• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.169-175
• /
• 1993

Possibility of fatigue failure in punching shear of reinforced concrete decks of highway bridges is analytically investigated by applying Matsui et al.'s experimental finding to models of 2-meter span decks designed in compliance with previous and current codes. Decks made of concrete of compressive strength of 240㎏/㎠ showed longer fatigue life than decks made of 210㎏/㎠ concrete at the same Md/U rations ; higher Md/U ratio resulted in linger fatigue life but its effect is insignificant in decks having effective depths of 14 and 15cm. Decks designed to higher load factors as specified by current codes showed longer fatigue life than decks designed to lower load factors specified by previous codes ; yet fatigue failure appeared to occur in both decks within their normal life span, thus indicating need for redefining the minimum deck thickness.

• 복합신소재구조학회 논문집
• /
• 제6권3호
• /
• pp.14-19
• /
• 2015

In this study we developed an integrated precast concrete decks for a rapid construction. The structural performance in the integrated precast bridge decks is evaluated by real-scale test bed and detailed finite element analyses. The numerical analysis results were compared with the experimental data from a real-scaled single-span precast/prestressed concrete bridge decks under truck loading. Parametric studies are focused on the various effects of external loads on the structural behavior for different locations and measuring points on the precast bridge decks. The assessment in this study indicates that the integrated precast bridge decks show an excellent structural performance as expected.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.390-393
• /
• 2006

LB-DECK is used for both of permanent formwork and structural component with cast-in place concrete of concrete bridge decks. Current Korean design code recommends that concrete bridge deck with precast concrete panels have to be designed only using conventional flexural design method and does not allow the empirical design method which is based on punching shear strength of bridge deck. This paper present experimental test results of punching shear strength of concrete bridge decks with LB-DECKs. Six full-scaled concrete bridge decks, which are designed with the empirical design method, are fabricated with variation of girder spacings. Test results are presented in the paper and compared with the code predictions of ACI 318, CEB-FIP MC90. Based on the test results, it is proposed that LB-DECK is suitable to apply the empirical design method for concrete bridge decks.

• Steel and Composite Structures
• /
• 제17권3호
• /
• pp.339-358
• /
• 2014

Exodermic deck systems are new composite steel grid deck systems which have been used in various projects during the past decade. One of the eminent features of this system is considerable reduction in the structure weight compared to the ordinary reinforced concrete decks and also reduction in construction time by using precast Exodermic decks. In this study, dynamic properties of the Exodermic deck bridges with alternative perfobond shear connectors are investigated experimentally. In order to evaluate the dynamic properties of the decks, peak picking and Nyquist circle fit methods are employed. Frequencies obtained experimentally are in good agreement with the results of the finite-element solution, and the experimental results show that the first mode is the most effective mode among the obtained modes. The first four modes are the rigid translational motion modes, and the next two modes seem to be rigid rotational motion modes around a horizontal axis. From the 7th mode onwards, modes are flexible. The range of damping ratios is about 0.5%. Furthermore, the static behavior of the Exodermic decks under a static load applied at the center of the decks was investigated. Failure of the decks under positive bending was punching-shear. The bending strength of the decks under negative bending was about 50 percent of their strength under positive bending. In addition, the weight of an Exodermic deck is about 40% of that of an equivalent reinforced concrete slab.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권4호
• /
• pp.61-68
• /
• 2017

교량 바닥판은 대형 차량 및 제설제와 같은 다양한 환경 요인으로 인해 급속히 악화되는 부재이다. 한국에 건설된 교량의 수명이 길어짐에 따라 교량 바닥판의 교체 수요가 증가 할 것으로 예상된다. 다른 국가에서는 프리 캐스트 바닥판을 이용한 급속 교량 건설 기술이 열화된 교량 바닥판의 교체 수요 대응을 위해 적극적으로 사용되고 있다. 본 연구에서는 국내 교량 바닥판의 상태평가 데이터를 수집 및 분석하여 교량 바닥판 열화 모델을 제안 하였다. 또한 교량 규모의 관점에서 열화된 교량 바닥판의 미래 대체 수요를 예측하였다.

