• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.1-9
• /
• 2010

This paper summarizes an education and training system for the auto-reclosing of power transmission system using a real time digital simulator. The system is developed to understand the principle of reclosing and the sequence of automatic reclosing schemes, and practice the effects of reclosing actions to power system in real-time simulator. This study is concentrated into the following two parts. One is the development of real time education and training system of automatic reclosing schemes. For this, we use the RTDS(real time digital simulator) and the actual digital protective relay. The mathematical relay model of RTDS and the actual distance relay which is equipped automatic reclosing function are also used. The other is the user friendly interface between trainee and trainer. The various interface displays are used for user handing and result display. The conditions of automatic reclosing which is a number of reclosing, reclosing dead time, reset time, and so on, can be changed by the user interface panel. A number of scenario cases are reserved for the education and training. Through the test, we verified that the proposed system can be effectively used to accomplish the education and training of automatic reclosing.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.788-792
• /
• 2009

Gamma $({\gamma})-irradiation$ can be used to control pathogens such as Vibrio vulnificus in seafood. The effects of irradiation on microbial cell populations (%) have been studied in order to develop detection methods for irradiated foods. The method used in this study was ethidium bromide monoazide (EMA) real-time polymerase chain reaction (PCR), using V. vulnificus specific primer, EMA, and $SYBR^{(R)}$ Green to discriminate between ${\gamma}-irradiated$ and non-irradiated cells. Confocal microscope examination showed that ${\gamma}-irradiation$ damaged portions of the cell membrane, allowing EMA to penetrate cells of irradidated V. vulnificus. ${\gamma}-Irradiation$ at 1.08 KGy resulted in log reduction ($-1.15{\pm}0.13$ log reduction) in genomic targets derived from EMA real-time PCR. The combination cold/heat shock resulted in the highest ($-1.74{\pm}0.1$ log reduction) discrimination of dead irradiated V. vulnificus by EMA real-time PCR.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.10
• /
• pp.587-594
• /
• 2005

An adaptive observer for rotor resistance is designed to estimate rotor flux for the a-b model of an induction motor assuming that rotor speed and stator currents are measurable. A singularly perturbed model of the motor is used to design an Adaptive sliding mode observer which drives the estimated stator currents to their true values in the fast time scale. The adaptive observer on the sliding surface is based on the equivalent switching vector and both the estimated fluxes and the estimated rotor resistance converge to their true values. A speed controller considering the effects of parameter variations and external disturbance is proposed in this paper. First, induction motor dynamic model at nominal case is estimated. based on the estimated model, speed controller is designed to match the prescribed speed tracking specifications. Then a dead-time compensator and a robust controller are designed to reduce the effects of parameter variations and external disturbances. the desired speed tracking control performance can be preserved under wide operating range, and good speed load regulating performance. Some simulated results are provided to demonstrate the effectiveness of the Proposed controller.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.23-30
• /
• 2010

A detailed circuit level model requires a small sampling time to represent high frequency switching behaviors with proper resolution. The small sampling time leads a large execution time to obtain the system analysis results. As the alternative of the detailed circuit model, an averaged PWM switch model was proposed for the rapid system level analysis. There exists a voltage distortion between the reference and output voltage because of non-ideal switching characteristics, such as the dead-time, diode forward voltage drop and conduction resistance. This paper analyzed causes and effects of the voltage distortion. The average inverter model, which reflecting this voltage distortion, is developed for the rapid and accurate analysis of automotive electric drive system in MATLAB/Simulink environment. The rapidity and accuracy of the proposed inverter model is proved through comparison between simulation and experiment.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.3
• /
• pp.279-288
• /
• 2004

This paper presents a novel design for a tubular linear brushless permanent-magnet motor. In this design, the magnets in the moving part are oriented in an NS-NS―SN-SN fashion which leads to higher magnetic force near the like-pole region. An analytical methodology to calculate the motor force and to size the actuator was developed. The linear motor is operated in conjunction with a position sensor, three power amplifiers, and a controller to form a complete solution for controlled precision actuation. Real-time digital controllers enhanced the dynamic performance of the motor, and gain scheduling reduced the effects of a nonlinear dead band. In its current state, the motor has a rise time of 30 ms, a settling time of 60 ms, and 25% overshoot to a 5-mm step command. The motor has a maximum speed of 1.5 m/s and acceleration up to 10 g. It has a 10-cm travel range and 26-N maximum pull-out force. The compact size of the motor suggests it could be used in robotic applications requiring moderate force and precision, such as robotic-gripper positioning or actuation. The moving part of the motor can extend significantly beyond its fixed support base. This reaching ability makes it useful in applications requiring a small, direct-drive actuator, which is required to extend into a spatially constrained environment.

