• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.532-539
• /
• 2011

The physical and chemical properties of the dried low rank coals (LRCs) before and after the surface treatment using ozone and ammonia were characterized in this study. The contents of moisture, volatiles, fixed carbon and ash consisting of dried LRCs before the surface treatment were about 2.0, 44.8, 44.9 and 8.9%, respectively. Also, it was composed of carbon of 62.66%, hydrogen of 4.33%, nitrogen of 0.94%, oxygen of 27.01% and sulfur of 0.09%. The dried LRCs was surface-treated with the various dry methods using gases such as ozone at room temperature, ammonia at $200^{\circ}C$ and then the dried LRCs before and after the surface treatment were characterized by the various analysis methods such as FT-IR, TGA, proximate and elemental analysis, caloric value, ignition test, adsorption of $H_2O$ and $NH_3-TPD$. As a result, the oxygen content increased and the calorific value, ignition temperature and the contents of carbon and hydrogen relatively decreased because the oxygen-contained functional groups were additionally generated by the surface oxidation with ozone which plays a role as an oxidant. Also, its $H_2O$ adsorption ability got higher because the hydrophilic oxygen-contained functional groups were additionally generated by the surface oxidation with ozone. On the other hand, it was confirmed that the dried LRCs after the surface treatment with $NH_3$ at $200^{\circ}C$ have the decreased oxygen content, but the increased calorific value, ignition temperature and contents of carbon and hydrogen because of the decomposition of oxygen-contained functional groups the on the surface. In addition, the $H_2O$ adsorption ability was lowered bucause the surface of the dried LRCs might be hydrophobicized by the loss of the hydrophilic oxygen-contained functional groups. It was concluded that the various physico-chemical properties of the dried LRCs can be changed by the surface treatment.

• Journal of Life Science
• /
• v.32 no.7
• /
• pp.510-522
• /
• 2022

In this study, to biosynthesize PHA with properties more similar to polypropylene, a Bacillus sp. EMK-5020 strain that biosynthesized poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was isolated from soil. Bacillus sp. EMK-5020 strain biosynthesized PHBV containing 1.3% 3-hydroxyvalerate (3HV) using reducing sugar contained in Makgeolli lees enzymatic hydrolysate (MLEH) as a single carbon source. As the amount of propionic acid, which was added as a second carbon source, increased, the content of 3HV also increased. PHBV containing up to 48.6% of 3HV was synthesized when 1.0 g/l of propionic acid was added. Based on these results, the strain was cultured for 72 hr in a 3 l fermenter using reducing sugar in MLEH (20 g/l) and propionic acid (1 g/l) as the main and secondary carbon sources, respectively. As a result, 6.4 g/l DCW and 50 wt% of PHBV (MLEH-PHBV) containing 8.9% 3HV were biosynthesized. Through gel permeation chromatography and thermogravimetric analysis, it was confirmed that the average molecular weight and the decomposition temperature of MLEH-PHBV were 152 kDa and 273℃, respectively. In conclusion, the Bacillus sp. EMK-5020 strain could biosynthesize PHBV containing various 3HV fractions when MLEH and propionic acid were used as carbon sources, and PHBV-MLEH containing 8.9% 3HV was confirmed to have higher thermal stability than standard PHBV (8% 3HV).

• Analytical Science and Technology
• /
• v.35 no.3
• /
• pp.136-142
• /
• 2022

According to media reports, the carcasses of euthanized abandoned dogs were processed at high temperature and pressure to make powder, and then used as feed materials (meat and bone meal), raising the possibility of residuals in the feed of the anesthetic ketamine and dexmedetomidine used for euthanasia. Therefore, a simultaneous analysis method using QuEChERS combined with high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry was developed for rapid residue analysis. The method developed in this study exhibited linearity of 0.999 and higher. Selectivity was evaluated by analyzing blank and spiked samples at the limit of quantification. The MRM chromatograms of blank samples were compared with those of spiked samples with the analyte, and there were no interferences at the respective retention times of ketamine and dexmedetomidine. The detection and quantitation limits of the instrument were 0.6 ㎍/L and 2 ㎍/L, respectively. The limit of quantitation for the method was 10 ㎍/kg. The results of the recovery test on meat and bone meal, meat meal, and pet food showed ketamine in the range of 80.48-98.63 % with less than 5.00 % RSD, and dexmedetomidine in the range of 72.75-93.00 % with less than 4.83 % RSD. As a result of collecting and analyzing six feeds, such as meat and bone meal, prepared at the time the raw material was distributed, 10.8 ㎍/kg of ketamine was detected in one sample of meat and bone meal, while dexmedetomidine was found to have a concentration below the limit of quantitation. It was confirmed that the detected sample was distributed before the safety issue was known, and thereafter, all the meat and bone meal made with the carcasses of euthanized abandoned dogs was recalled and completely discarded. To ensure the safety of the meat and bone meal, 32 samples of the meat and bone meal as well as compound feed were collected, and additional residue investigations were conducted for ketamine and dexmedetomidine. As a result of the analysis, no component was detected. However, through this investigation, it was confirmed that some animal drugs, such as anesthetics, can remain without decomposition even at high temperature and pressure; therefore, there is a need for further investigation of other potentially hazardous substances not controlled in the feed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.4
• /
• pp.365-372
• /
• 2022