• 한국강구조학회 논문집
• /
• 제13권6호
• /
• pp.631-640
• /
• 2001

본 연구에서는 노후화된 교량 대체용으로 복합재료 교량 바닥판의 거동에 대하여 실험적인 방법으로 조사하였다. 바닥판의 성능평가와 관련하여 총 5개의 시험체를 1/10 축소모형 시험체로 제작하고 실험을 실시하였다. 3개의 시험체는 강성을 확보키 위해 알루미늄 코아를 갖는 샌드위치 상부플랜지와 라미네이트(Laminate) 상부플랜지 형식 2개, 총 5개의 시험체를 제작 하였다. 바닥판 구성요소는 유리섬유와 에폭시재료(glass fiber/epoxy)를 사용하여 제작하였다. 시험체의 최대내력, 강성 및 변형성능에 대한 결과를 요약하였다. 또한 실험결과의 타당성을 검증하고자 유한요소해석의 결과와 비교하였다.

• 대한토목학회논문집
• /
• 제36권3호
• /
• pp.375-384
• /
• 2016

현행, 도로교설계기준에서는 교량바닥판에 대해 지간이 짧은 다거더 플레이트 거더교 위주의 규정을 두고 있으며, 강합성 소수 거더교에 적용되는 장지간 바닥판에 대한 설계규정은 명확하게 없는 실정이다. 이는 소수 거더교의 장지간 바닥판에 적용하기에는 한계가 있으므로 합리적인 설계를 위해서는 관련 규정을 보완할 필요가 있다. 따라서, 본 연구에서는 내측부 교량바닥판의 지간 6.0~12.0m 범위를 대상으로 도로교설계기준의 KL-510 하중을 적용하여 교축방향(종방향)과 교축직각방향(횡방향)에 대한 설계휨모멘트를 제안하였다. 설계휨모멘트는 바닥판의 직교 이방성, 거더의 강성, 그리고 다차로재하계수의 영향이 반영되었으며, 이를 기존의 DB-24 하중에 대한 설계휨모멘트와 비교하였다.

• Wind and Structures
• /
• 제22권2호
• /
• pp.161-184
• /
• 2016

Long-span suspension bridges have evolved through the years and with them, the bridge girder decks improved as well, changing their shapes from standard box-deck girders to twin box and multi-box decks sections. The aerodynamic characteristics of the new generation of twin and multiple-decks are investigated nowadays, to provide the best design wind speeds and the optimum dimensions such bridges could achieve. The multi-box Megane bridge deck is one of the new generation bridge decks, consisting of two side decks for traffic lanes and two middle decks for railways, linked between them with connecting beams. Three-dimensional CFD simulations were performed by employing the Large Eddy Simulation (LES) algorithm with a standard Smagorinsky subgrid-scale model, for $Re=9.3{\times}10^7$ and angles of attack ${\alpha}=-4^{\circ}$, $-2^{\circ}$, $0^{\circ}$, $2^{\circ}$ and $4^{\circ}$. Also, a wind tunnel experiment was performed for a scaled model, 1:80 of the Megane bridge deck section, for $Re=5.1{\times}10^5$ and the aerodynamic static coefficients were found to be in good agreement with the results obtained from the CFD-LES model. However the aerodynamic coefficients determined individually, from the CFD-LES model, for each of the traffic and railway decks of the Megane bridge, varied significantly, especially for the downstream traffic deck. Also the pressure distribution and the effect of the spacing between the connecting beams, on the wind speed profiles showed a slight increase in turbulence above the downstream traffic and railway decks.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.485-490
• /
• 2000

Because of occuring easily the crack, debond, lutting on asphalts pavement of bredge decks under traffic's heavy weigt load. We investigated the application of latex modified concrete to resurface and repaire bridge decks for preventing the above problems. Here, Using the ordinary portland cement and high early cement, We rested mix design, workability, compressive strength, adhesive power, drying shrinkage, carbonation, and economic estimation etc. We selected the condition of application to resurface and repaire bridge decks and detected high early cement is superior to ordinary portland cement in results of analyzing the application of the repairing bridge decks and economic estimations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.165-168
• /
• 2006

The major cause of deterioration for the bare concrete bridge decks exposed to de-icing chemicals would be chloride-induced reinforcement corrosion. Thus, in this paper, in order to predict time to corrode for concrete bridge decks on highways, the chloride concentration was measured with depth from the surface. Then, the surface chloride concentration and apparent diffusion coefficient were calculated by regression. The premature failure of bare concrete decks were mostly related with thin cover depth and poor concrete property(high permeability). The good protection of deck surface might contribute to the prolongation of the service life of bare concrete bridge decks.