• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.195-198
• /
• 2003

Epoxidized polybutadiene (EPB) was prepared by polybutadiene (PB) with m-chloroperbenzoic acid (MCPBA) in homogeneous solution. EPB was blended with poly(3-hydroxybutyrate) (PHB) up to 30 wt% by solution-precipitation procedure. The thermal decomposition of PHB/EPB blends was studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). The thermograms of PHB/EPB blends contained a two-step degradation process, while that of pure PHB sample exhibited only one-step degradation process. This degradation behavior of PHB/EPB blends, which have a higher thermal stability as measured by maximum decomposition temperature and residual weight, is probably due to crosslinking reactions of the epoxide groups in the EPB component with the carboxyl chain ends of PHB fragments during the degradation process, and the occurrence of such reactions can be assigned to the exothermic peaks in their DTA thermograms.

• Journal of Korean Society for Quality Management
• /
• v.41 no.2
• /
• pp.233-248
• /
• 2013

Purpose: This study develops heuristic process capability indices (PCIs) using distribution-decomposition methods and evaluates the performances. The heuristic methods decompose the variation of a quality characteristic into upper and lower deviations and adjust the value of the PCIs using decomposed deviations in accordance with the skewness. The weighted variance(WV), new WV(NWV), scaled WV(SWV), and weighted standard deviation(WSD) methods are considered. Methods: The performances of the heuristic PCIs are investigated under the varied situations such as various skewed distributions, sample sizes, and specifications. Results: WV PCI is the best under the normal populations, WSD and SWV PCIs are the best under the low skewed populations, NWV PCI is the best under the moderate and high skewed populations. Conclusion: Comprehensive analysis shows that the NWV method is most adequate for a practical use.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.11a
• /
• pp.119-123
• /
• 2005

The thermochemical splitting of water has been proposed as a clean method for hydrogen production. The IS process is one of the thermochemical water splitting processes using iodine and sulfur as reaction agents. HI decomposition procedure to obtain hydrogen is one of the key operations in the process, because equilibrium conversion of HI is low (22% at $450^{\circ}C$). The silica membranes prepared by CVD. method were applied to the decomposition reaction of HI vapor. The permeation characteristics of hydrogen and nitrogen belong to the Knudsen flow pattern.

• Journal of Environmental Science International
• /
• v.11 no.7
• /
• pp.743-748
• /
• 2002

UV photolysis process is little known in parts of air pollution treatment, so there are not many applications in field. Therefore we have to do more experiment and study application possibility for treatment of VOCs(Volatile organic compounds). To solve these problems, we have been studying for simultaneous application of this technology. It has shown that concentration of TCE and B.T.X., diameter of reactor and wavelength of lamp have effected on decomposition efficiency. Analysis of TCE and B.T.X. concentration was carried out by GC-FID. A cylinderical reactor consisting of a quartz tube and a centrally located lamp(${\psi}25mm$) was used. The length and diameter of reactor were 1800mm, 75mm. It has shown that the generated ozone concentration goes up 250ppm when using 64watt ozone lamp. When using Photolysis process only, the rates of fractional conversion of each material are TCE 79%, Benzene 65%, Toluene 68%, Xylene 76%. This phenomenon can be rationalized in terms of the different bond energy that indicates how easily VOCs species can be decomposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.140-148
• /
• 2004

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based supporting for this integration if desirable. For this integration and process planning in the early design stage, the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function of product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• International Journal of Safety
• /
• v.1 no.1
• /
• pp.52-57
• /
• 2002

The Decomposition of NO$_2$ (nitrogen dioxide), one of the Hazardous Air Pollutant (HAP), was studied by utilizing the SPCP (Surface induced discharge Plasma Chemical Processing) reactor so as to obtain optimum process variables and maximum decomposition efficiencies. Experimental results showed that for the frequency of 10kHz, the highest deco position efficiency of 84.7% for NO$_2$ was observed at the power consumptions of 20W. The decomposition efficiency of $NO_2$ was found to be: 1) proportional to the residence times, and inversely proportional to the initial concentrations of $NO_2$; 2) the maximum when the electrode diameter was 3mm; 3) influenced by the electrode material, decreasing in the order of W>Cu>Al; and 4) proportional to the $CH_4$ content, due to which the highest efficiency of 98% was obtained with almost all the $NO_2$ removed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.27-37
• /
• 2013