Cellobiose is a dissacharide constituted by two glucose units joined by a β-('1,4') glycosidic bond that is produced by the decomposition of cellulose. This product exists naturally in plants and has been utilized in different industries as a food sweetener, and as a cosmetic and pharmaceutical material. In this study, the potential of cellobiose as a whitening cosmetic product was evaluated by analyzing autophagy induction and the inhibition of melanin production. A cytotoxicity test conducted in the human melanin-producing cell line MNT-1 with increasing concentrations of cellobiose revealed that this compound did not cause cytotoxicity at 20 mg/mL or less. Based on this, autophagy was firstly evaluated by immunostaining with the autophagy marker microtubule-associated protein 1 light chain 3 (LC3) after treatment with 20 mg/mL of cellobiose. The subsequent confocal microscopy analysis revealed an increase in LC3 puncta, indicating induction of autophagy. In addition, autophagy was further confirmed by western blot analysis, which demonstrated that cellobiose converted LC3-I to LC3- ∏ in a concentration- and time-dependent manners. An analysis of melanin contents after cellobiose treatment at a concentration of 20 mg/mL during 7 days revealed that melanin production was reduced by more than 50%. Additionally, the expression levels of melanogenesis-related proteins TYR and TYRP1 were markedly decreased after cellobiose treatment. Based on these studies, a cosmetic cream formulation containing cellobiose was prepared and the change in formulation was tested for 4 weeks, and it was confirmed that the appearance changed to liquid form at high temperature, but the pH did not change. In conclusion, the present research demonstrated that cellobiose activates autophagy and inhibits melanin production, and showed the potential of this product as a material for whitening cosmetics.

• Journal of Environmental Health Sciences
• /
• v.49 no.2
• /
• pp.66-77
• /
• 2023

Background: Along with the increase in consumer interest in and consumption of tattoo products, the controversy over harmful heavy metals associated with the use of tattoo cosmetics is also increasing. Therefore, investigation of hazardous metals in these tattoo products is needed. Objectives: This study was performed to provide useful data for establishing reasonable standards to securely manage tattoo cosmetics, tattoo stickers, and tattoo inks distributed in the market. Methods: Thirteen kinds of hazardous metal contents (Pb, As, Cd, Sb, Ni, Co, Cu, Cr, Se, Ba, Zn, Sn, and Hg) were analyzed for 23 tattoo cosmetics, ten tattoo stickers, and 16 tattoo inks. Hg was measured through the combustion-gold amalgamation method, and other hazardous metals were measured by inductively coupled plasma-mass spectrometry (ICP-MS) after acidic decomposition using a microwave apparatus. Results: The detected ranges of Pb, As, Cd, Sb, Ni, and Hg in tattoo cosmetics were 0.07~1.18, 0.06~0.41, ND~0.07, 0.01~3.44, 0.12~2.75, and ND~0.01 ㎍/g, respectively. All of the hazardous metals detected were below the recommended maximum standards of the Ministry of Food and Drug Safety. The mean amount of Pb detected in tattoo stickers for children was 0.24 ㎍/kg and Cd was not detected, meaning both metals met the recommended criteria. There was no statistically significant difference in all measured metals between children's tattoo stickers and adults' tattoo stickers. In the results of the study on the hazardous metal content of tattoo inks, four products (25%) for Pb, one product (6%) for As, 13 products (81%) for Ni, four products (25%) for Cu, and five products (31%) for Zn exceeded the recommended standards approved by the government. The highest predicted exposure amount for hazardous metals exceeding the recommended level of tattoo inks in a single tattooing was 5.69 ㎍/kg for Ni, 8.51 ㎍/kg for Zn, 0.44 ㎍/kg for Pb, 8.07 ㎍/kg for Cu, 0.44 ㎍/kg for As, and 71.36 ㎍/kg for Ba. Conclusions: It is necessary to prepare criteria for content limitation for the management of Co, Cr, Ba and Se tattoo cosmetics, and tattoo inks require thorough quality control.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.103-114
• /
• 2023