• Journal of Periodontal and Implant Science
• /
• v.43 no.2
• /
• pp.72-78
• /
• 2013

Purpose: The purpose of this study was to compare the phototoxic effects of blue light exposure on periodontal pathogens in both planktonic and biofilm cultures. Methods: Strains of Aggregatibacter actinomycetemcomitans, Fusobacterium nucleatum, and Porphyromonas gingivalis, in planktonic or biofilm states, were exposed to visible light at wavelengths of 400.520 nm. A quartz-tungsten-halogen lamp at a power density of $500mW/cm^2$ was used for the light source. Each sample was exposed to 15, 30, 60, 90, or 120 seconds of each bacterial strain in the planktonic or biofilm state. Confocal scanning laser microscopy (CSLM) was used to observe the distribution of live/dead bacterial cells in biofilms. After light exposure, the bacterial killing rates were calculated from colony forming unit (CFU) counts. Results: CLSM images that were obtained from biofilms showed a mixture of dead and live bacterial cells extending to a depth of $30-45{\mu}m$. Obvious differences in the live-to-dead bacterial cell ratio were found in P. gingivalis biofilm according to light exposure time. In the planktonic state, almost all bacteria were killed with 60 seconds of light exposure to F. nucleatum (99.1%) and with 15 seconds to P. gingivalis (100%). In the biofilm state, however, only the CFU of P. gingivalis demonstrated a decreasing tendency with increasing light exposure time, and there was a lower efficacy of phototoxicity to P. gingivalis as biofilm than in the planktonic state. Conclusions: Blue light exposure using a dental halogen curing unit is effective in reducing periodontal pathogens in the planktonic state. It is recommended that an adjunctive exogenous photosensitizer be used and that pathogens be exposed to visible light for clinical antimicrobial periodontal therapy.

• Journal of Environmental Science International
• /
• v.15 no.11
• /
• pp.1035-1043
• /
• 2006

Large scale of fish kills by red tides has been occurred every year in coastal water fisheries of Korea. To suppress red tide spreading out over the south coastal water of the Korean Peninsula large amount of loess has been applied every year because loess is known to be effective in removing red tide organisms. Effects of loess application in ecosystem of underwater near sea shore were investigated with some physical characteristics of loess. Loess used for the red tide reduction consisted of very fine particles, of which size was mostly less than 0.1 mm. Particles of loess blocked light penetration, which is essential for the underwater ecosystem. Loess also pushed pH down by the hydrolysis activities of aluminium and iron It was found that underwater ecosystems where loess was applied near sea shore were devastated. Sea plants such as sea weeds were gone leaving only their roots. Clams and snails were dead under the loess dust blanket. And fishes were not found at all where loess has been sprayed lot long time. It was found that even if loess has some capacity to reduce red tide temporarily, loess application should be slopped to protect underwater ecosystems.

• Korean Journal of Microbiology
• /
• v.9 no.2
• /
• pp.61-68
• /
• 1971

Borrelina virus was inoculated into Hyphantrea cunea DRURY in the labolatory and in the field. The pathogenecity of Borrelina virus upon Bompyx mori L. and Dendrolinus spectabilis BUTLER, too, was examined with following results. 1) $10^8$/ml, $10^7$/ ml, $10^6$/ml concentration of nuclear-polyhedrosis virus was inoculated into the larvae of H.cunea at various ages. The corrected mortality of the larvae were 97.4%, 95.2%, 94.7% in the 3rd instar, and 88.6%, 73.6%, 62.5% in the 6th instar, respectively, with three different concentration of NPV. 2) The symptom of disease of the larvae appeared on 4days after inoculation and most of the larvae were dead within 18 days. 3) The youngest larvae treated with the highest concentration of NPV showed the highest mortality. With older larvae and lower concentriton treated, it appeared that the time needed for death grew longer, marking slower death curve. 4) When we sprayed NPV of $10^6$/ml concentration to H. cunea in the field, the mortality was 94.8% in the first year, 84.6% in the second year and 78.3% in third year. By this, we could admit the continuous effects of the pathogens for several years. 5) About the larvae of B. mori of 3rd and 5th instar and D.spectabilis of 3rd instar inoculated with $10^8$/ml concentration of inoclum, we could not see any pathogenic effects.

• The Korean Journal of Oral and Maxillofacial Pathology
• /
• v.41 no.1
• /
• pp.1-7
• /
• 2017

Lycorine, a natural alkaloid extracted from the Amaryllidaceae plant family, was reported to various physiological and pharmacological effects including anti-cancer activity. Nevertheless, there is no report of the anticancer effect of lycorine in oral cancer cells. The effects of lycorine on cell proliferation and apoptosis were examined through trypan blue exclusion assay, 4'-6-diamidino-2-phenylindole (DAPI) stain, Live/Dead assay, Western blot analysis and RT-PCR. Lycorine suppressed cell viability and induced apoptosis in MC3 and HSC-3 cell lines. Lycorine decreased survivin protein but did not affect its mRNA. It regulated survivin through accelerating protein degradation in a time-dependent manner although neither proteasome nor lysosome was not associated with lycorine-mediated protein degradation. Collectively, our results suggest that lycorine may be a potential therapeutic anti-cancer drug candidate for the treatment of human oral cancer.

• Structural Engineering and Mechanics
• /
• v.51 no.6
• /
• pp.989-1003
• /
• 2014

In the preliminary design stage of an RC 3D-frame, repeated sequential analyses to determine optimal members' sizes and the investigation of the parameters required to minimize the differential column shortening are computational effort consuming, especially when considering various types of loads such as dead load, temperature action, time dependent effects, construction and live loads. Because the desired accuracy at this stage does not justify such luxury, two backpropagation feedforward artificial neural networks have been proposed in order to approximate this information. Instead of using a commercial software package, many references providing advanced principles have been considered to code a program and generate these neural networks. The first one predicts the typical amount of time between two phases, needed to achieve the minimum maximorum differential column shortening. The other network aims to prognosticate sequential analysis results from those of the simultaneous analysis. After the training stages, testing procedures have been carried out in order to ensure the generalization ability of these respective systems. Numerical cases are studied in order to find out how good these ANN match with the sequential finite element analysis. Comparison reveals an acceptable fit, enabling these systems to be safely used in the preliminary design stage.