CFCs (Chlorofluorocarbons) and HCFCs (Hydrochlorofluorocarbons) that are chemically stable were proven to be a greenhouse gases that can destroy ozone layer. On the other hand, HFCs (Hydrofluorocarbons) was developed as an alternative refrigerant for them, but HFCs still have a relatively higher radiative forcing, resulting in a large Global Warming Potential (GWP) of 1,300. Current regulations prohibit production and use of these chemicals. In addition, obligatory removal of existing material is in progress. Methods for the decomposition of these material can be listed as thermal cracking, catalytic decomposition and plasma process. This study reports the development of low cost and high efficiency plasma scrubber. Stability of steam plasma generation and effect of plasma parameters such as frequency of power supply and reactor geometry have been investigated in the course of the development. Method for effective removal of by-product also has been investigated. In this study, elongated rotating arc was proven to be efficient in decomposition of HFCs above 99% and to be able to generate stable steam plasma with steam contents of about 20%.

• Journal of Hydrogen and New Energy
• /
• v.22 no.4
• /
• pp.415-423
• /
• 2011

HI decomposition step certainly demand catalytic reaction for efficient production of hydrogen in SI process. Platinum catalyst can apply to HI decomposition reaction as well as hydrogenation or dehydrogenation. Generally, noble metal is used as catalyst which is loaded form for getting high dispersion and wide active area. In this study, Pt was loaded onto zirconia, ceria, alumina, and silica by impregnation method. HI decomposition reaction was carried out under the condition of $450^{\circ}C$, 1atm, and $167.76h^{-1}$ (WHSV) in a fixed bed reactor for measuring catalytic activity. And property of a catalyst was observed by BET, TEM, XRD and chemisoption analysis. On the basis of experimental results, we discussed about conversion of HI according to physical properties of the loaded Pt catalyst onto each support.

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.3
• /
• pp.71-77
• /
• 2012

This study gives the optimal reaction conditions, reaction mechanisms, reaction rates leaded from the oxidation of phenol by electron beam accelerator and ozone used for recent water treatment. It gives the new possibility of water treatment process to effectively manage industrial sewage containing toxic organic compounds and biological refractory materials. The high decomposition of phenol was observed at the low dose rate, but at this low dose rate, the reaction time was lengthened. So we must find out the optimal dose rate to promote high oxidation of reactants. The reason why the TOC value of aqueous solution wasn't decreased at the low dose was that there were a lot of low molecular organic acids as an intermediates such as formic acid or glyoxalic acid. In order to use both electron beam accelerator and biological treatment for high concentration refractory organic compounds, biological treatment is needed when low molecular organic compounds exist abundantly in sewage. In this experiment, the condition of making a lot of organic acids is from 5 kGy into 20 kGy dose. Decomposition rate of phenol by electron beam accelerator was first order reaction up to 300ppm phenol solution on the basic of TOC value and also showed first order reaction by using both air and ozone as an oxidants.

• Korean Journal of Food Science and Technology
• /
• v.17 no.2
• /
• pp.71-74
• /
• 1985

In the present study, a tentative mechanism for the decomposition of the hydroperoxide formed during the thermal oxidation of an edible soybean oil was proposed. The soybean oil was thermally oxidized at $120^{\circ}C$ for 7 hrs with air injection at a rate of 120 ml/min. Through kinetic studies of the decomposition process based on the tentative mechanism and the actual experimental data obtained from the hydroperoxide decomposition at 100, 120, 150 and $180^{\circ}C$, it was found that the reaction order of the hydroperoxide decomposition in these conditions was of first order. It was also estimated that the dissociation energy for the hydroperoxide in the same conditions was 15.876 kcal/g. mol.