The Christian Museum of Gongju Jeil Church was first built in 1931 and was largely damaged during the Korean War, but the walls and chimneys have been preserved. This building has a high architectural values in that the chapel was reconstructed in 1956, and maintains its original form through repair of damaged parts rather than new construction. The stained glass windows were as installed in 1979 and has a great significance in the Dalle de Verre method using lump glass. However, some of the stained glass damaged partially, such as various cracks and splits, and vertical and horizontal cracks in the joint fillers of supporting the colored glass. As the structural materials of the stained glass window, an iron frame and cement mortar filled with it were used, and corrosion of iron, cracking of mortar and granular decomposition appear partially due to weathering. In the joint fillers, the content of Ca and S is very high, indicating that gypsum were used as admixtures, and the gypsums grow in a rhombohedral and forms a bundle, which is investigated to have undergone recrystallization. As a result of modeling the ultrasonic velocity at the joint fillers, the left and right windows at the entrance show relatively weak in the range of 800 to 1,600m/s, and the lower right corner of the altar window and the upper left corner of the center window were also 1,000 to 1,800m/s, showing relatively low physical properties. And gypsums produced during the neutralization of lime mortar were detected in the joint fillers and contaminants on the surface. Such salts may cause damage to the joint material due to freezing and thawing, so appropriate preventive conservation is required. Also, since various damage types are complexly appearing in stained glass window and joint filler, customized conservation treatment should be reviewed through clinical tests.

• Atmosphere
• /
• v.32 no.1
• /
• pp.61-70
• /
• 2022

This study evaluates the economic values for the several first precipitation events during Changma period. The selected three years are 2015, 2019, and 2020, where average precipitation amounts across the 58 Korean stations are 12.8, 20.1 and 13.3 mm, respectively. The four categories are used to assess the values including air quality improvement, water resource acquisition/accumulation, drought mitigation, and forest fire prevention/recovery. Economic values for these three years are estimated 50~150 billion won. Among the four factors considered, the effect of air quality improvement is most highly valued, amounting to 70 to 90% of the total economic values. Wet decomposition of air pollution (PM₁₀, NO₂, CO, and SO₂) is the primary reason. The next valuable element is water resource acquisition, which is estimated 9~15 billion won. Effects of drought mitigation and fire prevention are deemed relatively small. This study is the first to estimate the value of the precipitation events during Changma onset. An analysis for more Changma years will be performed to achieve a more reliable estimate.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.1
• /
• pp.13-21
• /
• 2022

Mushroom waste medium refers to the waste biomass generated after mushroom cultivating. And, the burden of treatment on mushroom farmhouse is increasing due to the absence of appropriate treatment method and increase of treatment costs of the mushroom waste medium. In this study, in order to assess the energy value of mushroom waste medium by an anaerobic digestion, methane potential and anaerobic organic matter decomposition characteristics were investigated. The theoretical methane potential(B_th) of mushroom medium(MM) was 0.481 Nm³-CH₄/kg-VS_added, and the B_th of mushroom waste medium(MWM) was 0.451 Nm³-CH₄/kg-VS_added. The biochemical methane potential(B_u-exp) of MWM was increased by 18% from 0.155 for MM to 0.183 Nm³-CH₄/kg-VS_added for MWM. In the reaction kinetics analysis by the Modified Gompertz model, the maximum methane production rate(R_m) was increased from 4.59 for MM to 7.21 mL/day for MWM and the lag growth phase time(λ) was decreased from 2.78 for MM to 1.96 days for MWM. In the reaction kinetics analysis by the parallel first order kinetics model, the easily degradable organic matter(VS_e) content was increased by 5.89% and the persistently degradable organic matter(VS_p) content was 2.03% in MWM, and the non-degradable organic matter(VS_NB) content was decreased by 7.85%. Therefore, it was evaluated that the anaerobic digestion efficiency of MWM was increased. The anaerobic digestion efficiency of MWM was assessed to be more improved than that of MM.

• Korea Trade Review
• /
• v.42 no.2
• /
• pp.145-174
• /
• 2017

Recently, due to the worsening global economic recession, Korea which is a small, export-oriented economy has decreased exports and the domestic economy also continues to stagnate. Therefore, for continued growth of our economy through export growth, we need to analyze the validity of export support system such as export insurance and prepare ways to expand exports. This study is to investigate the effects of Export Insurance on the exports of SMEs as well as LEs. For this purpose, this study conducted Time Series Analysis using data such as export, export insurance acquisition, export price index, exchange rate, and coincident composite index(CCI). First, as a result of the Granger Causality Test, the exports of LEs has found to have a causal relationship with the CCI, and CCI is to have a causal relationship with the short-term export insurance record. Second, the results of VAR analysis show that the export insurance acquisition result and the export price index have a positive effect on the exports of LEs, while the short - term export insurance has a negative effect on the exports of LEs. Third, as a result of variance decomposition, the export of LEs has much more influenced for mid to long term by the short-term export insurance acquisition compared to SMEs. Fourth, short-term export insurance has a positive effect on exports of SMEs. In order to activate short-term export insurance against SMEs, it is necessary to expand support for SMEs by local governments. This study aims to suggest policy implications for establishing effective export insurance policy by analyzing the effects of export insurance on the export of SMEs as well as LEs. It is necessary to carry out a time series analysis on the export results according to the insurance acquisition results by industry to measure the export support effect of export insurance more precisely.