolerably. In this paper, we propose to use disturbance observer based controller to improve the control performance in spite of the parameter uncertainties. The computer simulation study validates the effectiveness of the proposed method.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1708-1719
• /
• 2018

A complete current loop decoupling control strategy based on a sliding mode observer (SMO) is proposed to eliminate the influence of current dynamic coupling and back electromotive force (EMF) in the vector control of permanent magnet synchronous motors. With this strategy, current dynamic decoupling and back EMF compensation can be simultaneously achieved. Unlike conventional methods, the proposed strategy can avoid the disturbances caused by the parametric variations of motor systems and maintain the advantages of proportional integral (PI) controllers, which are robust and easy to operate. An improved SMO, which uses a special PI regulator other than a linear saturation function as the equivalent control law in the boundary layer of a sliding surface, is proposed to eliminate the estimated errors caused by the quasi-sliding mode and obtain a satisfactory decoupling performance. The stability and parameter robustness of the proposed strategy are also analyzed. Physical experimental results are presented to verify the validity of the method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.842-848
• /
• 2005

The decoupling control using state feedback was once intensively studied during 1960's by many researchers. However, this control scheme was sensitive to the disturbance and Parameter variations. SMC(sliding mode control) is known as a robust control methodology to overcome such a disturbance. In this paper. the decoupling control by means of SM(sliding mode) for a trajectory control of a two-degrees-of- freedom manipulator was discussed. The position and velocity of manipulator tip were adopted to compose a nonlinear error functions. The reference inputs of the controller can be decided by switching function combined with the desired position and velocity. Simulation result is provided to verify the effectiveness of the proposed control scheme.

• Structural Engineering and Mechanics
• /
• 제25권2호
• /
• pp.181-200
• /
• 2007

A decoupling technique for simulating near-field wave motions in two-phase media is introduced in this paper. First, an equivalent but direct weighted residual method is presented in this paper to solve boundary value problems more explicitly. We applied the Green's theorem for integration by parts on the equivalent integral statement of the field governing equations and then introduced the Neumann conditions directly. Using this method and considering the precision requirement in wave motion simulation, a lumped-mass FEM for two-phase media with clear physical concepts and convenient implementation is derived. Then, considering the innate attenuation character of the wave in two-phase media, an attenuation parameter is introduced into Liao's Multi-Transmitting Formula (MTF) to simulate the attenuating outgoing wave in two-phase media. At last, two numerical experiments are presented and the numerical results are compared with the analytical ones demonstrating that the lumped-mass FEM and the generalized MTF introduced in this paper have good precision.

• 한국정보통신학회논문지
• /
• 제13권3호
• /
• pp.514-521
• /
• 2009

영구자석 매입형 동기 전동기(IPM : Interior-mounted Permanent Magnet Motor)의 전류제어는 릴럭턴스에 의존하는 최대토크 특성 때문에 표면부착형 동기전동기(SPM : Surface-mounted Permanent Magnet Motor)보다 더 복잡하다. 그러므로 고성능 토크제어를 위해서는 d축 전류와 q축 전류의 상태 디커플링이 필요하다. 하지만 상태들 사이에 영향을 미치는 인덕턴스의 변화 때문에 상태 디커플링이 어렵다. 그러므로 이 변화에 대처할 수 있는 상태 디커플링 방법의 개발이 필요하며 이를 이용한 전류의 독립제어가 필요하다. 본 논문에서는 IPM모터 에 대하여 가상 상태를 갖는 슬라이딩 모드 제어를 이용하여 상태 디커플링이 가능한 접근법을 제안한다. 제안된 슬라이딩 평면은 의란과 불확실성이 존재하더라도 PI 전류 제어기에 의해서 제어되는 공칭 시스템의 동특성을 가질 수 있다.

• 한국컴퓨터정보학회논문지
• /
• 제28권12호
• /
• pp.221-229
• /
• 2023

최근 전력 계통에 인공 관성, 감쇠, 블랙스타트 기능, 독립 운전 기능 등을 제공할 수 있어 많은 주목을 받고 있는 Grid-forming(GFM) 컨버터는 저전압 Microgrids(MG)에서 낮은 라인 임피던스의 X/R 비율과 작지 않은 전력각으로 인한 유효전력과 무효전력 간의 커플링 현상이 발생한다. 이러한 전력 커플링 현상은 GFM 컨버터의 안정성 및 성능 저하 문제, 부정확한 전력 공유 문제, 제어 파라미터 설계 문제를 유발하고 있다. 따라서 본 논문은 GFM 컨버터와 관련된 제어 방법뿐만 아니라 전력 디커플링 방법에 대한 검토 연구로서, 유망 제어 방법을 소개하고 전력 디커플링 방법에 대한 비판적 검토를 통하여 향후 연구 활동의 접근성을 높이고자 하였다. 이에 따라 전력디커플링 방법 연구를 위해 향후 연구자들이 쉽게 접근할 수 있어 분산 발전원 확대에 기여할 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.20-24
• /
• 1989

The time optimal position control scheme can be repeatedly taken from the initial state of a dynamic system to a desired one as fast as possible at the industrial drives. In this case, the machine parameters will vary due to temperature, frequency, and saturation effects. In particular, the rotor resistance value changes dramatically with temperature and frequency. These changes affect the command values of the stator current components and slip speed. There is a mismatch between the commanded variables and actual variables of the induction motor drive, and this situation leads to decoupling of the vector controller from the plant, i.e the induction motor. Consequences of such decoupling include the initiation of oscillations of the rotor flux and unsuitable switching of electromagnetic torque of the induction motor servo drive. Therefore, a rotor resistance parameter compensating method for the induction motor is described.